Study of CO 2 Adsorption Properties on the SrTiO 3 (001) Surface with Ambient Pressure XPS
ACS Applied Materials & Interfaces · 2024-07-24 · 16 (29) · 38679-38689
DOI: 10.1021/acsami.4c04729 ↗At a glance
Journal article in ACS Applied Materials & Interfaces, published online on 2024-07-10. Written by Dongwoo Kim and 16 co-authors. Institution: Department of Physics and Photon Science, Gwangju Institute of Science and Technology, Gwangju 61005, Republic of Korea. Cited 19 times so far (Crossref); 65 references. Funded by: National Research Foundation of Korea, Brookhaven National Laboratory, Pohang University of Science and Technology.
Abstract (original language)
The adsorption properties of CO2 on the SrTiO3(001) surface were investigated using ambient pressure X-ray photoelectron spectroscopy under elevated pressure and temperature conditions. On the Nb-doped TiO2-enriched (1 × 1) SrTiO3 surface, CO2 adsorption, i.e., the formation of CO3 surface species, occurs first at the oxygen lattice site under 10-6 mbar CO2 at room temperature. The interaction of CO2 molecules with oxygen vacancies begins when the CO2 pressure increases to 0.25 mbar. The adsorbed CO3 species on the Nb-doped SrTiO3 surface increases continuously as the pressure increases but starts to leave the surface as the surface temperature increases, which occurs at approximately 373 K on the defect-free surface. On the undoped TiO2-enriched (1 × 1) SrTiO3 surface, CO2 adsorption also occurs first at the lattice oxygen sites. Both the doped and undoped SrTiO3 surfaces exhibit an enhancement of the CO3 species with the presence of oxygen vacancies, thus indicating the important role of oxygen vacancies in CO2 dissociation. When OH species are removed from the undoped SrTiO3 surface, the CO3 species begin to form under 10-6 mbar at 573 K, thus indicating the critical role of OH in preventing CO2 adsorption. The observed CO2 adsorption properties of the various SrTiO3 surfaces provide valuable information for designing SrTiO3-based CO2 catalysts.
Subjects
Author keywords
Authors and institutions
- Department of Physics and Photon Science, Gwangju Institute of Science and Technology, Gwangju 61005, Republic of Korea.
- National Synchrotron Light Source II, Brookhaven National Laboratory, Upton, New York 11973, United States.
- Chemistry Division, Brookhaven National Laboratory, Upton, New York 11973, United States.
- Gwangju Science Academy for the Gifted, Gwangju 61005, Republic of Korea.
- Pohang Accelerator Laboratory, POSTECH, Pohang-si, Gyeongsangbuk-do 37673, Republic of Korea.
- Center for Functional Nanomaterials, Brookhaven National Laboratory, Upton, New York 11973, United States.
ORCID profiles: Hojoon Lim, Ki-Jeong Kim, Jeongjin Kim, Adrian Hunt, Iradwikanari Waluyo, Bongjin Simon Mun
Funding
- National Research Foundation of Korea
- Brookhaven National Laboratory
- Pohang University of Science and Technology
Cite
APA
Kim, D., Lim, H., Seo, M., Shin, H., Kim, K., Jung, M., Jang, S., Chae, B., Park, B., Lee, J., Choi, Y., Kim, K. J., Kim, J., Tong, X., Hunt, A., Waluyo, I., & Mun, B. S. (2024). Study of CO 2 Adsorption Properties on the SrTiO 3 (001) Surface with Ambient Pressure XPS. ACS Applied Materials & Interfaces, 16(29), 38679-38689. https://doi.org/10.1021/acsami.4c04729
Vancouver
Kim D, Lim H, Seo M, Shin H, Kim K, Jung M, et al. Study of CO 2 Adsorption Properties on the SrTiO 3 (001) Surface with Ambient Pressure XPS. ACS Applied Materials & Interfaces. 2024;16(29):38679-38689. doi:10.1021/acsami.4c04729
BibTeX
@article{Kim2024,
author = {Kim, Dongwoo and Lim, Hojoon and Seo, Minsik and Shin, Hyunsuk and Kim, Kyungmin and Jung, Moonjung and Jang, Subin and Chae, Byunghyun and Park, Buseung and Lee, Jungwoo and Choi, Yongseok and Kim, Ki-Jeong and Kim, Jeongjin and Tong, Xiao and Hunt, Adrian and Waluyo, Iradwikanari and Mun, Bongjin Simon},
title = {Study of CO 2 Adsorption Properties on the SrTiO 3 (001) Surface with Ambient Pressure XPS},
journal = {ACS Applied Materials & Interfaces},
year = {2024},
volume = {16},
number = {29},
pages = {38679--38689},
doi = {10.1021/acsami.4c04729}
}
EUVIMED