EUVIMEDScopri EUVIMED
Übersichtsarbeit

Revealing Deformation Mechanisms in Polymer-Grafted Thermoplastic Elastomers via In Situ Small-Angle X-ray Scattering

Vincent M Torres, Erik Furton, Jensen N Sevening, Elisabeth C Lloyd iD, Masafumi Fukuto, Ruipeng Li, Darren C Pagan, Allison M Beese, Bryan D Vogt iD, Robert J Hickey iD

ACS Applied Materials & Interfaces · 2023-12-20 · 15 (50) · 57941-57949

DOI: 10.1021/acsami.3c09445 ↗

At a glance

Übersichtsarbeit in ACS Applied Materials & Interfaces, published online on 2023-10-10. Written by Vincent M Torres and 9 co-authors. Institution: Department of Chemistry, The Pennsylvania State University, University Park, Pennsylvania 16802, United States. Cited 8 times so far (Crossref); 55 references. Funded by: Division of Graduate Education, Division of Materials Research.

AbstractSubjectsDati bibliograficiCiteRelated studies

Abstract (original language)

The tunable properties of thermoplastic elastomers (TPEs), through polymer chemistry manipulations, enable these technologically critical materials to be employed in a broad range of applications. The need to "dial-in" the mechanical properties and responses of TPEs generally requires the design and synthesis of new macromolecules. In these designs, TPEs with nonlinear macromolecular architectures outperform the mechanical properties of their linear copolymer counterparts, but the differences in the deformation mechanism providing enhanced performance are unknown. Here, in situ small-angle X-ray scattering (SAXS) measurements during uniaxial extension reveal distinct deformation mechanisms between a commercially available linear poly(styrene)-poly(butadiene)-poly(styrene) (SBS) triblock copolymer and the grafted SBS version containing grafted poly(styrene) (PS) chains from the poly(butadiene) (PBD) midblock. The neat SBS (φSBS = 100%) sample deforms congruently with the macroscopic dimensions, with the domain spacing between spheres increasing and decreasing along and transverse to the stretch direction, respectively. At high extensions, end segment pullout from the PS-rich domains is detected, which is indicated by a disordering of SBS. Conversely, the PS-grafted SBS that is 30 vol % SBS and 70% styrene (φSBS = 30%) exhibits a lamellar morphology, and in situ SAXS measurements reveal an unexpected deformation mechanism. During deformation, there are two simultaneous processes: significant lamellar domain rearrangement to preferentially orient the lamellae planes parallel to the stretch direction and crazing. The samples whiten at high strains as expected for crazing, which corresponds with the emergence of features in the 2D SAXS pattern during stretching consistent with fibril-like structures that bridge the voids in crazes. The significant domain rearrangement in the grafted copolymers is attributed to the new junctions formed across multiple PS domains by the grafting of a single chain. The in situ SAXS measurements provide insights into the enhanced mechanical properties of grafted copolymers that arise through improved physical cross-linking that leads to nanostructure domain reorientation for self-reinforcement and craze formation where fibrils help to strengthen the polymer.

Subjects

Author keywords

block polymerscrazinggrafted polymersin situ measurementnanostructuretensile propertiestoughness

Authors and institutions

  • Department of Chemistry, The Pennsylvania State University, University Park, Pennsylvania 16802, United States.
  • Department of Materials Science and Engineering, The Pennsylvania State University, University Park, Pennsylvania 16802, United States.
  • National Synchrotron Light Source II, Brookhaven National Laboratory, Upton, New York 11973, United States.
  • Department of Mechanical Engineering, The Pennsylvania State University, University Park, Pennsylvania 16801, United States.
  • Materials Research Institute, The Pennsylvania State University, University Park, Pennsylvania 16802, United States.
  • Department of Chemical Engineering, The Pennsylvania State University, University Park, Pennsylvania 16802, United States.

ORCID profiles: Elisabeth C Lloyd, Bryan D Vogt, Robert J Hickey

Funding

  • Division of Graduate Education
  • Division of Materials Research

Cite

APA

Torres, V. M., Furton, E., Sevening, J. N., Lloyd, E. C., Fukuto, M., Li, R., Pagan, D. C., Beese, A. M., Vogt, B. D., & Hickey, R. J. (2023). Revealing Deformation Mechanisms in Polymer-Grafted Thermoplastic Elastomers via In Situ Small-Angle X-ray Scattering. ACS Applied Materials & Interfaces, 15(50), 57941-57949. https://doi.org/10.1021/acsami.3c09445

Vancouver

Torres VM, Furton E, Sevening JN, Lloyd EC, Fukuto M, Li R, et al. Revealing Deformation Mechanisms in Polymer-Grafted Thermoplastic Elastomers via In Situ Small-Angle X-ray Scattering. ACS Applied Materials & Interfaces. 2023;15(50):57941-57949. doi:10.1021/acsami.3c09445

BibTeX
@article{Torres2023,
  author = {Torres, Vincent M and Furton, Erik and Sevening, Jensen N and Lloyd, Elisabeth C and Fukuto, Masafumi and Li, Ruipeng and Pagan, Darren C and Beese, Allison M and Vogt, Bryan D and Hickey, Robert J},
  title = {Revealing Deformation Mechanisms in Polymer-Grafted Thermoplastic Elastomers via In Situ Small-Angle X-ray Scattering},
  journal = {ACS Applied Materials & Interfaces},
  year = {2023},
  volume = {15},
  number = {50},
  pages = {57941--57949},
  doi = {10.1021/acsami.3c09445}
}
Start for free →