Improvement of Mechanical and Thermoelectric Properties of AgCuTe by Pinning Effect and Enhanced Liquid-Like Behavior via SiC Alloying
ACS Applied Materials & Interfaces · 2024-04-03 · 16 (13) · 16290-16299
DOI: 10.1021/acsami.4c01019 ↗At a glance
Journal article in ACS Applied Materials & Interfaces, published online on 2024-03-23. Written by Lanwei Li and 6 co-authors. Institution: Institute for Computational Materials Science, School of Physics and Electronics, Henan University, Kaifeng 475004, P. R. China. Cited 15 times so far (Crossref); 62 references. Funded by: National Natural Science Foundation of China.
Abstract (original language)
With the development and application of thermoelectric (TE) devices, it requires not only high-performance of TE materials but also high mechanical properties. Here, we report a medium-temperature liquid material, AgCuTe, with high mechanical properties. The results demonstrate that AgCuTe possesses a multiphase structure characterized by abundant grain boundaries, resulting in reduced lattice thermal conductivity and inherently high mechanical strength. Furthermore, nano-SiC was alloyed into the AgCuTe material to further improve its mechanical and TE properties. Nano-SiC exhibited a button-like distribution within the grain boundaries, introducing a pinning effect that significantly elevated the Vickers hardness of the samples. Additionally, nano-SiC induced strong lattice distortion energy in the vicinity, which promotes Ag/Cu ions to escape from the lattice and enhances the liquid-like behavior of Ag/Cu ions. Finally, these enhancements led to a 21% improvement in the mechanical properties and a 40% improvement in the TE properties for AgCuTe. Notably, AgCuTe achieved its peak TE performance, with a latest peak ZT value of 1.32 at 723 K. This research expands the potential applications of AgCuTe.
Subjects
Author keywords
Authors and institutions
- Institute for Computational Materials Science, School of Physics and Electronics, Henan University, Kaifeng 475004, P. R. China.
- Department of Mechanical and Automotive Engineering, South China University of Technology, Guangzhou 510641, China.
- School of Mechanical and Electrical Engineering, Chuzhou University, Chuzhou 239000, China.
ORCID profiles: Chao Wang
Funding
- National Natural Science Foundation of China
Cite
APA
Li, L., Zhai, W., Wang, C., Li, S., Peng, P., Fan, P., & Yang, G. (2024). Improvement of Mechanical and Thermoelectric Properties of AgCuTe by Pinning Effect and Enhanced Liquid-Like Behavior via SiC Alloying. ACS Applied Materials & Interfaces, 16(13), 16290-16299. https://doi.org/10.1021/acsami.4c01019
Vancouver
Li L, Zhai W, Wang C, Li S, Peng P, Fan P, et al. Improvement of Mechanical and Thermoelectric Properties of AgCuTe by Pinning Effect and Enhanced Liquid-Like Behavior via SiC Alloying. ACS Applied Materials & Interfaces. 2024;16(13):16290-16299. doi:10.1021/acsami.4c01019
BibTeX
@article{Li2024,
author = {Li, Lanwei and Zhai, Wenya and Wang, Chao and Li, Shuyao and Peng, Panpan and Fan, Pengya and Yang, Gui},
title = {Improvement of Mechanical and Thermoelectric Properties of AgCuTe by Pinning Effect and Enhanced Liquid-Like Behavior via SiC Alloying},
journal = {ACS Applied Materials & Interfaces},
year = {2024},
volume = {16},
number = {13},
pages = {16290--16299},
doi = {10.1021/acsami.4c01019}
}
EUVIMED