EUVIMEDObjevte EUVIMED
Crossref

Crystallinity Control and Strain Release in Wide-Bandgap Perovskite Film via Seed-Induced Growth for Efficient Photovoltaics

Haoran Yang, Kai Wu, Haikuo Guo, Jiali Wei, Jingwei Guo, Rui Liu, Xin Wang, Yali Bai, Yue Xu, Tiantian Li iD, Chengjun Zhu iD, Fuhua Hou iD

ACS Applied Materials & Interfaces · 2024-08-14 · 16 (32) · 42566-42576

DOI: 10.1021/acsami.4c08445 ↗

At a glance

Journal article in ACS Applied Materials & Interfaces, published online on 2024-08-01. Written by Haoran Yang and 11 co-authors. Institution: School of Physical Science and Technology, Key Laboratory of Semiconductor Photovoltaic Technology and Energy Materials at Universities of Inner Mong…. Cited 9 times so far (Crossref); 66 references. Funded by: Research Program of Science and Technology at Universities of Inner Mongolia Autonomous Region, Inner Mongolia University, National Natural Science Foundation of China.

AbstraktSubjectsBibliografické údajeCiteRelated studies

Abstract (original language)

The seed method stands out as a straightforward and efficient approach for fabricating high-performance perovskite solar cells (PSCs). In this study, we propose the utilization of an antisolvent as an additive to induce crystal seeding, thereby facilitating the growth of wide-bandgap perovskite grains. Specifically, we introduce three commonly used antisolvents─ethyl acetate (EA), isopropanol (IPA), and chlorobenzene (CB)─directly into the perovskite precursor solution to generate perovskite seeds, which serve to promote subsequent nucleation. This antisolvent-crystal seeding method (ACSM) results in increased grain sizes, reduced film defects, and overall improved film quality. Consequently, the power conversion efficiencies (PCEs) of 1.647 eV PSCs with EA, IPA, and CB additives are recorded at 19.86%, 20.61%, and 20.45%, respectively, surpassing that of the reference device with a PCE of 18.83%. Furthermore, the stability of the PSCs prepared through ACSM is notably enhanced. Notably, PSCs optimized with IPA retain 75% of the original PCE after being stored in ambient air conditions (25 °C, RH ∼ 15%) for 30 days, better than the CB-added (64%) and the EA-added devices (53%), while the reference devices only retain 31% of the initial PCE. Moreover, even after continuous thermal annealing at 50 °C for 200 h, IPA-assisted devices demonstrate the best stability, followed by those with CB and EA, with the reference exhibiting the poorest stability.

Subjects

Author keywords

additiveantisolventperovskite solar cellseed-induced growthwide bandgaps

Authors and institutions

  • School of Physical Science and Technology, Key Laboratory of Semiconductor Photovoltaic Technology and Energy Materials at Universities of Inner Mongolia Autonomous Region, Inner Mongolia University, Hohhot 010021, Chin…

ORCID profiles: Tiantian Li, Chengjun Zhu, Fuhua Hou

Funding

  • Research Program of Science and Technology at Universities of Inner Mongolia Autonomous Region
  • Inner Mongolia University
  • National Natural Science Foundation of China
  • Education Department of Inner Mongolia Autonomous Region

Cite

APA

Yang, H., Wu, K., Guo, H., Wei, J., Guo, J., Liu, R., Wang, X., Bai, Y., Xu, Y., Li, T., Zhu, C., & Hou, F. (2024). Crystallinity Control and Strain Release in Wide-Bandgap Perovskite Film via Seed-Induced Growth for Efficient Photovoltaics. ACS Applied Materials & Interfaces, 16(32), 42566-42576. https://doi.org/10.1021/acsami.4c08445

Vancouver

Yang H, Wu K, Guo H, Wei J, Guo J, Liu R, et al. Crystallinity Control and Strain Release in Wide-Bandgap Perovskite Film via Seed-Induced Growth for Efficient Photovoltaics. ACS Applied Materials & Interfaces. 2024;16(32):42566-42576. doi:10.1021/acsami.4c08445

BibTeX
@article{Yang2024,
  author = {Yang, Haoran and Wu, Kai and Guo, Haikuo and Wei, Jiali and Guo, Jingwei and Liu, Rui and Wang, Xin and Bai, Yali and Xu, Yue and Li, Tiantian and Zhu, Chengjun and Hou, Fuhua},
  title = {Crystallinity Control and Strain Release in Wide-Bandgap Perovskite Film via Seed-Induced Growth for Efficient Photovoltaics},
  journal = {ACS Applied Materials & Interfaces},
  year = {2024},
  volume = {16},
  number = {32},
  pages = {42566--42576},
  doi = {10.1021/acsami.4c08445}
}
Start for free →