EUVIMEDObjevte EUVIMED
Crossref

Ionic Conductivity and Cycling Performance in PEO Polymer Electrolyte Enhanced by Non-Milled In Situ Nano-LLZO Powders

Qiang Shen, Dongyu Jiang, Shiyu Cao, Xinqi Lu, Chong Mao, Xiaobing Dai, Fei Chen iD

ACS Applied Materials & Interfaces · 2023-08-16 · 15 (32) · 38759-38768

DOI: 10.1021/acsami.3c06304 ↗

At a glance

Journal article in ACS Applied Materials & Interfaces, published online on 2023-08-01. Written by Qiang Shen and 6 co-authors. Institution: Hubei Longzhong Laboratory, Wuhan University of Technology Xiangyang Demonstration Zone, Xiangyang 441000, China. Cited 32 times so far (Crossref); 41 references. Funded by: National Key Research and Development Program of China, Basic and Applied Basic Research Foundation of Guangdong Province, National Natural Science Foundation of China.

AbstraktSubjectsBibliografické údajeCiteRelated studies

Abstract (original language)

High Li+ conductivity, good interfacial compatibility, and nano-scale particle size have always been essential conditions for selecting inorganic fillers in high-performance composite solid electrolytes. In this study, non-milled in situ LLZO fillers with nanosize was synthesized via the sol-gel method by rapid heating sintering, which resulted in more surface defects and fewer impurities in LLZO. Compared with milled LLZO fillers, these non-milled LLZO fillers with more surface defects and fewer impurities can effectively reduce the crystallinity of PEO and agglomeration in PEO, which can form composite electrolytes with high Li+ conductivity. Most importantly, the discharge capacity of the 7.5% non-milled LLZO-PEO-based LiFePO4/Li battery is about 135.5 mA h g-1 at 1C and 60 °C. After 100 cycles, the discharge specific capacity remains at 99%. It is worth noting that nano-sized non-milled LLZO will improve the discharge capacity of LiFePO4/Li batteries to 122.1 mA h g-1 at 0.2C and 30 °C.

Subjects

Author keywords

composite electrolytenano-sized LLZO powdernon-milledrapid heating sinteringsurface defects

Authors and institutions

  • Hubei Longzhong Laboratory, Wuhan University of Technology Xiangyang Demonstration Zone, Xiangyang 441000, China.
  • State Key Lab of Advanced Technology for Materials Synthesis and Processing, Wuhan University of Technology, Wuhan 430070, China.
  • Zhuhai Smoothway Electronic Materials Co., Ltd, Zhuhai 519110, P. R. China.

ORCID profiles: Fei Chen

Funding

  • National Key Research and Development Program of China
  • Basic and Applied Basic Research Foundation of Guangdong Province
  • National Natural Science Foundation of China
  • Hubei Longzhong Laboratory
  • China Manned Space Agency
  • State Key Laboratory of Science and Technology on Materials under Shock and Impact

Cite

APA

Shen, Q., Jiang, D., Cao, S., Lu, X., Mao, C., Dai, X., & Chen, F. (2023). Ionic Conductivity and Cycling Performance in PEO Polymer Electrolyte Enhanced by Non-Milled In Situ Nano-LLZO Powders. ACS Applied Materials & Interfaces, 15(32), 38759-38768. https://doi.org/10.1021/acsami.3c06304

Vancouver

Shen Q, Jiang D, Cao S, Lu X, Mao C, Dai X, et al. Ionic Conductivity and Cycling Performance in PEO Polymer Electrolyte Enhanced by Non-Milled In Situ Nano-LLZO Powders. ACS Applied Materials & Interfaces. 2023;15(32):38759-38768. doi:10.1021/acsami.3c06304

BibTeX
@article{Shen2023,
  author = {Shen, Qiang and Jiang, Dongyu and Cao, Shiyu and Lu, Xinqi and Mao, Chong and Dai, Xiaobing and Chen, Fei},
  title = {Ionic Conductivity and Cycling Performance in PEO Polymer Electrolyte Enhanced by Non-Milled In Situ Nano-LLZO Powders},
  journal = {ACS Applied Materials & Interfaces},
  year = {2023},
  volume = {15},
  number = {32},
  pages = {38759--38768},
  doi = {10.1021/acsami.3c06304}
}
Start for free →