EUVIMEDOpdag EUVIMED
Crossref

Enhanced Mechanical and Electromechanical Properties of Compositionally Complex Zirconia Zr 1– x (Gd 1/5 Pr 1/5 Nd 1/5 Sm 1/5 Y 1/5 ) x O 2−δ Ceramics

Ahsanul Kabir iD, Bartlomiej Lemieszek, Maxim Varenik, Victor Buratto Tinti, Sebastian Molin iD, Igor Lubomirsky iD, Vincenzo Esposito iD, Frank Kern

ACS Applied Materials & Interfaces · 2024-03-13 · 16 (10) · 12765-12772

DOI: 10.1021/acsami.3c17501 ↗

At a glance

Journal article in ACS Applied Materials & Interfaces, published online on 2024-03-01. Written by Ahsanul Kabir and 7 co-authors. Institution: Institute for Manufacturing Technology of Ceramic Components and Composites, University of Stuttgart, Stuttgart 70569, Germany. Cited 7 times so far (Crossref); 65 references. Funded by: Bundesministerium f?r Bildung und Forschung, Deutscher Akademischer Austauschdienst, European Commission.

AbstractSubjectsBibliografiske oplysningerCiteRelated studies

Abstract (original language)

Compositionally complex oxides (CCOs) or high-entropy oxides (HEOs) are new multielement oxides with unexplored physical and functional properties. In this work, we report fluorite structure-derived compositionally complex zirconia with composition Zr1-x(Gd1/5Pr1/5Nd1/5Sm1/5Y1/5)xO2-δ (x = 0.1 and 0.2) synthesized in solid-state reaction route and sintered via hot pressing at 1350 °C. We explore the evolution of these oxides' structural, microstructural, mechanical, electrical, and electromechanical properties regarding phase separation and sintering mechanisms. Highly dense ceramics are achieved by bimodal mass diffusion, composing nanometric tetragonal and micrometric cubic grains microstructure. The material exhibits an anomalously large electrostriction response exceeding the M33 value of 10-17 m2/V2 at room temperature and viscoelastic properties of primary creep in nanoindentation measurement under fast loading. These findings are strikingly similar to those reported for doped ceria and bismuth oxide derivates, highlighting the presence of a large concentration of point defects linked to structural distortion and anelastic behavior, which are characteristics of nonclassical ionic electrostrictors.

Subjects

Author keywords

electrostrictionhigh entropy oxidesionic conductivitymicrostructurezirconia

Authors and institutions

  • Institute for Manufacturing Technology of Ceramic Components and Composites, University of Stuttgart, Stuttgart 70569, Germany.
  • Advanced Materials Center, Faculty of Electronics, Telecommunications, and Informatics, Gdańsk University of Technology, Ul. G. Narutowicza 11/12, Gdańsk 80-233, Poland.
  • Department of Molecular Chemistry and Materials Science, Weizmann Institute of Science, Rehovot 7610001, Israel.
  • Department of Energy Conversion and Storage, Technical University of Denmark, Lyngby 2800, Denmark.

ORCID profiles: Ahsanul Kabir, Sebastian Molin, Igor Lubomirsky, Vincenzo Esposito

Funding

  • Bundesministerium f?r Bildung und Forschung
  • Deutscher Akademischer Austauschdienst
  • European Commission

Cite

APA

Kabir, A., Lemieszek, B., Varenik, M., Buratto Tinti, V., Molin, S., Lubomirsky, I., Esposito, V., & Kern, F. (2024). Enhanced Mechanical and Electromechanical Properties of Compositionally Complex Zirconia Zr 1– x (Gd 1/5 Pr 1/5 Nd 1/5 Sm 1/5 Y 1/5 ) x O 2−δ Ceramics. ACS Applied Materials & Interfaces, 16(10), 12765-12772. https://doi.org/10.1021/acsami.3c17501

Vancouver

Kabir A, Lemieszek B, Varenik M, Buratto Tinti V, Molin S, Lubomirsky I, et al. Enhanced Mechanical and Electromechanical Properties of Compositionally Complex Zirconia Zr 1– x (Gd 1/5 Pr 1/5 Nd 1/5 Sm 1/5 Y 1/5 ) x O 2−δ Ceramics. ACS Applied Materials & Interfaces. 2024;16(10):12765-12772. doi:10.1021/acsami.3c17501

BibTeX
@article{Kabir2024,
  author = {Kabir, Ahsanul and Lemieszek, Bartlomiej and Varenik, Maxim and Buratto Tinti, Victor and Molin, Sebastian and Lubomirsky, Igor and Esposito, Vincenzo and Kern, Frank},
  title = {Enhanced Mechanical and Electromechanical Properties of Compositionally Complex Zirconia Zr 1– x (Gd 1/5 Pr 1/5 Nd 1/5 Sm 1/5 Y 1/5 ) x O 2−δ Ceramics},
  journal = {ACS Applied Materials & Interfaces},
  year = {2024},
  volume = {16},
  number = {10},
  pages = {12765--12772},
  doi = {10.1021/acsami.3c17501}
}
Start for free →