EUVIMEDOpdag EUVIMED
Crossref

High-Performance W-Doped Bi 0.5 Sb 1.5 Te 3 Flexible Thermoelectric Films and Generators

Zerui Liu, Yulin Zhang, Feng-Ning Xue, Ting Liu, Xiaokang Ding iD, Yong Lu iD, Ji-Cai Zhang iD, Fu-Jian Xu iD

ACS Applied Materials & Interfaces · 2024-05-22 · 16 (20) · 26025-26033

DOI: 10.1021/acsami.4c00529 ↗

At a glance

Journal article in ACS Applied Materials & Interfaces, published online on 2024-05-08. Written by Zerui Liu and 7 co-authors. Institution: State Key Laboratory of Chemical Resource Engineering, Laboratory of Biomedical Materials and Key Lab of Biomedical Materials of Natural Macromolecul…. Cited 18 times so far (Crossref); 56 references. Funded by: Beijing Outstanding Young Talents, Major Scientific and Technological Innovation Project of Shandong Province, National Natural Science Foundation of China.

AbstractSubjectsBibliografiske oplysningerCiteRelated studies

Abstract (original language)

Bi-Sb-Te-based thermoelectric materials have the best room-temperature thermoelectric properties, but their inherent brittleness and rigidity limit their application in the wearable field. In this study, W-doped p-type Bi0.5Sb1.5Te3 (W-BST) thin films were prepared using magnetron sputtering on polyimide substrates to create thermoelectric generators (TEGs). Bending tests showed that the thin film has excellent flexibility and mechanical durability, meeting the flexible requirements of wearable devices. W doping can significantly increase the carrier concentration, Seebeck coefficient, and electrical conductivity of BST thin films. At 300 K, the power factor of the W-BST film is 2.25 times higher than that of the undoped film, reaching 13.75 μW cm-1 K-2. First-principles calculations showed that W doping introduces significant impurity peaks in the bandgap, in which W d electrons remarkably hybridize with the Sb and Te p electrons, leading to an improved electrical conductivity of BST films. Furthermore, W doping significantly reduces the work function of BST films, thereby improving the carrier mobility. A TEG module fabricated from four layers of W-BST thin films achieved a maximum output power density of 6.91 mW cm-2 at a temperature difference of 60 K. Application tests showed that the flexible TEG module could power a portable clock using the temperature difference between body temperature and room temperature. At a medium temperature of 439 K, the assembled TEG module can provide a stable output voltage of 1.51 V to power a LED. This study demonstrates the feasibility of combining inorganic thermoelectric materials with flexible substrates to create high-performance flexible TEGs.

Subjects

Author keywords

first-principles calculationsmagnetron sputteringthermoelectric materialswearable thermoelectric generatorswork function

Authors and institutions

  • State Key Laboratory of Chemical Resource Engineering, Laboratory of Biomedical Materials and Key Lab of Biomedical Materials of Natural Macromolecules (Ministry of Education), Beijing University of Chemical Technology,…
  • College of Mathematics and Physics, Beijing University of Chemical Technology, Beijing 100029, China.

ORCID profiles: Xiaokang Ding, Yong Lu, Ji-Cai Zhang, Fu-Jian Xu

Funding

  • Beijing Outstanding Young Talents
  • Major Scientific and Technological Innovation Project of Shandong Province
  • National Natural Science Foundation of China
  • Key-area research and development program of Guangdong Province

Cite

APA

Liu, Z., Zhang, Y., Xue, F. N., Liu, T., Ding, X., Lu, Y., Zhang, J. C., & Xu, F. J. (2024). High-Performance W-Doped Bi 0.5 Sb 1.5 Te 3 Flexible Thermoelectric Films and Generators. ACS Applied Materials & Interfaces, 16(20), 26025-26033. https://doi.org/10.1021/acsami.4c00529

Vancouver

Liu Z, Zhang Y, Xue FN, Liu T, Ding X, Lu Y, et al. High-Performance W-Doped Bi 0.5 Sb 1.5 Te 3 Flexible Thermoelectric Films and Generators. ACS Applied Materials & Interfaces. 2024;16(20):26025-26033. doi:10.1021/acsami.4c00529

BibTeX
@article{Liu2024,
  author = {Liu, Zerui and Zhang, Yulin and Xue, Feng-Ning and Liu, Ting and Ding, Xiaokang and Lu, Yong and Zhang, Ji-Cai and Xu, Fu-Jian},
  title = {High-Performance W-Doped Bi 0.5 Sb 1.5 Te 3 Flexible Thermoelectric Films and Generators},
  journal = {ACS Applied Materials & Interfaces},
  year = {2024},
  volume = {16},
  number = {20},
  pages = {26025--26033},
  doi = {10.1021/acsami.4c00529}
}
Start for free →