3D Printed Eggshell Microparticle-Laden Thermoplastic Scaffolds for Bone Tissue Engineering
ACS Applied Materials & Interfaces · 03.07.2024 · 16 (26) · 32957-32970
DOI: 10.1021/acsami.4c02800 ↗Kurz gefasst
Fachartikel in der Zeitschrift ACS Applied Materials & Interfaces, online erschienen am 17.06.2024. Verfasst von Mert Gezek und 3 weiteren Autor:innen. Beteiligte Einrichtung: Department of Chemical Engineering, University of Massachusetts, Lowell, Massachusetts 01854, United States. Hauptthemen laut MEDLINE: Tissue Engineering, Tissue Scaffolds, Printing, Three-Dimensional, Egg Shell. Die Arbeit wurde bisher 17-mal zitiert (Crossref) und nennt 87 Literaturangaben. Gefördert von: University of Massachusetts Lowell.
Abstract (Originalsprache)
Three-dimensional (3D) printing, an additive manufacturing technique, is increasingly used in the field of tissue engineering. The ability to create complex structures with high precision makes the 3D printing of this material a preferred method for constructing personalized and functional materials. However, the challenge lies in developing affordable and accessible materials with the desired physiochemical and biological properties. In this study, we used eggshell microparticles (ESPs), an example of bioceramic and unconventional biomaterials, to reinforce thermoplastic poly(ε-caprolactone) (PCL) scaffolds via extrusion-based 3D printing. The goal was to conceive a sustainable, affordable, and unique personalized medicine approach. The scaffolds were fabricated with varying concentrations of eggshells, ranging from 0 to 50% (w/w) in the PCL scaffolds. To assess the physicochemical properties, we employed scanning electron microscopy, Fourier-transform infrared spectroscopy, thermogravimetric analysis, differential scanning calorimetry, and X-ray diffraction analysis. Mechanical properties were evaluated through compression testing, and degradation kinetics were studied through accelerated degradation with the remaining mass ranging between 89.4 and 28.3%. In vitro, we evaluated the characteristics of the scaffolds using the MC3T3-E1 preosteoblasts over a 14 day period. In vitro characterization involved the use of the Alamar blue assay, confocal imaging, and real-time quantitative polymerase chain reaction. The results of this study demonstrate the potential of 3D printed biocomposite scaffolds, consisting of thermoplastic PCL reinforced with ESPs, as a promising alternative for bone-graft applications.
Schlagwörter
MeSH-Schlagwörter (MEDLINE)
Stichwörter der Autor:innen
Substanzen
Autor:innen und Institutionen
- Department of Chemical Engineering, University of Massachusetts, Lowell, Massachusetts 01854, United States.
- Biomedical Engineering and Biotechnology Graduate Program, University of Massachusetts, Lowell, Massachusetts 01854, United States.
- Department of Surgery, University of Massachusetts Medical School, Worcester, Massachusetts 01605, United States.
ORCID-Profile: Maria Eduarda Torres Gouveia, Gulden Camci-Unal
Förderung
- University of Massachusetts Lowell
Zitieren
APA
Gezek, M., Altunbek, M., Torres Gouveia, M. E., & Camci-Unal, G. (2024). 3D Printed Eggshell Microparticle-Laden Thermoplastic Scaffolds for Bone Tissue Engineering. ACS Applied Materials & Interfaces, 16(26), 32957-32970. https://doi.org/10.1021/acsami.4c02800
Vancouver
Gezek M, Altunbek M, Torres Gouveia ME, Camci-Unal G. 3D Printed Eggshell Microparticle-Laden Thermoplastic Scaffolds for Bone Tissue Engineering. ACS Applied Materials & Interfaces. 2024;16(26):32957-32970. doi:10.1021/acsami.4c02800
BibTeX
@article{Gezek2024,
author = {Gezek, Mert and Altunbek, Mine and Torres Gouveia, Maria Eduarda and Camci-Unal, Gulden},
title = {3D Printed Eggshell Microparticle-Laden Thermoplastic Scaffolds for Bone Tissue Engineering},
journal = {ACS Applied Materials & Interfaces},
year = {2024},
volume = {16},
number = {26},
pages = {32957--32970},
doi = {10.1021/acsami.4c02800}
}
EUVIMED