EUVIMEDOpdag EUVIMED
Crossref

The Formation Process and Mechanism of the 3D Porous Network on the Sulfonated PEEK Surface

Ming Xie iD, Gui-Yong Xiao, Zhi-Gang Song iD, Yu-Peng Lu

ACS Applied Materials & Interfaces · 2024-03-20 · 16 (11) · 13585-13596

DOI: 10.1021/acsami.4c00055 ↗

At a glance

Journal article in ACS Applied Materials & Interfaces, published online on 2024-03-06. Written by Ming Xie and 3 co-authors. Institution: Key Laboratory for Liquid-Solid Structural Evolution and Processing of Materials, Ministry of Education, Shandong University, Jinan 250061, China. Cited 17 times so far (Crossref); 46 references. Funded by: Department of Science and Technology of Shandong Province.

AbstractSubjectsBibliografiske oplysningerCiteRelated studies

Abstract (original language)

A three-dimensional (3D) porous network can be prepared on the PEEK surface by sulfonation with enhanced osseointegration and antibacterial properties. However, few studies have been conducted on the formation mechanism of a 3D porous network. In this work, the surface and cross-sectional morphologies, chemical compositions, functional groups, surface wettability, and crystalline states of sulfonated PEEK were investigated at different sulfonation times and coagulant concentrations. The results show that the number of nodular structures and broken fibers on the sulfonated PEEK surface as well as the size of macrovoids in the cross sections increase with increasing sulfonation times when water is used as a coagulant. In contrast, dilute sulfuric acid as a coagulant can inhibit the formation of surface porous structures and macrovoids in the cross sections. Moreover, all of the sulfonated PEEK samples have the same chemical compositions but exhibit better hydrophilicity as the number of microsized pores decreases. It is proposed that non-solvent-induced phase separation (NIPS) occurs during the sulfonation process, and the formation mechanism of surface and cross-sectional morphologies is discussed. Furthermore, it is assumed that the air is trapped in the microsized pores, leaving the surface of the 3D porous network in the Cassie-wetting state. All of these preliminary results throw light on the nature of the sulfonation process and may guide further modification of the structures of sulfonated PEEK.

Subjects

Author keywords

Cassie modelPEEKformation mechanismnon-solvent-induced phase separationsulfonation

Authors and institutions

  • Key Laboratory for Liquid-Solid Structural Evolution and Processing of Materials, Ministry of Education, Shandong University, Jinan 250061, China.
  • School of Materials Science and Engineering, Shandong University, Jinan 250061, China.

ORCID profiles: Ming Xie, Zhi-Gang Song

Funding

  • Department of Science and Technology of Shandong Province

Cite

APA

Xie, M., Xiao, G. Y., Song, Z. G., & Lu, Y. P. (2024). The Formation Process and Mechanism of the 3D Porous Network on the Sulfonated PEEK Surface. ACS Applied Materials & Interfaces, 16(11), 13585-13596. https://doi.org/10.1021/acsami.4c00055

Vancouver

Xie M, Xiao GY, Song ZG, Lu YP. The Formation Process and Mechanism of the 3D Porous Network on the Sulfonated PEEK Surface. ACS Applied Materials & Interfaces. 2024;16(11):13585-13596. doi:10.1021/acsami.4c00055

BibTeX
@article{Xie2024,
  author = {Xie, Ming and Xiao, Gui-Yong and Song, Zhi-Gang and Lu, Yu-Peng},
  title = {The Formation Process and Mechanism of the 3D Porous Network on the Sulfonated PEEK Surface},
  journal = {ACS Applied Materials & Interfaces},
  year = {2024},
  volume = {16},
  number = {11},
  pages = {13585--13596},
  doi = {10.1021/acsami.4c00055}
}
Start for free →