EUVIMEDEUVIMED entdecken
Crossref

Scalable and Highly Porous Membrane Adsorbents for Direct Air Capture of CO 2

Thien Tran, Shweta Singh, Shiwang Cheng iD, Haiqing Lin iD

ACS Applied Materials & Interfaces · 01.05.2024 · 16 (17) · 22715-22723

DOI: 10.1021/acsami.4c02873 ↗

Kurz gefasst

Fachartikel in der Zeitschrift ACS Applied Materials & Interfaces, online erschienen am 16.04.2024. Verfasst von Thien Tran und 3 weiteren Autor:innen. Beteiligte Einrichtung: Department of Chemical and Biological Engineering, University at Buffalo, The State University of New York, Buffalo, New York 14260, United States. Die Arbeit wurde bisher 22-mal zitiert (Crossref) und nennt 41 Literaturangaben. Gefördert von: U.S. Department of Energy, National Science Foundation.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Direct air capture (DAC) of CO2 is a carbon-negative technology to mitigate carbon emissions, and it requires low-cost sorbents with high CO2 sorption capacity that can be easily manufactured on a large scale. In this work, we develop highly porous membrane adsorbents comprising branched polyethylenimine (PEI) impregnated in low-cost, porous Solupor supports. The effect of the PEI molecular mass and loading on the physical properties of the adsorbents is evaluated, including porosity, degradation temperature, glass transition temperature, and CO2 permeance. CO2 capture from simulated air containing 400 ppm of CO2 in these sorbents is thoroughly investigated as a function of temperature and relative humidity (RH). Polymer dynamics was examined using differential scanning calorimetry (DSC) and broadband dielectric spectroscopy (BDS), showing that CO2 sorption is limited by its diffusion in these PEI-based sorbents. A membrane adsorbent containing 48 mass% PEI (800 Da) with a porosity of 72% exhibits a CO2 sorption capacity of 1.2 mmol/g at 25 °C and RH of 30%, comparable to the state-of-the-art adsorbents. Multicycles of sorption and desorption were performed to determine their regenerability, stability, and potential for practical applications.

Schlagwörter

Stichwörter der Autor:innen

CO2 sorptiondirect air capturemembrane adsorbentpolyethylenimineporous support

Autor:innen und Institutionen

  • Department of Chemical and Biological Engineering, University at Buffalo, The State University of New York, Buffalo, New York 14260, United States.
  • U.S. Department of Energy, National Energy Technology Laboratory, Pittsburgh, Pennsylvania 15236, United States.
  • NETL Support Contractor, Pittsburgh, Pennsylvania 15236, United States.
  • Department of Chemical Engineering and Materials Science, Michigan State University, East Lansing, Michigan 48824, United States.

ORCID-Profile: Shiwang Cheng, Haiqing Lin

Förderung

  • U.S. Department of Energy
  • National Science Foundation

Zitieren

APA

Tran, T., Singh, S., Cheng, S., & Lin, H. (2024). Scalable and Highly Porous Membrane Adsorbents for Direct Air Capture of CO 2. ACS Applied Materials & Interfaces, 16(17), 22715-22723. https://doi.org/10.1021/acsami.4c02873

Vancouver

Tran T, Singh S, Cheng S, Lin H. Scalable and Highly Porous Membrane Adsorbents for Direct Air Capture of CO 2. ACS Applied Materials & Interfaces. 2024;16(17):22715-22723. doi:10.1021/acsami.4c02873

BibTeX
@article{Tran2024,
  author = {Tran, Thien and Singh, Shweta and Cheng, Shiwang and Lin, Haiqing},
  title = {Scalable and Highly Porous Membrane Adsorbents for Direct Air Capture of CO 2},
  journal = {ACS Applied Materials & Interfaces},
  year = {2024},
  volume = {16},
  number = {17},
  pages = {22715--22723},
  doi = {10.1021/acsami.4c02873}
}
Kostenlos starten →