Nickel Doping in Tin Disulfide Enables Visible Photodetectors with Extended Detection Range and High Responsivity
ACS Applied Materials & Interfaces · 19.03.2025 · 17 (11) · 17045-17054
DOI: 10.1021/acsami.4c22051 ↗Kurz gefasst
Fachartikel in der Zeitschrift ACS Applied Materials & Interfaces, online erschienen am 10.03.2025. Verfasst von Mingchen Xu und 8 weiteren Autor:innen. Beteiligte Einrichtung: State Key Laboratory of Reliability and Intelligence of Electrical Equipment, Hebei University of Technology, Tianjin 300401, China. Die Arbeit wurde bisher 3-mal zitiert (Crossref) und nennt 52 Literaturangaben. Gefördert von: State Key Laboratory of Reliability and Intelligence of Electrical Equipment, National Natural Science Foundation of China, Jilin Scientific and Technological Development Program.
Abstract (Originalsprache)
Visible photodetectors based on two-dimensional tin disulfide (SnS2) have attracted interest for applications in optical communication, information capture, and military reconnaissance owing to their high absorption efficiency, atomic-scale thickness, and nontoxicity. However, their intrinsic bandgap limits their spectral detection range, hindering further practical applications. Herein, we introduce VIII B-nickel (Ni) with a similar ionic radius to Sn to form Ni-doped SnS2 few-layers via micromechanical exfoliation. As the Ni-doping concentration increases, the bandgap decreases from 2.14 (SnS2) to 1.95 eV (Sn0.9Ni0.1S2). Subsequently, Ni-doped SnS2-based photodetectors are fabricated and characterized. These devices exhibit an extended spectral detection range and excellent performance, with a maximum responsivity of 2009 A W-1 and high normalized detectivity of 2.47 × 1012 cm Hz1/2 W-1. Furthermore, to suppress dark current and noise, SnS2/Ni-doped SnS2 homostructures and their corresponding photodetectors are fabricated. The built-in electrical field of the homostructure effectively reduces the dark current of the homostructure photodetector to 110 nA. Consequently, the responsivity is enhanced to 3350 A W-1 and the response time is reduced to 3.5 ms, outperforming most other 2D material-based and commercial photodetectors. And Ni-SnS2 VPDs show an application potential in imaging and visible-light communication systems. Thus, this study presents an effective approach to extend the detection spectrum of SnS2-based photodetectors and pave the way for their future applications.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- State Key Laboratory of Reliability and Intelligence of Electrical Equipment, Hebei University of Technology, Tianjin 300401, China.
- School of Science, Northeast Electric Power University, Jilin 132012, China.
- CNOOC RAIBORN(Tianjin)Technology Co., Ltd, Tianjin 300450, China.
ORCID-Profile: Chao Fan
Förderung
- State Key Laboratory of Reliability and Intelligence of Electrical Equipment
- National Natural Science Foundation of China
- Jilin Scientific and Technological Development Program
Zitieren
APA
Xu, M., Zhu, X., Fan, G., Jia, X., Zhang, Y., Wang, M., Zheng, H., Zhou, P., & Fan, C. (2025). Nickel Doping in Tin Disulfide Enables Visible Photodetectors with Extended Detection Range and High Responsivity. ACS Applied Materials & Interfaces, 17(11), 17045-17054. https://doi.org/10.1021/acsami.4c22051
Vancouver
Xu M, Zhu X, Fan G, Jia X, Zhang Y, Wang M, et al. Nickel Doping in Tin Disulfide Enables Visible Photodetectors with Extended Detection Range and High Responsivity. ACS Applied Materials & Interfaces. 2025;17(11):17045-17054. doi:10.1021/acsami.4c22051
BibTeX
@article{Xu2025,
author = {Xu, Mingchen and Zhu, Xinfa and Fan, Gaoning and Jia, Xiyu and Zhang, Yonghui and Wang, Mengjun and Zheng, Hongxing and Zhou, Pengyu and Fan, Chao},
title = {Nickel Doping in Tin Disulfide Enables Visible Photodetectors with Extended Detection Range and High Responsivity},
journal = {ACS Applied Materials & Interfaces},
year = {2025},
volume = {17},
number = {11},
pages = {17045--17054},
doi = {10.1021/acsami.4c22051}
}
EUVIMED