EUVIMEDOpdag EUVIMED
Crossref

Empowering Low-Temperature Lithium–Sulfur Batteries: Unlocking the Potential of Transition Metal Alloy-Based Cathode Materials

Junye Shi, Nimra Khan, Ning Gao, Chenxi Yu, Bao Li, Bao Wang iD, Shumin Zheng

ACS Applied Materials & Interfaces · 2024-08-14 · 16 (32) · 42312-42320

DOI: 10.1021/acsami.4c09360 ↗

At a glance

Journal article in ACS Applied Materials & Interfaces, published online on 2024-07-30. Written by Junye Shi and 6 co-authors. Institution: Institute of Refrigeration and Cryogenics, Shanghai Jiao Tong University, Shanghai 200433, China. Cited 8 times so far (Crossref); 16 references. Funded by: National Natural Science Foundation of China.

AbstractSubjectsBibliografiske oplysningerCiteRelated studies

Abstract (original language)

At low temperatures, lithium-sulfur (Li-S) batteries have poor kinetics, resulting in extreme polarization and decreased capacity. In this study, we investigated the electrochemical performance of Li-S batteries utilizing transition metal alloy-based cathode materials. Specifically, binary transition metal alloys (FeNi, FeCo, and NiCo) are integrated into a porous carbon nanofiber (CNF) matrix as composite cathode material. Our findings reveal that alloying metallic Ni with Fe in the FeNi@CNFs composite enhances the catalytic conversion of sulfur species, mitigating the shuttle effect and improving battery performance even under low temperatures. Li-S batteries employing a Li2S6/FeNi@CNFs cathode exhibited a significantly high initial discharge capacity of 1655 mAh g-1 at 0.1 C. Even at the higher current density of 10 C, the Li2S6/FeNi@CNFs composite can still reach an ultrahigh specific capacity of 828 mAh g-1. In addition, Li2S6/FeNi@CNFs demonstrated exceptional initial discharge capacities of 890.5 and 382.7 mAh g-1 at 0.1 C under -20 and -40 °C, respectively. With an initial capacity of 392.02 mAh g-1 and a capacity retention rate of 88.86% (after 60 cycles) at 0.2 C, the conversion of LiPSs in Li2S6/FeNi@CNFs is significantly enhanced even at ultralow temperatures of -40 °C. The findings of this study hold significant implications for the advancement of extremely low-temperature Li-S batteries.

Subjects

Author keywords

CathodeKineticsLithium−Sulfur BatteriesLow TemperatureTransition Metal Alloy

Authors and institutions

  • Institute of Refrigeration and Cryogenics, Shanghai Jiao Tong University, Shanghai 200433, China.
  • State Key Laboratory of Biochemical Engineering, Institute of Process Engineering, Chinese Academy of Sciences, Beijing 100190, China.
  • Key Laboratory of Biopharmaceutical Preparation and Delivery, Chinese Academy of Sciences, Beijing 100190, China.
  • School of Chemistry and Chemical Engineering, Henan Normal University, Xinxiang, 453007, China.

ORCID profiles: Bao Wang

Funding

  • National Natural Science Foundation of China

Cite

APA

Shi, J., Khan, N., Gao, N., Yu, C., Li, B., Wang, B., & Zheng, S. (2024). Empowering Low-Temperature Lithium–Sulfur Batteries: Unlocking the Potential of Transition Metal Alloy-Based Cathode Materials. ACS Applied Materials & Interfaces, 16(32), 42312-42320. https://doi.org/10.1021/acsami.4c09360

Vancouver

Shi J, Khan N, Gao N, Yu C, Li B, Wang B, et al. Empowering Low-Temperature Lithium–Sulfur Batteries: Unlocking the Potential of Transition Metal Alloy-Based Cathode Materials. ACS Applied Materials & Interfaces. 2024;16(32):42312-42320. doi:10.1021/acsami.4c09360

BibTeX
@article{Shi2024,
  author = {Shi, Junye and Khan, Nimra and Gao, Ning and Yu, Chenxi and Li, Bao and Wang, Bao and Zheng, Shumin},
  title = {Empowering Low-Temperature Lithium–Sulfur Batteries: Unlocking the Potential of Transition Metal Alloy-Based Cathode Materials},
  journal = {ACS Applied Materials & Interfaces},
  year = {2024},
  volume = {16},
  number = {32},
  pages = {42312--42320},
  doi = {10.1021/acsami.4c09360}
}
Start for free →