EUVIMEDOpdag EUVIMED
Crossref

Ultrafast Sintered Composite Cathode Incorporating a Negative Thermal Expansion Material for High-Performance Protonic Ceramic Fuel Cells

Abdullah Tahir iD, Alessio Belotti, Yufei Song, Yuhao Wang, Adeleke Maradesa, Jingwei Li, Yunfeng Tian, Francesco Ciucci

ACS Applied Materials & Interfaces · 2024-08-28 · 16 (34) · 44645-44654

DOI: 10.1021/acsami.4c03312 ↗

At a glance

Journal article in ACS Applied Materials & Interfaces, published online on 2024-08-16. Written by Abdullah Tahir and 7 co-authors. Institution: Department of Mechanical and Aerospace Engineering, The Hong Kong University of Science and Technology, Hong Kong 999077, China. Cited 11 times so far (Crossref); 47 references. Funded by: Research Grants Council, University Grants Committee, Universit?t Bayreuth.

AbstractSubjectsBibliografiske oplysningerCiteRelated studies

Abstract (original language)

Protonic ceramic fuel cells (PCFCs) offer a promising, clean, and efficient energy conversion solution. However, thermal mismatch between cathodes and electrolytes remains a critical obstacle, leading to interfacial damage such as cracking and delamination. Incorporating negative thermal expansion (NTE) materials into the cathode can mitigate this issue. The challenge lies in integrating NTE materials without compromising electrochemical performance or causing unwanted reactions during sintering. This study introduces a novel BaFe0.9Zr0.1O3-δ (BFZ)-NdMnO3-δ composite cathode fabricated using an ultrafast high-temperature sintering (UHS) process. This approach mitigates thermal expansion while boosting the cathode's catalytic activity compared to a single-phase BFZ cathode. The resulting fuel cell achieves a high peak power density of ∼550 mW cm-2 at 600 °C and demonstrates excellent stability during a 100 h test at 550 °C. These findings highlight the potential of UHS for developing high-performance, thermally compatible cathode materials that advance the field of PCFCs.

Subjects

Author keywords

composite cathodenegative thermal expansionprotonic ceramic fuel cellrapid sinteringthermal compatibility

Authors and institutions

  • Department of Mechanical and Aerospace Engineering, The Hong Kong University of Science and Technology, Hong Kong 999077, China.
  • Chair of Electrode Design for Electrochemical Energy Systems, University of Bayreuth, Bayreuth 95448, Germany.
  • School of Materials Science and Physics, China University of Mining and Technology, Xuzhou 221116, China.

ORCID profiles: Abdullah Tahir

Funding

  • Research Grants Council, University Grants Committee
  • Universit?t Bayreuth

Cite

APA

Tahir, A., Belotti, A., Song, Y., Wang, Y., Maradesa, A., Li, J., Tian, Y., & Ciucci, F. (2024). Ultrafast Sintered Composite Cathode Incorporating a Negative Thermal Expansion Material for High-Performance Protonic Ceramic Fuel Cells. ACS Applied Materials & Interfaces, 16(34), 44645-44654. https://doi.org/10.1021/acsami.4c03312

Vancouver

Tahir A, Belotti A, Song Y, Wang Y, Maradesa A, Li J, et al. Ultrafast Sintered Composite Cathode Incorporating a Negative Thermal Expansion Material for High-Performance Protonic Ceramic Fuel Cells. ACS Applied Materials & Interfaces. 2024;16(34):44645-44654. doi:10.1021/acsami.4c03312

BibTeX
@article{Tahir2024,
  author = {Tahir, Abdullah and Belotti, Alessio and Song, Yufei and Wang, Yuhao and Maradesa, Adeleke and Li, Jingwei and Tian, Yunfeng and Ciucci, Francesco},
  title = {Ultrafast Sintered Composite Cathode Incorporating a Negative Thermal Expansion Material for High-Performance Protonic Ceramic Fuel Cells},
  journal = {ACS Applied Materials & Interfaces},
  year = {2024},
  volume = {16},
  number = {34},
  pages = {44645--44654},
  doi = {10.1021/acsami.4c03312}
}
Start for free →