EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Molecular N‐Type Doping Enables Schottky Interface Engineering in HTL‐Free Self‐Powered Perovskite Photodetectors: From Visible to Near‐Infrared Detection

Shu‐Yu Yang, Kai‐Chun Chang, Yi‐Sheng Lin, Zhi‐Hao Huang, Min‐Hsuan Tsai, Huan‐Wei Lin, Wei‐Jia Qiu, Shang‐Yen Hsieh, Yu‐Ching Huang, Shun‐Wei Liu, Chieh‐Ting Lin

Advanced Optical Materials · 13.11.2026

DOI: 10.1002/adom.72034 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Advanced Optical Materials, online erschienen am 13.11.2026. Verfasst von Shu‐Yu Yang und 10 weiteren Autor:innen. Die Arbeit nennt 31 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Science and Technology Council.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Hole‐transport‐layer‐free perovskite photodetectors offer a simplified architecture for self‐powered optoelectronics, but weak interfacial band bending and carrier back‐injection at the transparent electrode/perovskite contact limit their performance. Herein, we introduce direct incorporation of N‐DMBI into methylammonium lead iodide (MAPbI 3 ) absorber layers as a molecular n‐type doping strategy to engineer the indium tin oxide (ITO)/MAPbI 3 Schottky interface. Hydride‐transfer‐enabled electron donation modulates the Fermi‐level alignment without significantly altering the optical bandgap, thereby strengthening the built‐in potential and suppressing dark‐condition electron back‐injection. An optimized N‐DMBI concentration of 2.0 mM balances interfacial band engineering with bulk film quality preservation, yielding an ultralow dark current density of 1.39 × 10 −12 A cm −2 , a responsivity of 0.388 A W −1 at 630 nm under zero bias, a Johnson‐noise‐limited detectivity of 2.24 × 10 13 Jones at 630 nm under zero bias, a linear dynamic range of 127 dB, and microsecond‐scale response times. Building on this, we further extend the molecular doping strategy to narrow‐bandgap tin‐lead perovskite, achieving a dark current density of 1.33 × 10 −10 A cm −2 and a detectivity of 3.81 × 10 12 Jones at 940 nm under zero bias, confirming the generalizability of this approach across perovskite compositions and broadening photodetection into the near‐infrared region.

Förderung

  • National Science and Technology Council

Zitieren

APA

Yang, S., Chang, K., Lin, Y., Huang, Z., Tsai, M., Lin, H., Qiu, W., Hsieh, S., Huang, Y., Liu, S., & Lin, C. (2026). Molecular N‐Type Doping Enables Schottky Interface Engineering in HTL‐Free Self‐Powered Perovskite Photodetectors: From Visible to Near‐Infrared Detection. Advanced Optical Materials. https://doi.org/10.1002/adom.72034

Vancouver

Yang S, Chang K, Lin Y, Huang Z, Tsai M, Lin H, et al. Molecular N‐Type Doping Enables Schottky Interface Engineering in HTL‐Free Self‐Powered Perovskite Photodetectors: From Visible to Near‐Infrared Detection. Advanced Optical Materials. 2026. doi:10.1002/adom.72034

BibTeX
@article{Yang2026,
  author = {Yang, Shu‐Yu and Chang, Kai‐Chun and Lin, Yi‐Sheng and Huang, Zhi‐Hao and Tsai, Min‐Hsuan and Lin, Huan‐Wei and Qiu, Wei‐Jia and Hsieh, Shang‐Yen and Huang, Yu‐Ching and Liu, Shun‐Wei and Lin, Chieh‐Ting},
  title = {Molecular N‐Type Doping Enables Schottky Interface Engineering in HTL‐Free Self‐Powered Perovskite Photodetectors: From Visible to Near‐Infrared Detection},
  journal = {Advanced Optical Materials},
  year = {2026},
  doi = {10.1002/adom.72034}
}
Kostenlos starten →