Adhesion Strength of an Active Material Layer/Cu Foil Interface in Silicon-Based Anodes
ACS Applied Materials & Interfaces · 10.04.2024 · 16 (14) · 17692-17700
DOI: 10.1021/acsami.4c02232 ↗Kurz gefasst
Fachartikel in der Zeitschrift ACS Applied Materials & Interfaces, online erschienen am 02.04.2024. Verfasst von Kazuma Ogata und 6 weiteren Autor:innen. Beteiligte Einrichtung: Department of Precision Mechanics, Faculty of Science and Engineering, Chuo University, Tokyo 1128551, Japan. Die Arbeit wurde bisher 17-mal zitiert (Crossref) und nennt 46 Literaturangaben. Gefördert von: University of Delaware, Japan Society for the Promotion of Science.
Abstract (Originalsprache)
Lithium-ion batteries (LIB) stand as ubiquitous power sources in the industrial sector, with a mounting emphasis on their sustainability considerations, where safety, durability, and recyclability are all considered. Within the intricate architecture of LIB, the anode sheet processes a stratified composition comprising an active material layer and a copper foil serving as the current collector. The delamination of the active materials from the current collector is one of the major mechanical failure exhibitions for battery short circuits and deteriorated electrochemical performance. On the contrary, the interfacial strength between the active materials and the current collector also determines the battery manufacturing quality and battery recycling success. To cope with this emerging challenge, we designed quantifiable laser shock-wave adhesion tests to characterize the adhesion strength and delamination behaviors between pure Si-based active materials and the current collector. A physics-based computational model is also established to quantify the adhesion strength further. We discovered that the C-Si sheet is easier for delamination as layer buckling due to the more severe stress concentration around the particles due to the heterogeneity of the carbon and silicon particles. Results highlight the promise to evaluate the delamination behaviors of the current materials via an innovative methodology and provide powerful tools for next-generation sustainable battery design.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Department of Precision Mechanics, Faculty of Science and Engineering, Chuo University, Tokyo 1128551, Japan.
- Department of Mechanical Engineering, University of Delaware, Newark, Delaware 19716, United States.
- Energy Sustainability and Mechanics Laboratory (ESMLab), University of Delaware, Newark, Delaware 19716, United States.
ORCID-Profile: Jun Xu
Förderung
- University of Delaware
- Japan Society for the Promotion of Science
Zitieren
APA
Ogata, K., Kasuya, Y., Gao, X., Shibayama, Y., Takagi, A., Yonezu, A., & Xu, J. (2024). Adhesion Strength of an Active Material Layer/Cu Foil Interface in Silicon-Based Anodes. ACS Applied Materials & Interfaces, 16(14), 17692-17700. https://doi.org/10.1021/acsami.4c02232
Vancouver
Ogata K, Kasuya Y, Gao X, Shibayama Y, Takagi A, Yonezu A, et al. Adhesion Strength of an Active Material Layer/Cu Foil Interface in Silicon-Based Anodes. ACS Applied Materials & Interfaces. 2024;16(14):17692-17700. doi:10.1021/acsami.4c02232
BibTeX
@article{Ogata2024,
author = {Ogata, Kazuma and Kasuya, Yuto and Gao, Xiang and Shibayama, Yuto and Takagi, Aoi and Yonezu, Akio and Xu, Jun},
title = {Adhesion Strength of an Active Material Layer/Cu Foil Interface in Silicon-Based Anodes},
journal = {ACS Applied Materials & Interfaces},
year = {2024},
volume = {16},
number = {14},
pages = {17692--17700},
doi = {10.1021/acsami.4c02232}
}
EUVIMED