EUVIMEDOpdag EUVIMED
Crossref

Copper Polypropylene Metal Plastic Composite Copper Foil: Future-Proof Anode Current Collector Solution for Lithium-Ion Batteries with High Energy Density

Jing Niu, Xianli Huang iD, Hui Yang, Datuan Li, Xingxu Gao, Ling Yang, Qian Chen, Ao Sun, Kejun Zheng, Tao Wang iD, Jianping He iD

ACS Applied Materials & Interfaces · 2024-10-23 · 16 (42) · 57603-57613

DOI: 10.1021/acsami.4c08053 ↗

At a glance

Journal article in ACS Applied Materials & Interfaces, published online on 2024-10-12. Written by Jing Niu and 10 co-authors. Institution: College of Material Science and Technology, Nanjing University of Aeronautics and Astronautics, 211006, Nanjing, Jiangsu Province People's Republic o…. Cited 23 times so far (Crossref); 61 references. Funded by: Fundamental Research Funds for the Central Universities, National Natural Science Foundation of China, Priority Academic Program Development of Jiangsu Higher Education Institutions.

AbstractSubjectsBibliografiske oplysningerCiteRelated studies

Abstract (original language)

Composite copper foil is considered to be the future-proof anode current collector solution for lithium-ion batteries (LIBs) with high energy density, for its light weight and low cost. Polypropylene (PP) film is widely used as the support layer of composite copper foil current collectors (CCs) due to its excellent mechanical properties and chemical stability. However, the interface adhesion between the PP layer and the copper layer is weak, due to the significant difference in surface energy. In this study, we prepared a hydrophilic PP film by air plasma treatment. After magnetron sputtering and electroplating, the composite copper foil (PP@Cu-1) with strong adhesion was then successfully prepared. In the T-peel test, for PP@Cu-1, the pull required to separate PP from the copper layer is approximately 7 times that of PP@Cu-0. The PP@Cu-1 composite copper foil exhibits excellent electrochemical properties when applied to LIBs. As an anode CC material, it could be a favorable competitor to conventional commercial Bare Cu and holds broad prospects for application in high-energy-density LIBs.

Subjects

Author keywords

PPanodeanode current collectorcomposite copper foilcopper foilcurrent collectorlithium-ion batteries

Authors and institutions

  • College of Material Science and Technology, Nanjing University of Aeronautics and Astronautics, 211006, Nanjing, Jiangsu Province People's Republic of China.

ORCID profiles: Xianli Huang, Tao Wang, Jianping He

Funding

  • Fundamental Research Funds for the Central Universities
  • National Natural Science Foundation of China
  • Priority Academic Program Development of Jiangsu Higher Education Institutions

Cite

APA

Niu, J., Huang, X., Yang, H., Li, D., Gao, X., Yang, L., Chen, Q., Sun, A., Zheng, K., Wang, T., & He, J. (2024). Copper Polypropylene Metal Plastic Composite Copper Foil: Future-Proof Anode Current Collector Solution for Lithium-Ion Batteries with High Energy Density. ACS Applied Materials & Interfaces, 16(42), 57603-57613. https://doi.org/10.1021/acsami.4c08053

Vancouver

Niu J, Huang X, Yang H, Li D, Gao X, Yang L, et al. Copper Polypropylene Metal Plastic Composite Copper Foil: Future-Proof Anode Current Collector Solution for Lithium-Ion Batteries with High Energy Density. ACS Applied Materials & Interfaces. 2024;16(42):57603-57613. doi:10.1021/acsami.4c08053

BibTeX
@article{Niu2024,
  author = {Niu, Jing and Huang, Xianli and Yang, Hui and Li, Datuan and Gao, Xingxu and Yang, Ling and Chen, Qian and Sun, Ao and Zheng, Kejun and Wang, Tao and He, Jianping},
  title = {Copper Polypropylene Metal Plastic Composite Copper Foil: Future-Proof Anode Current Collector Solution for Lithium-Ion Batteries with High Energy Density},
  journal = {ACS Applied Materials & Interfaces},
  year = {2024},
  volume = {16},
  number = {42},
  pages = {57603--57613},
  doi = {10.1021/acsami.4c08053}
}
Start for free →