EUVIMEDOpdag EUVIMED
Crossref

A Flexible Capacitive Pressure Sensor with Adjustable Detection Range Based on the Inflatable Dielectric Layer for Human–Computer Interaction

Yuxia Li, Zhifu Chen, Kun Zhang, Shuo Wang, Xiaofei Bu, Jiapeng Tan, Wenzheng Song, Zhichao Mu, Peng Zhang iD, Liangsong Huang iD

ACS Applied Materials & Interfaces · 2024-07-31 · 16 (30) · 40250-40262

DOI: 10.1021/acsami.4c08387 ↗

At a glance

Journal article in ACS Applied Materials & Interfaces, published online on 2024-07-20. Written by Yuxia Li and 9 co-authors. Institution: College of Electrical Engineering and Automation, Shandong University of Science and Technology, Qingdao 266590, China. Major MEDLINE topics: Wearable Electronic Devices, Pressure. Cited 45 times so far (Crossref); 42 references. Funded by: Major Research Plan, China Association for Science and Technology, China Postdoctoral Science Foundation.

AbstractSubjectsBibliografiske oplysningerCiteRelated studies

Abstract (original language)

As an essential component in wearable electronic devices and intelligent robots, flexible pressure sensors have enormous application value in fields such as healthcare, human-computer interaction, and intelligent perception. However, due to the complex and ever-changing pressure loads borne by sensors in different application scenarios, this also puts great demands on the flexible response and adjustment ability of a sensor's detection range. Therefore, developing a flexible pressure sensor with a wide and adjustable detection range, which can be applied flexibly under different pressure loads, is also a major challenge in current research. In this paper, we propose a flexible pressure sensor with a wide and adjustable detection range based on an inflatable adjustable safety airbag as the dielectric layer. This sensor uses inflatable airbags prepared using 3D printing technology and silicone reverse molding technology as the dielectric layer and achieves high sensitivity (0.6 kPa-1 to 1.19 kPa-1), wide detection range (220-1500 kPa), and flexible performance applicability by adjusting the air pressure inside the dielectric layer. At the same time, its simple production process, convenient production, fast response time (100 ms), and good stability provide the possibility for the flexible application of sensors in different pressure detection. The experimental results indicate that the sensor has enormous potential for applications in wearable devices, healthcare, human-computer interaction, and intelligent perception recognition.

Subjects

MeSH terms (MEDLINE)

Wearable Electronic DevicesPressureHumansElectric CapacitancePrinting, Three-DimensionalEquipment Design

Author keywords

adjustable detection rangeexcellent performance flexibilityflexible pressure sensorhuman-computer interactioninflatable airbag

Authors and institutions

  • College of Electrical Engineering and Automation, Shandong University of Science and Technology, Qingdao 266590, China.

ORCID profiles: Peng Zhang, Liangsong Huang

Funding

  • Major Research Plan
  • China Association for Science and Technology
  • China Postdoctoral Science Foundation
  • Major Scientific and Technological Innovation Project of Shandong Province
  • National Natural Science Foundation of China

Cite

APA

Li, Y., Chen, Z., Zhang, K., Wang, S., Bu, X., Tan, J., Song, W., Mu, Z., Zhang, P., & Huang, L. (2024). A Flexible Capacitive Pressure Sensor with Adjustable Detection Range Based on the Inflatable Dielectric Layer for Human–Computer Interaction. ACS Applied Materials & Interfaces, 16(30), 40250-40262. https://doi.org/10.1021/acsami.4c08387

Vancouver

Li Y, Chen Z, Zhang K, Wang S, Bu X, Tan J, et al. A Flexible Capacitive Pressure Sensor with Adjustable Detection Range Based on the Inflatable Dielectric Layer for Human–Computer Interaction. ACS Applied Materials & Interfaces. 2024;16(30):40250-40262. doi:10.1021/acsami.4c08387

BibTeX
@article{Li2024,
  author = {Li, Yuxia and Chen, Zhifu and Zhang, Kun and Wang, Shuo and Bu, Xiaofei and Tan, Jiapeng and Song, Wenzheng and Mu, Zhichao and Zhang, Peng and Huang, Liangsong},
  title = {A Flexible Capacitive Pressure Sensor with Adjustable Detection Range Based on the Inflatable Dielectric Layer for Human–Computer Interaction},
  journal = {ACS Applied Materials & Interfaces},
  year = {2024},
  volume = {16},
  number = {30},
  pages = {40250--40262},
  doi = {10.1021/acsami.4c08387}
}
Start for free →