EUVIMEDEUVIMED entdecken
Crossref

Lamination of >21% Efficient Perovskite Solar Cells with Independent Process Control of Transport Layers and Interfaces

Srinivas K Yadavalli, Clare L Lanaghan, Jack Palmer, Andrew J Gayle, Daniel Penley, Oluka Okia, Maria Zaccherini, Orlando Trejo, Sean P Dunfield, David P Fenning iD, Neil P Dasgupta iD

ACS Applied Materials & Interfaces · 03.04.2024 · 16 (13) · 16040-16049

DOI: 10.1021/acsami.3c16765 ↗

Kurz gefasst

Fachartikel in der Zeitschrift ACS Applied Materials & Interfaces, online erschienen am 22.03.2024. Verfasst von Srinivas K Yadavalli und 10 weiteren Autor:innen. Beteiligte Einrichtung: Department of Mechanical Engineering, University of Michigan, Ann Arbor, Michigan 48109, United States. Die Arbeit wurde bisher 17-mal zitiert (Crossref) und nennt 43 Literaturangaben. Gefördert von: Division of Graduate Education, Office of Energy Efficiency and Renewable Energy, Solar Energy Technologies Office.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Transport layer and interface optimization is critical for improving the performance and stability of perovskite solar cells (PSCs) but is restricted by the conventional fabrication approach of sequential layer deposition. While the bottom transport layer is processed with minimum constraints, the narrow thermal and chemical stability window of the halide perovskite (HP) layer severely restricts the choice of top transport layer and its processing conditions. To overcome these limitations, we demonstrate lamination of HPs─where two transport layer-perovskite half-stacks are independently processed and diffusion-bonded at the HP-HP interface─as an alternative fabrication strategy that enables self-encapsulated solar cells. Power conversion efficiencies (PCE) of >21% are realized using cells that incorporate a novel transport layer combination along with dual-interface passivation via self-assembled monolayers, both of which are uniquely enabled by the lamination approach. This is the highest reported PCE for any laminated PSC encapsulated between glass substrates. We further show that this approach expands the processing window beyond traditional fabrication processes and is adaptable for different transport layer compositions. The laminated PSCs retained >75% of their initial PCE after 1000 h of 1-sun illumination at 40 °C in air using an all-inorganic transport layer configuration without additional encapsulation. Furthermore, a laminated 1 cm2 device maintained a Voc of 1.16 V. The scalable lamination strategy in this study enables the implementation of new transport layers and interfacial engineering approaches for improving performance and stability.

Schlagwörter

Stichwörter der Autor:innen

interface engineeringlaminationmanufacturingperovskite solar cellsself-assembled monolayers

Autor:innen und Institutionen

  • Department of Mechanical Engineering, University of Michigan, Ann Arbor, Michigan 48109, United States.
  • Materials Science and Engineering Program, University of California, San Diego, La Jolla, California 92093, United States.
  • Department of Nanoengineering, University of California, San Diego, La Jolla, California 92093, United States.
  • Department of Materials Science & Engineering, University of Michigan, Ann Arbor, Michigan 48109, United States.

ORCID-Profile: David P Fenning, Neil P Dasgupta

Förderung

  • Division of Graduate Education
  • Office of Energy Efficiency and Renewable Energy
  • Solar Energy Technologies Office

Zitieren

APA

Yadavalli, S. K., Lanaghan, C. L., Palmer, J., Gayle, A. J., Penley, D., Okia, O., Zaccherini, M., Trejo, O., Dunfield, S. P., Fenning, D. P., & Dasgupta, N. P. (2024). Lamination of >21% Efficient Perovskite Solar Cells with Independent Process Control of Transport Layers and Interfaces. ACS Applied Materials & Interfaces, 16(13), 16040-16049. https://doi.org/10.1021/acsami.3c16765

Vancouver

Yadavalli SK, Lanaghan CL, Palmer J, Gayle AJ, Penley D, Okia O, et al. Lamination of >21% Efficient Perovskite Solar Cells with Independent Process Control of Transport Layers and Interfaces. ACS Applied Materials & Interfaces. 2024;16(13):16040-16049. doi:10.1021/acsami.3c16765

BibTeX
@article{Yadavalli2024,
  author = {Yadavalli, Srinivas K and Lanaghan, Clare L and Palmer, Jack and Gayle, Andrew J and Penley, Daniel and Okia, Oluka and Zaccherini, Maria and Trejo, Orlando and Dunfield, Sean P and Fenning, David P and Dasgupta, Neil P},
  title = {Lamination of >21% Efficient Perovskite Solar Cells with Independent Process Control of Transport Layers and Interfaces},
  journal = {ACS Applied Materials & Interfaces},
  year = {2024},
  volume = {16},
  number = {13},
  pages = {16040--16049},
  doi = {10.1021/acsami.3c16765}
}
Kostenlos starten →