EUVIMEDOpdag EUVIMED
Crossref

Effect of Crown Ether Additives on the Enhanced Performance of Metallic Bipolar Plates for Proton Exchange Membrane Fuel Cells

Keun-Hwan Oh, Heejin Kim iD, Kwan Woo Nam iD

ACS Applied Materials & Interfaces · 2024-02-07 · 16 (5) · 5725-5734

DOI: 10.1021/acsami.3c13530 ↗

At a glance

Journal article in ACS Applied Materials & Interfaces, published online on 2024-01-25. Written by Keun-Hwan Oh and 2 co-authors. Institution: Hydrogen Energy Research Center, Korea Research Institute of Chemical Technology, 141 Gajeong-ro, Yuseong-gu, Daejeon 34114, Republic of Korea. Cited 5 times so far (Crossref); 60 references. Funded by: Korea Research Institute of Chemical Technology, National Research Foundation of Korea, Korea Basic Science Institute.

AbstractSubjectsBibliografiske oplysningerCiteRelated studies

Abstract (original language)

One of the key components of the fuel cell stack is a metallic bipolar plate (MBP) that plays multiple roles, such as current collector, fuel and oxidant distributor, and mechanical support. However, corrosion and consequent metal elution are major drawbacks of the MBP because they diminish the efficiency and power performance of membrane-electrode assemblies (MEAs). Herein, we show that the crown ether (CE) additive can simultaneously inhibit surface corrosion of the MBP and act as a scavenger for eluted metal ions to alleviate contamination of other components. From the electrochemical measurement, high-resolution imaging, and elemental analysis, we have found that the CE undergoes electrolytic decomposition and makes an efficient protective layer in an in situ manner. This layer prevents direct contact between the MBP and electrolyte as well as the dissolution of metal ions into the electrolyte. In addition, we demonstrate that the CE can improve the recovery protocol of the MEA owing to the formation of host-guest complexes between the CE and metal cations. These results provide key insights into the design of high-performance MBPs for proton-exchange membrane fuel cells.

Subjects

Author keywords

corrosion resistancecrown ethermetallic bipolar plateproton-exchange membrane fuel cellrecovery protocol

Authors and institutions

  • Hydrogen Energy Research Center, Korea Research Institute of Chemical Technology, 141 Gajeong-ro, Yuseong-gu, Daejeon 34114, Republic of Korea.
  • Division of Analytical Science, Korea Basic Science Institute, 169-148 Gwahak-ro, Yuseong-gu, Daejeon 34133, Republic of Korea.
  • Department of Chemical Engineering and Materials Science, and Graduate Program in System Health Science and Engineering, Ewha Womans University, Seoul 03760, Republic of Korea.

ORCID profiles: Heejin Kim, Kwan Woo Nam

Funding

  • Korea Research Institute of Chemical Technology
  • National Research Foundation of Korea
  • Korea Basic Science Institute
  • Ministry of Environment

Cite

APA

Oh, K. H., Kim, H., & Nam, K. W. (2024). Effect of Crown Ether Additives on the Enhanced Performance of Metallic Bipolar Plates for Proton Exchange Membrane Fuel Cells. ACS Applied Materials & Interfaces, 16(5), 5725-5734. https://doi.org/10.1021/acsami.3c13530

Vancouver

Oh KH, Kim H, Nam KW. Effect of Crown Ether Additives on the Enhanced Performance of Metallic Bipolar Plates for Proton Exchange Membrane Fuel Cells. ACS Applied Materials & Interfaces. 2024;16(5):5725-5734. doi:10.1021/acsami.3c13530

BibTeX
@article{Oh2024,
  author = {Oh, Keun-Hwan and Kim, Heejin and Nam, Kwan Woo},
  title = {Effect of Crown Ether Additives on the Enhanced Performance of Metallic Bipolar Plates for Proton Exchange Membrane Fuel Cells},
  journal = {ACS Applied Materials & Interfaces},
  year = {2024},
  volume = {16},
  number = {5},
  pages = {5725--5734},
  doi = {10.1021/acsami.3c13530}
}
Start for free →