Significantly Enhanced Mechanical, Thermal, and Ablative Properties of the Lightweight Carbon Fabric/Phenol-Formaldehyde Resin/Siloxane Aerogels Ternary Interpenetrating Network
ACS Applied Materials & Interfaces · 24.07.2024 · 16 (29) · 38520-38530
DOI: 10.1021/acsami.4c06783 ↗Kurz gefasst
Fachartikel in der Zeitschrift ACS Applied Materials & Interfaces, online erschienen am 09.07.2024. Verfasst von Jie Zhang und 6 weiteren Autor:innen. Beteiligte Einrichtung: Department of Engineering Mechanics, Harbin University of Science and Technology, Harbin 150080, P. R. China. Die Arbeit wurde bisher 24-mal zitiert (Crossref) und nennt 35 Literaturangaben. Gefördert von: Natural Science Foundation of Heilongjiang Province, National Natural Science Foundation of China, Fundamental Research Foundation for Universities of Heilongjiang Province.
Abstract (Originalsprache)
Lightweight ablative thermal protection materials (TPMs), which can resist long-term ablation in an oxidizing atmosphere, are urgently required for aerospace vehicles. Herein, carbon fabric/phenol-formaldehyde resin/siloxane aerogels (CF/PFA/SiA) nanocomposite with interpenetrating network multiscale structure was developed via simple and efficient sol-gel followed by atmospheric pressure drying. The ternary networks structurally interpenetrating in macro-, micron-, and the nanoscales, chemically cross-linking at the molecular scale, and silica layer generated by in situ heating synergistically bring about low density (∼0.3 g cm-3), enhanced mechanical properties, thermal stability, and oxidation resistance, and a low thermal conductivity of 81 mW m-1 K-1. More intriguingly, good thermal protection with near-zero surface recession at 1300 °C for 300 s and remarkable thermal insulation with a back-side temperature below 60 °C at 20 mm thickness. The interpenetrating network strategy can be extended to other porous components with excellent high-temperature properties, such as ZrO2 and SiC, which will facilitate the improvement of lightweight ablative TPMs. Moreover, it may open a new avenue for fabricating multifunctional binary, ternary, and even multiple interpenetrating network materials.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Department of Engineering Mechanics, Harbin University of Science and Technology, Harbin 150080, P. R. China.
- Harbin Aircraft Industry (Group) Co. Ltd, Aviation Industry Corporation of China, Harbin 150060, P. R. China.
- National Key Laboratory of Science and Technology on Advanced Composites in Special Environments, Harbin Institute of Technology, Harbin 150080, P. R. China.
ORCID-Profile: Haiming Cheng, Changqing Hong
Förderung
- Natural Science Foundation of Heilongjiang Province
- National Natural Science Foundation of China
- Fundamental Research Foundation for Universities of Heilongjiang Province
Zitieren
APA
Zhang, J., Yin, R., Fan, Z., Zhou, X., Cheng, H., Hong, C., & Zhang, X. (2024). Significantly Enhanced Mechanical, Thermal, and Ablative Properties of the Lightweight Carbon Fabric/Phenol-Formaldehyde Resin/Siloxane Aerogels Ternary Interpenetrating Network. ACS Applied Materials & Interfaces, 16(29), 38520-38530. https://doi.org/10.1021/acsami.4c06783
Vancouver
Zhang J, Yin R, Fan Z, Zhou X, Cheng H, Hong C, et al. Significantly Enhanced Mechanical, Thermal, and Ablative Properties of the Lightweight Carbon Fabric/Phenol-Formaldehyde Resin/Siloxane Aerogels Ternary Interpenetrating Network. ACS Applied Materials & Interfaces. 2024;16(29):38520-38530. doi:10.1021/acsami.4c06783
BibTeX
@article{Zhang2024,
author = {Zhang, Jie and Yin, Rongying and Fan, Zihao and Zhou, Xinwei and Cheng, Haiming and Hong, Changqing and Zhang, Xinghong},
title = {Significantly Enhanced Mechanical, Thermal, and Ablative Properties of the Lightweight Carbon Fabric/Phenol-Formaldehyde Resin/Siloxane Aerogels Ternary Interpenetrating Network},
journal = {ACS Applied Materials & Interfaces},
year = {2024},
volume = {16},
number = {29},
pages = {38520--38530},
doi = {10.1021/acsami.4c06783}
}
EUVIMED