EUVIMEDObjevte EUVIMED
Crossref

Achieving High-Performance Self-Powered Visible-Blind Ultraviolet Photodetection Using Alloy Engineering

Zhitao Shao, Lihang Qu, Mengqi Cui, Jing Yao, Feng Gao, Wei Feng iD, Huiqing Lu

ACS Applied Materials & Interfaces · 2023-09-20 · 15 (37) · 43994-44000

DOI: 10.1021/acsami.3c08077 ↗

At a glance

Journal article in ACS Applied Materials & Interfaces, published online on 2023-09-06. Written by Zhitao Shao and 6 co-authors. Institution: College of Chemistry, Chemical Engineering and Resource Utilization, Northeast Forestry University, Harbin 150040, China. Cited 25 times so far (Crossref); 40 references. Funded by: Fundamental Research Funds for the Central Universities.

AbstraktSubjectsBibliografické údajeCiteRelated studies

Abstract (original language)

The exploration and development of self-powered visible-blind ultraviolet photodetectors (VBUV PDs) with high responsivity and wavelength selectivity have far-reaching significance for versatile applications. Although In2O3 shows potential for UV detection due to good UV absorption and electrical transport properties, the poor wavelength selectivity impedes further application in VBUV PDs. Here, a self-powered photoelectrochemical-type (PEC) VBUV PD is demonstrated by using gallium-indium oxide alloys (Ga-In OAs). The self-powered Ga-In OAs-based PEC VBUV PDs exhibit good VBUV photodetection performance, including a high responsivity of 50.04 mA/W and a high detectivity of 6.03 × 1010 Jones under 254 nm light irradiation, a good wavelength selectivity (UV/visible light rejection ratio of 262.45), and a fast response time (0.45/0.38 s). The good self-powered VBUV detection performance of Ga-In OAs is attributed to the larger band gap and smaller charge-transfer resistance induced by alloy engineering, which not only suppresses the absorption of visible light but also accelerates interfacial charge transfer. Moreover, an underwater optical communication system is demonstrated by using the self-powered Ga-In OAs PEC VBUV PDs. This study demonstrates that alloy engineering is a powerful tool to improve the performance of In2O3-based PEC PDs, and Ga-In OAs have great application potential for underwater optoelectronic devices.

Subjects

Author keywords

Ga–InUV photodetectoroxide alloyphotoelectrochemicalvisible-blind

Authors and institutions

  • College of Chemistry, Chemical Engineering and Resource Utilization, Northeast Forestry University, Harbin 150040, China.
  • Key Laboratory for Photonic and Electronic Bandgap Materials, Ministry of Education, School of Physics and Electronic Engineering, Harbin Normal University, Harbin 150025, China.

ORCID profiles: Wei Feng

Funding

  • Fundamental Research Funds for the Central Universities

Cite

APA

Shao, Z., Qu, L., Cui, M., Yao, J., Gao, F., Feng, W., & Lu, H. (2023). Achieving High-Performance Self-Powered Visible-Blind Ultraviolet Photodetection Using Alloy Engineering. ACS Applied Materials & Interfaces, 15(37), 43994-44000. https://doi.org/10.1021/acsami.3c08077

Vancouver

Shao Z, Qu L, Cui M, Yao J, Gao F, Feng W, et al. Achieving High-Performance Self-Powered Visible-Blind Ultraviolet Photodetection Using Alloy Engineering. ACS Applied Materials & Interfaces. 2023;15(37):43994-44000. doi:10.1021/acsami.3c08077

BibTeX
@article{Shao2023,
  author = {Shao, Zhitao and Qu, Lihang and Cui, Mengqi and Yao, Jing and Gao, Feng and Feng, Wei and Lu, Huiqing},
  title = {Achieving High-Performance Self-Powered Visible-Blind Ultraviolet Photodetection Using Alloy Engineering},
  journal = {ACS Applied Materials & Interfaces},
  year = {2023},
  volume = {15},
  number = {37},
  pages = {43994--44000},
  doi = {10.1021/acsami.3c08077}
}
Start for free →