Chirality-Induced Crystallization and Defect Passivation of Perovskites: Toward High-Performance Solar Cells
ACS Applied Materials & Interfaces · 03.04.2024 · 16 (13) · 16340-16350
DOI: 10.1021/acsami.4c01246 ↗Kurz gefasst
Fachartikel in der Zeitschrift ACS Applied Materials & Interfaces, online erschienen am 21.03.2024. Verfasst von Wenting Wu und 9 weiteren Autor:innen. Beteiligte Einrichtung: College of Chemistry, Chemical Engineering and Materials Science, Soochow University, Suzhou 215123, P. R. China. Die Arbeit wurde bisher 19-mal zitiert (Crossref) und nennt 61 Literaturangaben. Gefördert von: Collaborative Innovation Center of Suzhou Nano Science and Technology, Soochow University, National Natural Science Foundation of China.
Abstract (Originalsprache)
As an additive for perovskites, in addition to functional groups, the steric configuration of molecules is worthy of consideration because it influences perovskite crystallization, thus determining whether defect passivation is effective without any side effects. In this work, the chiral molecules l- and d-pyroglutamic acid (l-PA and d-PA) were chosen as additives for perovskite passivators to reveal the reasons for the differences in passivation between amino acids with different steric configurations. Functional groups, such as the C═O groups and N-H groups of l-PA and d-PA, can passivate the perovskite defects. However, l-PA exhibited a more distorted steric configuration, while d-PA was more planar, leading to differences in the distances between the two C═O groups. Taking the Pb-Pb bond length as a reference, the shorter distance between the two C═O groups of l-PA distorts the perovskite lattice structure, which results in poor device stability. Conversely, the similar distance between the two C═O groups of d-PA promoted the preferred orientational growth of the perovskite. Finally, the d-PA-doped device accomplished an excellent efficiency of 24.11% with an improved open-circuit voltage of 1.17 V. Furthermore, the efficiency of the unencapsulated d-PA-doped device was maintained at 93% in N2 for more than 3000 h and 74% after 500 h of operation at maximum power point tracking under continuous illumination.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- College of Chemistry, Chemical Engineering and Materials Science, Soochow University, Suzhou 215123, P. R. China.
- Laboratory of Advanced Optoelectronic Materials, Suzhou Key Laboratory of Novel Semiconductor-Optoelectronics Materials and Devices, Soochow University, Suzhou 215123, P. R. China.
- School of Material Science & Engineering, National Experimental Demonstration Center for Materials Science and Engineering, Jiangsu Province Cultivation Base for State Key Laboratory of Photovoltaic Science and Technolo…
ORCID-Profile: Zelong Zhang, Jing Zhang, Bo Song
Förderung
- Collaborative Innovation Center of Suzhou Nano Science and Technology
- Soochow University
- National Natural Science Foundation of China
- State and Local Joint Engineering Laboratory for Novel Functional Polymeric Materials, Soochow University
- Priority Academic Program Development of Jiangsu Higher Education Institutions
Zitieren
APA
Wu, W., Chen, Q., Cao, J., Fu, J., Zhang, Z., Chen, L., Rui, D., Zhang, J., Zhou, Y., & Song, B. (2024). Chirality-Induced Crystallization and Defect Passivation of Perovskites: Toward High-Performance Solar Cells. ACS Applied Materials & Interfaces, 16(13), 16340-16350. https://doi.org/10.1021/acsami.4c01246
Vancouver
Wu W, Chen Q, Cao J, Fu J, Zhang Z, Chen L, et al. Chirality-Induced Crystallization and Defect Passivation of Perovskites: Toward High-Performance Solar Cells. ACS Applied Materials & Interfaces. 2024;16(13):16340-16350. doi:10.1021/acsami.4c01246
BibTeX
@article{Wu2024,
author = {Wu, Wenting and Chen, Qiaoyun and Cao, Ji and Fu, Jianfei and Zhang, Zelong and Chen, Lei and Rui, Dong and Zhang, Jing and Zhou, Yi and Song, Bo},
title = {Chirality-Induced Crystallization and Defect Passivation of Perovskites: Toward High-Performance Solar Cells},
journal = {ACS Applied Materials & Interfaces},
year = {2024},
volume = {16},
number = {13},
pages = {16340--16350},
doi = {10.1021/acsami.4c01246}
}
EUVIMED