Highly Adaptive Kirigami-Metastructure Adhesive with Vertically Self-Aligning Octopus-like 3D Suction Cups for Efficient Wet Adhesion to Complexly Curved Surfaces
ACS Applied Materials & Interfaces · 2024-07-17 · 16 (28) · 37147-37156
DOI: 10.1021/acsami.4c03363 ↗At a glance
Journal article in ACS Applied Materials & Interfaces, published online on 2024-07-01. Written by Jihyun Lee and 5 co-authors. Institution: School of Chemical Engineering, Sungkyunkwan University (SKKU), 2066 Seobu-ro, Jangan-gu, Suwon 16419, Republic of Korea. Major MEDLINE topics: Adhesives, Octopodiformes. Cited 18 times so far (Crossref); 37 references. Funded by: National Research Council of Science and Technology, National Research Foundation of Korea, Ministry of Trade, Industry and Energy.
Abstract (original language)
An essential requirement for biomedical devices is the capability of conformal adaptability on diverse irregular 3D (three-dimensional) nonflat surfaces in the human body that may be covered with liquids such as mucus or sweat. However, the development of reversible adhesive interface materials for biodevices that function on complex biological surfaces is challenging due to the wet, slippery, smooth, and curved surface properties. Herein, we present an ultra-adaptive bioadhesive for irregular 3D oral cavities covered with saliva by integrating a kirigami-metastructure and vertically self-aligning suction cups. The flared suction cup, inspired by octopus tentacles, allows adhesion to moist surfaces. Additionally, the kirigami-based auxetic metastructure with a negative Poisson's ratio relieves the stress caused by tensile strain, thereby mitigating the stress caused by curved surfaces and enabling conformal contact with the surface. As a result, the adhesive strength of the proposed auxetic adhesive is twice that of adhesives with a flat backbone on highly curved porcine palates. For potential application, the proposed auxetic adhesive is mounted on a denture and performs successfully in human subject feasibility evaluations. An integrated design of these two structures may provide functionality and potential for biomedical applications.
Subjects
MeSH terms (MEDLINE)
Author keywords
Substances
Authors and institutions
- School of Chemical Engineering, Sungkyunkwan University (SKKU), 2066 Seobu-ro, Jangan-gu, Suwon 16419, Republic of Korea.
- Department of Internal Medicine, Korea University College of Medicine, 73 Goryeodae-ro, Seongbuk-gu, Seoul 02841, Republic of Korea.
- Samsung Advanced Institute for Health Science & Technology (SAIHST), Sungkyunkwan University (SKKU), 2066 Seobu-ro, Jangan-gu, Suwon 16419, Republic of Korea.
ORCID profiles: Changhyun Pang
Funding
- National Research Council of Science and Technology
- National Research Foundation of Korea
- Ministry of Trade, Industry and Energy
Cite
APA
Lee, J., Park, H. K., Hwang, G. W., Kang, G. R., Choi, Y. S., & Pang, C. (2024). Highly Adaptive Kirigami-Metastructure Adhesive with Vertically Self-Aligning Octopus-like 3D Suction Cups for Efficient Wet Adhesion to Complexly Curved Surfaces. ACS Applied Materials & Interfaces, 16(28), 37147-37156. https://doi.org/10.1021/acsami.4c03363
Vancouver
Lee J, Park HK, Hwang GW, Kang GR, Choi YS, Pang C. Highly Adaptive Kirigami-Metastructure Adhesive with Vertically Self-Aligning Octopus-like 3D Suction Cups for Efficient Wet Adhesion to Complexly Curved Surfaces. ACS Applied Materials & Interfaces. 2024;16(28):37147-37156. doi:10.1021/acsami.4c03363
BibTeX
@article{Lee2024,
author = {Lee, Jihyun and Park, Hyoung-Ki and Hwang, Gui Won and Kang, Gyun Ro and Choi, Yoon Seok and Pang, Changhyun},
title = {Highly Adaptive Kirigami-Metastructure Adhesive with Vertically Self-Aligning Octopus-like 3D Suction Cups for Efficient Wet Adhesion to Complexly Curved Surfaces},
journal = {ACS Applied Materials & Interfaces},
year = {2024},
volume = {16},
number = {28},
pages = {37147--37156},
doi = {10.1021/acsami.4c03363}
}
EUVIMED