EUVIMEDObjevte EUVIMED
Crossref

Solvent Effects on the Catalyst Ink and Layer Microstructure for Anion Exchange Membrane Fuel Cells

Chaoqi Han, Wenwen Shi, Mengxue Huang, Qi Wang, Jie Yang, Jingchao Chen, Ruimin Ding, Xi Yin iD

ACS Applied Materials & Interfaces · 2024-01-31 · 16 (4) · 4550-4560

DOI: 10.1021/acsami.3c14404 ↗

At a glance

Journal article in ACS Applied Materials & Interfaces, published online on 2024-01-17. Written by Chaoqi Han and 7 co-authors. Institution: State Key Laboratory of Coal Conversion, Institute of Coal Chemistry, Chinese Academy of Sciences, Taiyuan, Shanxi 030001, China. Cited 23 times so far (Crossref); 56 references. Funded by: Chinese Polar Environment Comprehensive Investigation and Assessment Programmes, Institute of Coal Chemistry, Chinese Academy of Sciences.

AbstraktSubjectsBibliografické údajeCiteRelated studies

Abstract (original language)

Understanding the complex solvent effects on the microstructures of ink and catalyst layer (CL) is crucial for the development of high-performance anion exchange membrane fuel cells (AEMFCs). Herein, we study the solvent effects within the binary solvent ink system composed of water, isopropyl alcohol (IPA), commercial anion exchange ionomer, and Pt/C catalyst. The results show that the Pt/C particles and ionomer tend to form large aggregates wrapped with a thick ionomer layer in IPA-rich ink and promote the formation of large mesopores within the CL. With the increase of the water content in the ink, Pt/C particles are more likely to bridge to each other through wrapped FAA to form a well-connected three-dimensional network. The CL fabricated using water-rich ink shows smaller pores, higher porosity, and a more homogeneous ionomer network without the formation of large aggregates. Based on these results, we propose that the properties of the solvent mixture, including dielectric constant (ε) and solubility parameter (δ), affect the coulomb interaction of charged particles and surface tension at interfaces, which in turn affects the microstructure of ink and CL. By leveraging the solvent effects, we optimize the CL microstructures and improve the performance of AEMFC. These results may guide the rational design and fabrication of AEMFCs.

Subjects

Author keywords

AEMFCCL microstructureink behaviorink compositionsolvent effect

Authors and institutions

  • State Key Laboratory of Coal Conversion, Institute of Coal Chemistry, Chinese Academy of Sciences, Taiyuan, Shanxi 030001, China.
  • School of Chemical Engineering, University of Chinese Academy of Sciences, Beijing 100049, China.

ORCID profiles: Xi Yin

Funding

  • Chinese Polar Environment Comprehensive Investigation and Assessment Programmes
  • Institute of Coal Chemistry, Chinese Academy of Sciences

Cite

APA

Han, C., Shi, W., Huang, M., Wang, Q., Yang, J., Chen, J., Ding, R., & Yin, X. (2024). Solvent Effects on the Catalyst Ink and Layer Microstructure for Anion Exchange Membrane Fuel Cells. ACS Applied Materials & Interfaces, 16(4), 4550-4560. https://doi.org/10.1021/acsami.3c14404

Vancouver

Han C, Shi W, Huang M, Wang Q, Yang J, Chen J, et al. Solvent Effects on the Catalyst Ink and Layer Microstructure for Anion Exchange Membrane Fuel Cells. ACS Applied Materials & Interfaces. 2024;16(4):4550-4560. doi:10.1021/acsami.3c14404

BibTeX
@article{Han2024,
  author = {Han, Chaoqi and Shi, Wenwen and Huang, Mengxue and Wang, Qi and Yang, Jie and Chen, Jingchao and Ding, Ruimin and Yin, Xi},
  title = {Solvent Effects on the Catalyst Ink and Layer Microstructure for Anion Exchange Membrane Fuel Cells},
  journal = {ACS Applied Materials & Interfaces},
  year = {2024},
  volume = {16},
  number = {4},
  pages = {4550--4560},
  doi = {10.1021/acsami.3c14404}
}
Start for free →