Replacing the Gallium Oxide Shell with Conductive Ag: Toward a Printable and Recyclable Composite for Highly Stretchable Electronics, Electromagnetic Shielding, and Thermal Interfaces
ACS Applied Materials & Interfaces · 2024-11-06 · 16 (44) · 61157-61168
DOI: 10.1021/acsami.4c17151 ↗At a glance
Journal article in ACS Applied Materials & Interfaces, published online on 2024-10-29. Written by Abdollah Hajalilou and 6 co-authors. Institution: Institute of Systems and Robotics, Department of Electrical Engineering, University of Coimbra, Coimbra 3030-290, Portugal. Cited 31 times so far (Crossref); 69 references. Funded by: European Regional Development Fund, H2020 European Research Council, Funda??o para a Ci?ncia e a Tecnologia.
Abstract (original language)
Liquid metal (LM)-based composites hold promise for soft electronics due to their high conductivity and fluidic nature. However, the presence of α-Ga2O3 and GaOOH layers around LM droplets impairs conductivity and performance. We tackle this issue by replacing the oxide layer with conductive silver (Ag) using an ultrasonic-assisted galvanic replacement reaction. The Ag-coated nanoparticles form aggregated, porous microparticles that are mixed with styrene-isoprene-styrene (SIS) polymers, resulting in a digitally printable composite with superior electrical conductivity and electromechanical properties compared to conventional fillers. Adding more LM enhances these properties further. The composite achieves EMI shielding effectiveness (SE) exceeding 75 dB in the X-band frequency range, even at 200% strain, meeting stringent military and medical standards. It is applicable in wireless communications and Bluetooth signal blocking and as a thermal interface material (TIM). Additionally, we highlight its recyclability using a biodegradable solvent, underscoring its eco-friendly potential. This composite represents a significant advancement in stretchable electronics and EMI shielding, with implications for wearable and bioelectronic applications.
Subjects
Author keywords
Authors and institutions
- Institute of Systems and Robotics, Department of Electrical Engineering, University of Coimbra, Coimbra 3030-290, Portugal.
- Instituto de Telecomunicações and Department of Electrical Engineering, University of Coimbra, 3030-290 Coimbra, Portugal.
- Biosystems and Integrative Sciences Institute (BioISI), Faculdade de Ciências, Universidade de Lisboa, 1749-016 Lisboa, Portugal.
ORCID profiles: Abdollah Hajalilou, Tiago A Morgado, Mahmoud Tavakoli
Funding
- European Regional Development Fund
- H2020 European Research Council
- Funda??o para a Ci?ncia e a Tecnologia
- European Structural and Investment Funds
Cite
APA
Hajalilou, A., Parvini, E., Morgado, T. A., Alhais Lopes, P., Melo Jorge, M. E., Freitas, M., & Tavakoli, M. (2024). Replacing the Gallium Oxide Shell with Conductive Ag: Toward a Printable and Recyclable Composite for Highly Stretchable Electronics, Electromagnetic Shielding, and Thermal Interfaces. ACS Applied Materials & Interfaces, 16(44), 61157-61168. https://doi.org/10.1021/acsami.4c17151
Vancouver
Hajalilou A, Parvini E, Morgado TA, Alhais Lopes P, Melo Jorge ME, Freitas M, et al. Replacing the Gallium Oxide Shell with Conductive Ag: Toward a Printable and Recyclable Composite for Highly Stretchable Electronics, Electromagnetic Shielding, and Thermal Interfaces. ACS Applied Materials & Interfaces. 2024;16(44):61157-61168. doi:10.1021/acsami.4c17151
BibTeX
@article{Hajalilou2024,
author = {Hajalilou, Abdollah and Parvini, Elahe and Morgado, Tiago A and Alhais Lopes, Pedro and Melo Jorge, M Estrela and Freitas, Marta and Tavakoli, Mahmoud},
title = {Replacing the Gallium Oxide Shell with Conductive Ag: Toward a Printable and Recyclable Composite for Highly Stretchable Electronics, Electromagnetic Shielding, and Thermal Interfaces},
journal = {ACS Applied Materials & Interfaces},
year = {2024},
volume = {16},
number = {44},
pages = {61157--61168},
doi = {10.1021/acsami.4c17151}
}
EUVIMED