EUVIMEDOpdag EUVIMED
Crossref

LiF-Rich Electrode–Electrolyte Interfaces Enabled by Bifunctional Electrolyte Additive to Achieve High-Performance Li/LiNi 0.8 Co 0.1 Mn 0.1 O 2 Batteries

Yue Lei, Xin Xu, Junying Yin, Jianping Xu, Kang Xi, Lai Wei, Haihua Wu, Sen Jiang, Yunfang Gao iD

ACS Applied Materials & Interfaces · 2023-10-11 · 15 (40) · 46941-46951

DOI: 10.1021/acsami.3c09641 ↗

At a glance

Journal article in ACS Applied Materials & Interfaces, published online on 2023-10-02. Written by Yue Lei and 8 co-authors. Institution: College of Chemical Engineering, Zhejiang University of Technology, Hangzhou, Zhejiang 310014, P. R. China. Cited 12 times so far (Crossref); 56 references. Funded by: Primary Research and Development Plan of Zhejiang Province, Zhejiang Xinmiao Talents Program.

AbstractSubjectsBibliografiske oplysningerCiteRelated studies

Abstract (original language)

Commercial Li-ion batteries use LiPF6-based carbonate electrolytes extensively, but there are many challenges associated with them, like dendritic Li growth and electrolyte decomposition, while supporting the aggressive chemical and electrochemical reactivity of lithium metal batteries (LMBs). This work proposes 1,1,1,3,3,3-hexafluoroisopropyl methacrylate (HFM) as a multifunctional electrolyte additive, constructing protective solid-/cathode-electrolyte interphases (SEI/CEI) on the surfaces for both lithium metal anode (LMA) and Ni-rich cathode to solve these challenges simultaneously. The highly fluorinated group (-CF3) of the HFM molecule contributes to the construction of SEI/CEI films rich in LiF that offer excellent electronic insulation, high mechanical strength, and surface energy. Accordingly, the HFM-derived LiF-rich interphases can minimize the electrolyte-electrode parasitic reactions and promote uniform Li deposition. Also, the problems of LiNi0.8Co0.1Mn0.1O2 particles' inner microcrack evolution and the growth of dendritic Li are adequately addressed. Consequently, the HFM additive enables a Li/LiNi0.8Co0.1Mn0.1O2 cell with higher capacity retention after 200 cycles at 1 C than the cell with no additive (74.7 vs 52.8%), as well as a better rate performance, especially at 9 C. Furthermore, at 0.5/0.5 mAh cm-2, the Li/Li symmetrical battery displays supersteadfast cyclic performance beyond 500 h when HFM is present. For high-performance LMBs, the HFM additive offers a straightforward, cost-effective route.

Subjects

Author keywords

1,1,1,3,3,3-hexafluoroisopropyl methacrylatecycling performanceelectrolyte additiveelectrolyte−electrode interphaseslithium metal batteries

Authors and institutions

  • College of Chemical Engineering, Zhejiang University of Technology, Hangzhou, Zhejiang 310014, P. R. China.
  • College of Chemical Engineering and Safety, Binzhou University, Binzhou, Shandong 256603, P. R. China.
  • Zhejiang Kan Battery Co., Ltd., Lishui, Zhejiang 323300, P. R. China.

ORCID profiles: Yunfang Gao

Funding

  • Primary Research and Development Plan of Zhejiang Province
  • Zhejiang Xinmiao Talents Program

Cite

APA

Lei, Y., Xu, X., Yin, J., Xu, J., Xi, K., Wei, L., Wu, H., Jiang, S., & Gao, Y. (2023). LiF-Rich Electrode–Electrolyte Interfaces Enabled by Bifunctional Electrolyte Additive to Achieve High-Performance Li/LiNi 0.8 Co 0.1 Mn 0.1 O 2 Batteries. ACS Applied Materials & Interfaces, 15(40), 46941-46951. https://doi.org/10.1021/acsami.3c09641

Vancouver

Lei Y, Xu X, Yin J, Xu J, Xi K, Wei L, et al. LiF-Rich Electrode–Electrolyte Interfaces Enabled by Bifunctional Electrolyte Additive to Achieve High-Performance Li/LiNi 0.8 Co 0.1 Mn 0.1 O 2 Batteries. ACS Applied Materials & Interfaces. 2023;15(40):46941-46951. doi:10.1021/acsami.3c09641

BibTeX
@article{Lei2023,
  author = {Lei, Yue and Xu, Xin and Yin, Junying and Xu, Jianping and Xi, Kang and Wei, Lai and Wu, Haihua and Jiang, Sen and Gao, Yunfang},
  title = {LiF-Rich Electrode–Electrolyte Interfaces Enabled by Bifunctional Electrolyte Additive to Achieve High-Performance Li/LiNi 0.8 Co 0.1 Mn 0.1 O 2 Batteries},
  journal = {ACS Applied Materials & Interfaces},
  year = {2023},
  volume = {15},
  number = {40},
  pages = {46941--46951},
  doi = {10.1021/acsami.3c09641}
}
Start for free →