Electrolyte Additive l -Lysine Stabilizes the Zinc Electrode in Aqueous Zinc Batteries for Long Cycling Performance
ACS Applied Materials & Interfaces · 02.10.2024 · 16 (39) · 53242-53251
DOI: 10.1021/acsami.4c11404 ↗Kurz gefasst
Fachartikel in der Zeitschrift ACS Applied Materials & Interfaces, online erschienen am 23.09.2024. Verfasst von Jiayi Yin und 5 weiteren Autor:innen. Beteiligte Einrichtung: College of Materials Science and Engineering, Hunan University, Changsha 410082, P. R. China. Die Arbeit wurde bisher 34-mal zitiert (Crossref) und nennt 45 Literaturangaben. Gefördert von: Science, Technology and Innovation Commission of Shenzhen Municipality, National Natural Science Foundation of China.
Abstract (Originalsprache)
Rechargeable aqueous Zn-ion batteries (AZIBs) have been recognized as competitive devices for large-scale energy storage due to their characteristics of low cost, safe operation, and environmental friendliness. Nevertheless, their practical applications are greatly limited by zinc dendrite growth and side reactions occurring at the anode/electrolyte interface. Herein, we propose an effective and simple electrolyte engineering strategy, which is the introduction of l-lysine additive containing two amino groups and one carboxyl group into a ZnSO4 electrolyte to achieve stable and reversible Zn depositions. Theoretical calculations and experimental results reveal that the l-lysine can adsorb on the Zn anode surface due to the strong coordination effects between amino groups and Zn metal (Zn-N binding) and induce the reduction of ZnSO4 into inorganic ZnS, which can not only prevent interfacial side reactions but also regulate interfacial electric field on the zinc electrode surface to guide uniform Zn2+ electrodeposition to inhibit zinc dendrites. Consequently, the l-lysine additive in the electrolyte enables Zn||Zn symmetric cells to achieve an ultralong stable cycling up to 2400 h at 1 mA cm-2 with a low polarization of only about 16 mV and Zn||Cu asymmetric cells to obtain a high average Coulombic efficiency of 99.80% after stably cycling for more than 2000 h at 2 mA cm-2 (1 mAh cm-2). In addition, the Zn||MnO2@CNT full cell in an l-lysine-containing electrolyte also exhibits good cycling performance. This study offers a new perspective on multifunctional electrolyte additive for achieving highly reversible Zn metal anodes in AZIBs.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- College of Materials Science and Engineering, Hunan University, Changsha 410082, P. R. China.
- CAS Key Laboratory of Materials for Energy Conversion, Shanghai Institute of Ceramics, Chinese Academy of Sciences, Shanghai 200050, P. R. China.
- University of Chinese Academy of Science, Beijing 100049, P. R. China.
- The State Key Lab High Performance Ceram & Superfine, Shanghai Institute of Ceramics, Chinese Academy of Sciences, Shanghai 200050, P. R. China.
ORCID-Profile: Kunkun Guo, Zhaoyin Wen
Förderung
- Science, Technology and Innovation Commission of Shenzhen Municipality
- National Natural Science Foundation of China
Zitieren
APA
Yin, J., Luo, Y., Li, M., Wu, M., Guo, K., & Wen, Z. (2024). Electrolyte Additive l -Lysine Stabilizes the Zinc Electrode in Aqueous Zinc Batteries for Long Cycling Performance. ACS Applied Materials & Interfaces, 16(39), 53242-53251. https://doi.org/10.1021/acsami.4c11404
Vancouver
Yin J, Luo Y, Li M, Wu M, Guo K, Wen Z. Electrolyte Additive l -Lysine Stabilizes the Zinc Electrode in Aqueous Zinc Batteries for Long Cycling Performance. ACS Applied Materials & Interfaces. 2024;16(39):53242-53251. doi:10.1021/acsami.4c11404
BibTeX
@article{Yin2024,
author = {Yin, Jiayi and Luo, Yuzhe and Li, Meng and Wu, Meifen and Guo, Kunkun and Wen, Zhaoyin},
title = {Electrolyte Additive l -Lysine Stabilizes the Zinc Electrode in Aqueous Zinc Batteries for Long Cycling Performance},
journal = {ACS Applied Materials & Interfaces},
year = {2024},
volume = {16},
number = {39},
pages = {53242--53251},
doi = {10.1021/acsami.4c11404}
}
EUVIMED