EUVIMEDEUVIMED entdecken
Crossref

Strontium-Substituted Nanohydroxyapatite Containing Biodegradable 3D Printed Composite Scaffolds for Bone Regeneration

Shazia Shaikh iD, Shreya Mehrotra iD, Bas van Bochove, Arun Kumar Teotia iD, Prerna Singh, Isabella Laurén iD, Nina C Lindfors, Jukka Seppälä iD, Ashok Kumar iD

ACS Applied Materials & Interfaces · 2024

DOI: 10.1021/acsami.4c16195 ↗

Kurz gefasst

Fachartikel in der Zeitschrift ACS Applied Materials & Interfaces, 2024. Verfasst von Shazia Shaikh und 8 weiteren Autor:innen. Beteiligte Einrichtung: Department of Biological Sciences and Bioengineering, Indian Institute of Technology Kanpur, Kanpur 208016, Uttar Pradesh, India. Hauptthemen laut MEDLINE: Printing, Three-Dimensional, Bone Regeneration, Strontium, Tissue Scaffolds. Die Arbeit wurde bisher 6-mal zitiert (Crossref) und nennt 58 Literaturangaben. Gefördert von: Indian Council of Medical Research, Science and Engineering Research Board, Department of Biotechnology, Ministry of Science and Technology, India.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Kein Abstract verfügbar.

Schlagwörter

MeSH-Schlagwörter (MEDLINE)

Printing, Three-DimensionalBone RegenerationStrontiumTissue ScaffoldsDurapatiteAnimalsRatsBone SubstitutesBiocompatible MaterialsMaleRats, Sprague-Dawley

Stichwörter der Autor:innen

3D-printingbioactive moleculesbone regenerationdigital light processingpoly(trimethylene carbonate)strontium substituted nanohydroxyapatite

Substanzen

StrontiumDurapatiteBone SubstitutesBiocompatible Materials

Autor:innen und Institutionen

  • Department of Biological Sciences and Bioengineering, Indian Institute of Technology Kanpur, Kanpur 208016, Uttar Pradesh, India.
  • Center for Environmental Science and Engineering, Indian Institute of Technology Kanpur, Kanpur 208016, Uttar Pradesh, India.
  • Advanced Organ bioengineering and Therapeutics, Faculty of Science and Technology, University of Twente, Drienerlolaan 5, Enschede 7522 NB, The Netherlands.
  • Polymer Technology, School of Chemical Engineering, Aalto University, Espoo, FI-00076 Finland.
  • Department of Musculoskeletal and Plastic Surgery, University of Helsinki, Helsinki 00014, Finland.
  • Helsinki University Central Hospital, Helsinki 00280, Finland.

ORCID-Profile: Shazia Shaikh, Shreya Mehrotra, Arun Kumar Teotia, Isabella Laurén, Jukka Seppälä, Ashok Kumar

Förderung

  • Indian Council of Medical Research
  • Science and Engineering Research Board
  • Department of Biotechnology, Ministry of Science and Technology, India
  • Department of Science and Technology, Ministry of Science and Technology, India
  • Ministry of Education, India
  • Research Council of Finland
  • Ortho Regenics Private Limited
  • Aalto-India Go-global funding

Zitieren

APA

Shaikh, S., Mehrotra, S., van Bochove, B., Teotia, A. K., Singh, P., Laurén, I., Lindfors, N. C., Seppälä, J., & Kumar, A. (2024). Strontium-Substituted Nanohydroxyapatite Containing Biodegradable 3D Printed Composite Scaffolds for Bone Regeneration. ACS Applied Materials & Interfaces. https://doi.org/10.1021/acsami.4c16195

Vancouver

Shaikh S, Mehrotra S, van Bochove B, Teotia AK, Singh P, Laurén I, et al. Strontium-Substituted Nanohydroxyapatite Containing Biodegradable 3D Printed Composite Scaffolds for Bone Regeneration. ACS Applied Materials & Interfaces. 2024. doi:10.1021/acsami.4c16195

BibTeX
@article{Shaikh2024,
  author = {Shaikh, Shazia and Mehrotra, Shreya and van Bochove, Bas and Teotia, Arun Kumar and Singh, Prerna and Laurén, Isabella and Lindfors, Nina C and Seppälä, Jukka and Kumar, Ashok},
  title = {Strontium-Substituted Nanohydroxyapatite Containing Biodegradable 3D Printed Composite Scaffolds for Bone Regeneration},
  journal = {ACS Applied Materials & Interfaces},
  year = {2024},
  doi = {10.1021/acsami.4c16195}
}
Kostenlos starten →