EUVIMEDObjevte EUVIMED
Crossref

Enhanced Corrosion Protection of Printed Circuit Board Electronics using Cold Atmospheric Plasma-Assisted SiO x Coatings

Venkat Kasi iD, Jia-Huei Tien, Md Mahabubur Rahman, Muhammad Masud Rana, Ulisses Alberto Heredia Rivera iD, Zhongxia Shang iD, Advika Vidhyadhiraja, Jingxuan Zhang iD, Jeffrey P Youngblood iD, David F Bahr, Rahim Rahimi iD

ACS Applied Materials & Interfaces · 2024-09-11 · 16 (36) · 48293-48306

DOI: 10.1021/acsami.4c09751 ↗

At a glance

Journal article in ACS Applied Materials & Interfaces, published online on 2024-09-02. Written by Venkat Kasi and 10 co-authors. Institution: School of Materials Engineering, Purdue University, West Lafayette, Indiana 47907, United States. Cited 12 times so far (Crossref); 74 references. Funded by: School of Materials Engineering, Purdue University, Center for Surface Engineering and Enhancement, Purdue University.

AbstraktSubjectsBibliografické údajeCiteRelated studies

Abstract (original language)

The miniaturization and widespread deployment of electronic devices across diverse environments have heightened their vulnerability to corrosion, particularly affecting copper traces within printed circuit boards (PCBs). Conventional protective methods, such as conformal coatings, face challenges including the necessity for a critical thickness to ensure effective barrier properties and the requirement for multiple steps of drying and curing to eliminate solvent entrapment within polymer coatings. This study investigates cold atmospheric plasma (CAP) as an innovative technique for directly depositing ultrathin silicon oxide (SiOx) coatings onto copper surfaces to enhance corrosion protection in PCBs. A systematic investigation was undertaken to examine how the scanning speed of the CAP deposition head impacts the film quality and corrosion resistance. The research aims to determine the optimal scanning speed of the CAP deposition head that achieves complete surface coverage while promoting effective cross-linking and minimizing unreacted precursor entrapment, resulting in superior electrical barrier and mechanical properties. The CAP coating process demonstrated the capability of depositing SiOx onto copper surfaces at various thicknesses ranging from 70 to 1110 nm through a single deposition process by simply adjusting the scanning speed of the plasma head (5-75 mm/s). Evaluation of material corrosion barrier characteristics revealed that scanning speeds of 45 mm/s of the plasma deposition head provided an effective coating thickness of 140 nm, exhibiting superior corrosion resistance (30-fold) compared to that of uncoated copper. As a proof of concept, the efficacy of CAP-deposited SiOx coatings was demonstrated by protecting an LED circuit in saltwater and by coating printed circuits for potential agricultural sensor applications. These CAP-deposited coatings offer performance comparable to or superior to traditional conformal polymeric coatings. This research presents CAP-deposited SiOx coatings as a promising approach for effective and scalable corrosion protection in miniaturized electronics.

Subjects

Author keywords

SiOx coatingcold atmospheric plasmacorrosion resistanceelectronic packagingmoisture resistantprinted electronicsthin-film nanocoating

Authors and institutions

  • School of Materials Engineering, Purdue University, West Lafayette, Indiana 47907, United States.
  • Birck Nanotechnology Center, Purdue University, West Lafayette, Indiana 47907, United States.
  • School of Electrical and Computer Engineering, Purdue University, West Lafayette, Indiana 47907, United States.

ORCID profiles: Venkat Kasi, Ulisses Alberto Heredia Rivera, Zhongxia Shang, Jingxuan Zhang, Jeffrey P Youngblood, Rahim Rahimi

Funding

  • School of Materials Engineering, Purdue University
  • Center for Surface Engineering and Enhancement, Purdue University

Cite

APA

Kasi, V., Tien, J. H., Rahman, M. M., Rana, M. M., Heredia Rivera, U. A., Shang, Z., Vidhyadhiraja, A., Zhang, J., Youngblood, J. P., Bahr, D. F., & Rahimi, R. (2024). Enhanced Corrosion Protection of Printed Circuit Board Electronics using Cold Atmospheric Plasma-Assisted SiO x Coatings. ACS Applied Materials & Interfaces, 16(36), 48293-48306. https://doi.org/10.1021/acsami.4c09751

Vancouver

Kasi V, Tien JH, Rahman MM, Rana MM, Heredia Rivera UA, Shang Z, et al. Enhanced Corrosion Protection of Printed Circuit Board Electronics using Cold Atmospheric Plasma-Assisted SiO x Coatings. ACS Applied Materials & Interfaces. 2024;16(36):48293-48306. doi:10.1021/acsami.4c09751

BibTeX
@article{Kasi2024,
  author = {Kasi, Venkat and Tien, Jia-Huei and Rahman, Md Mahabubur and Rana, Muhammad Masud and Heredia Rivera, Ulisses Alberto and Shang, Zhongxia and Vidhyadhiraja, Advika and Zhang, Jingxuan and Youngblood, Jeffrey P and Bahr, David F and Rahimi, Rahim},
  title = {Enhanced Corrosion Protection of Printed Circuit Board Electronics using Cold Atmospheric Plasma-Assisted SiO x Coatings},
  journal = {ACS Applied Materials & Interfaces},
  year = {2024},
  volume = {16},
  number = {36},
  pages = {48293--48306},
  doi = {10.1021/acsami.4c09751}
}
Start for free →