Multimaterial Additively Manufactured Metamaterials Functionalized with Customizable Thermal Expansion in Multiple Directions
ACS Applied Materials & Interfaces · 11.10.2023 · 15 (40) · 47434-47446
DOI: 10.1021/acsami.3c08134 ↗Kurz gefasst
Fachartikel in der Zeitschrift ACS Applied Materials & Interfaces, online erschienen am 02.10.2023. Verfasst von Xiaoyujie Xiao und 4 weiteren Autor:innen. Beteiligte Einrichtung: Key Laboratory of Advanced Design and Simulation Techniques for Special Equipment, Ministry of Education, Hunan University, Changsha 410082, P. R. Ch…. Die Arbeit wurde bisher 37-mal zitiert (Crossref) und nennt 68 Literaturangaben. Gefördert von: Natural Science Foundation of?Hunan Province, Science and Technology Program of Hunan Province, National Natural Science Foundation of China.
Abstract (Originalsprache)
Metamaterials functionalized with customizable multidirectional coefficient of thermal expansion (CTE) are urgently needed for advanced shape control or dimensional stability under temperature variations. The currently reported metamaterials still lack the development of diverse base material systems and exploration of the multimaterial fabrication process. Especially, the reported range of customizable CTEs for metamaterials in multiple directions is limited within [-68.1, 56.4] ppm/°C. Here, this work explicitly proposes a strategy for closely linking base materials, additive manufacturing (AM) process, architecture, and CTE tunability, in order to provide a general guideline for the design or customization of such metamaterials. In detail, first, we systematically identify the key process parameters and related performance for additive manufacturing of polymers and propose various multimaterial systems such as polypropylene-polycarbonate (PP-PC). Then, six types of metamaterials have been fabricated with high quality by the established multimaterial additive manufacturing. By measuring the effective CTEs in multiple directions, the CTE tunability of metamaterials, including large positive values (+523.36 ppm/°C) and large negative values (-230.61 ppm/°C), far beyond the literature-reported CTE range, has been experimentally verified. Further, we have developed a bidirectional requirement-solution strategy here that acts as a bridge between design and fabrication. This work opens advanced avenues for metamaterials with multidirectionally customizable and extensive CTE tunability for a variety of engineering applications such as actuators, thermal stress relief, and improved structural stability.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Key Laboratory of Advanced Design and Simulation Techniques for Special Equipment, Ministry of Education, Hunan University, Changsha 410082, P. R. China.
- State Key Laboratory of Precision Manufacturing for Extreme Service Performance, Central South University, Changsha 410083, P. R. China.
ORCID-Profile: Kai Wei
Förderung
- Natural Science Foundation of?Hunan Province
- Science and Technology Program of Hunan Province
- National Natural Science Foundation of China
- Open Research Fund of State Key Laboratory of Precision Manufacturing for Extreme Service Performance,Central South University
Zitieren
APA
Xiao, X., Chen, J., Wang, K., Yu, Y., & Wei, K. (2023). Multimaterial Additively Manufactured Metamaterials Functionalized with Customizable Thermal Expansion in Multiple Directions. ACS Applied Materials & Interfaces, 15(40), 47434-47446. https://doi.org/10.1021/acsami.3c08134
Vancouver
Xiao X, Chen J, Wang K, Yu Y, Wei K. Multimaterial Additively Manufactured Metamaterials Functionalized with Customizable Thermal Expansion in Multiple Directions. ACS Applied Materials & Interfaces. 2023;15(40):47434-47446. doi:10.1021/acsami.3c08134
BibTeX
@article{Xiao2023,
author = {Xiao, Xiaoyujie and Chen, Jiaxin and Wang, Kaiyu and Yu, Yinzheng and Wei, Kai},
title = {Multimaterial Additively Manufactured Metamaterials Functionalized with Customizable Thermal Expansion in Multiple Directions},
journal = {ACS Applied Materials & Interfaces},
year = {2023},
volume = {15},
number = {40},
pages = {47434--47446},
doi = {10.1021/acsami.3c08134}
}
EUVIMED