EUVIMEDEUVIMED entdecken
Crossref

Thermal and Mechanical Behaviors of Additively Manufactured Multilevel TPMS Metamaterials With Nonlinear Graded Infill

Mingzhi Yao, Minzheng Zhu, Penghuan Wang, Mingkai Tang, Fangzhou Zhao, Junhao Cheng

Advanced Engineering Materials · 04.11.2026 · 28 (21)

DOI: 10.1002/adem.71231 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Advanced Engineering Materials, online erschienen am 30.08.2026. Verfasst von Mingzhi Yao und 5 weiteren Autor:innen. Die Arbeit nennt 40 Literaturangaben. Gefördert von: National Natural Science Foundation of China, Natural Science Foundation of Hubei Province.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Triply periodic minimal surface (TPMS) structures offer multifunctional potential. We propose a novel temperature‐guided multilevel TPMS design by infilling Diamond cells into an IWP framework with three spatial distributions. Ti6Al4V specimens were fabricated by laser powder bed fusion. Their transient thermal responses and room‐temperature quasi‐static compressive behaviors were evaluated separately through experiments and finite element simulations. These structures reduced top‐surface temperature by up to 80 °C versus primary IWP structures. In particular, the nonlinear graded configuration produced the lowest top‐surface temperature under the prescribed 300 s heating protocol, indicating delayed through‐thickness heat transfer. The separate thermal and mechanical assessments reveal a geometry‐mediated trade‐off between transient thermal‐shielding performance and compressive response. Although the temperature‐guided morphological heterogeneity reduces the elastic modulus, yield strength, and ultimate compressive strength, it disrupts coplanar stress concentration and promotes a more progressive 45° shear deformation mode, resulting in smoother post‐yield plateau responses. Therefore, the mechanical benefit of the multilevel configurations lies in their modified deformation mode and reduced stress oscillation rather than in improved overall load‐bearing strength or mechanical robustness. This study provides a field‐guided design strategy for load‐bearing and energy‐absorbing thermal‐protection lattices requiring delayed heat penetration and stable progressive deformation.

Förderung

  • National Natural Science Foundation of China
  • Natural Science Foundation of Hubei Province

Zitieren

APA

Yao, M., Zhu, M., Wang, P., Tang, M., Zhao, F., & Cheng, J. (2026). Thermal and Mechanical Behaviors of Additively Manufactured Multilevel TPMS Metamaterials With Nonlinear Graded Infill. Advanced Engineering Materials, 28(21). https://doi.org/10.1002/adem.71231

Vancouver

Yao M, Zhu M, Wang P, Tang M, Zhao F, Cheng J. Thermal and Mechanical Behaviors of Additively Manufactured Multilevel TPMS Metamaterials With Nonlinear Graded Infill. Advanced Engineering Materials. 2026;28(21). doi:10.1002/adem.71231

BibTeX
@article{Yao2026,
  author = {Yao, Mingzhi and Zhu, Minzheng and Wang, Penghuan and Tang, Mingkai and Zhao, Fangzhou and Cheng, Junhao},
  title = {Thermal and Mechanical Behaviors of Additively Manufactured Multilevel TPMS Metamaterials With Nonlinear Graded Infill},
  journal = {Advanced Engineering Materials},
  year = {2026},
  volume = {28},
  number = {21},
  doi = {10.1002/adem.71231}
}
Kostenlos starten →