Evaporated Self‐Assembled Monolayer Hole Transport Layers: Lossless Interfaces in p‐i‐n Perovskite Solar Cells
Advanced Energy Materials · 2023-02 · 13 (8)
DOI: 10.1002/aenm.202203982 ↗Kurz gefasst
Fachartikel in der Zeitschrift Advanced Energy Materials, online erschienen am 04.01.2023. Verfasst von Ahmed Farag und 16 weiteren Autor:innen. Die Arbeit wurde bisher 254-mal zitiert (Crossref) und nennt 105 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Helmholtz Association, Helmholtz Energy Materials Foundry.
Abstract (Originalsprache)
Engineering of the interface between perovskite absorber thin films and charge transport layers has fueled the development of perovskite solar cells (PSCs) over the past decade. For p‐i‐n PSCs, the development and adoption of hole transport layers utilizing self‐assembled monolayers (SAM‐HTLs) based on carbazole functional groups with phosphonic acid anchoring groups has enabled almost lossless contacts, minimizing interfacial recombination to advance power conversion efficiency in single‐junction and tandem solar cells. However, so far these materials have been deposited exclusively via solution‐based methods. Here, for the first time, vacuum‐based evaporation of the most common carbazole‐based SAM‐HTLs (2PACz, MeO‐2PACz, and Me‐4PACz) is reported. X‐ray photoelectron spectroscopy and infrared spectroscopy demonstrate no observable chemical differences in the evaporated SAMs compared to solution‐processed counterparts. Consequently, the near lossless interfacial properties are either preserved or even slightly improved as demonstrated via photoluminescence measurements and an enhancement in open‐circuit voltage. Strikingly, applying evaporated SAM‐HTLs to complete PSCs demonstrates comparable performance to their solution‐processed counterparts. Furthermore, vacuum deposition is found to improve perovskite wetting and fabrication yield on previously non‐ideal materials (namely Me‐4PACz) and to display conformal and high‐quality coating of micrometer‐sized textured surfaces, improving the versatility of these materials without sacrificing their beneficial properties.
Förderung
- Helmholtz Association
- Helmholtz Energy Materials Foundry
Zitieren
APA
Farag, A., Feeney, T., Hossain, I. M., Schackmar, F., Fassl, P., Küster, K., Bäuerle, R., Ruiz‐Preciado, M. A., Hentschel, M., Ritzer, D. B., Diercks, A., Li, Y., Nejand, B. A., Laufer, F., Singh, R., Starke, U., & Paetzold, U. W. (2023). Evaporated Self‐Assembled Monolayer Hole Transport Layers: Lossless Interfaces in p‐i‐n Perovskite Solar Cells. Advanced Energy Materials, 13(8). https://doi.org/10.1002/aenm.202203982
Vancouver
Farag A, Feeney T, Hossain IM, Schackmar F, Fassl P, Küster K, et al. Evaporated Self‐Assembled Monolayer Hole Transport Layers: Lossless Interfaces in p‐i‐n Perovskite Solar Cells. Advanced Energy Materials. 2023;13(8). doi:10.1002/aenm.202203982
BibTeX
@article{Farag2023,
author = {Farag, Ahmed and Feeney, Thomas and Hossain, Ihteaz M. and Schackmar, Fabian and Fassl, Paul and Küster, Kathrin and Bäuerle, Rainer and Ruiz‐Preciado, Marco A. and Hentschel, Mario and Ritzer, David B. and Diercks, Alexander and Li, Yang and Nejand, Bahram Abdollahi and Laufer, Felix and Singh, Roja and Starke, Ulrich and Paetzold, Ulrich W.},
title = {Evaporated Self‐Assembled Monolayer Hole Transport Layers: Lossless Interfaces in p‐i‐n Perovskite Solar Cells},
journal = {Advanced Energy Materials},
year = {2023},
volume = {13},
number = {8},
doi = {10.1002/aenm.202203982}
}
EUVIMED