EUVIMEDEUVIMED entdecken
Crossref

Ionic Conductivity and Cycling Performance in PEO Polymer Electrolyte Enhanced by Non-Milled In Situ Nano-LLZO Powders

Qiang Shen, Dongyu Jiang, Shiyu Cao, Xinqi Lu, Chong Mao, Xiaobing Dai, Fei Chen iD

ACS Applied Materials & Interfaces · 16.08.2023 · 15 (32) · 38759-38768

DOI: 10.1021/acsami.3c06304 ↗

Kurz gefasst

Fachartikel in der Zeitschrift ACS Applied Materials & Interfaces, online erschienen am 01.08.2023. Verfasst von Qiang Shen und 6 weiteren Autor:innen. Beteiligte Einrichtung: Hubei Longzhong Laboratory, Wuhan University of Technology Xiangyang Demonstration Zone, Xiangyang 441000, China. Die Arbeit wurde bisher 32-mal zitiert (Crossref) und nennt 41 Literaturangaben. Gefördert von: National Key Research and Development Program of China, Basic and Applied Basic Research Foundation of Guangdong Province, National Natural Science Foundation of China.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

High Li+ conductivity, good interfacial compatibility, and nano-scale particle size have always been essential conditions for selecting inorganic fillers in high-performance composite solid electrolytes. In this study, non-milled in situ LLZO fillers with nanosize was synthesized via the sol-gel method by rapid heating sintering, which resulted in more surface defects and fewer impurities in LLZO. Compared with milled LLZO fillers, these non-milled LLZO fillers with more surface defects and fewer impurities can effectively reduce the crystallinity of PEO and agglomeration in PEO, which can form composite electrolytes with high Li+ conductivity. Most importantly, the discharge capacity of the 7.5% non-milled LLZO-PEO-based LiFePO4/Li battery is about 135.5 mA h g-1 at 1C and 60 °C. After 100 cycles, the discharge specific capacity remains at 99%. It is worth noting that nano-sized non-milled LLZO will improve the discharge capacity of LiFePO4/Li batteries to 122.1 mA h g-1 at 0.2C and 30 °C.

Schlagwörter

Stichwörter der Autor:innen

composite electrolytenano-sized LLZO powdernon-milledrapid heating sinteringsurface defects

Autor:innen und Institutionen

  • Hubei Longzhong Laboratory, Wuhan University of Technology Xiangyang Demonstration Zone, Xiangyang 441000, China.
  • State Key Lab of Advanced Technology for Materials Synthesis and Processing, Wuhan University of Technology, Wuhan 430070, China.
  • Zhuhai Smoothway Electronic Materials Co., Ltd, Zhuhai 519110, P. R. China.

ORCID-Profile: Fei Chen

Förderung

  • National Key Research and Development Program of China
  • Basic and Applied Basic Research Foundation of Guangdong Province
  • National Natural Science Foundation of China
  • Hubei Longzhong Laboratory
  • China Manned Space Agency
  • State Key Laboratory of Science and Technology on Materials under Shock and Impact

Zitieren

APA

Shen, Q., Jiang, D., Cao, S., Lu, X., Mao, C., Dai, X., & Chen, F. (2023). Ionic Conductivity and Cycling Performance in PEO Polymer Electrolyte Enhanced by Non-Milled In Situ Nano-LLZO Powders. ACS Applied Materials & Interfaces, 15(32), 38759-38768. https://doi.org/10.1021/acsami.3c06304

Vancouver

Shen Q, Jiang D, Cao S, Lu X, Mao C, Dai X, et al. Ionic Conductivity and Cycling Performance in PEO Polymer Electrolyte Enhanced by Non-Milled In Situ Nano-LLZO Powders. ACS Applied Materials & Interfaces. 2023;15(32):38759-38768. doi:10.1021/acsami.3c06304

BibTeX
@article{Shen2023,
  author = {Shen, Qiang and Jiang, Dongyu and Cao, Shiyu and Lu, Xinqi and Mao, Chong and Dai, Xiaobing and Chen, Fei},
  title = {Ionic Conductivity and Cycling Performance in PEO Polymer Electrolyte Enhanced by Non-Milled In Situ Nano-LLZO Powders},
  journal = {ACS Applied Materials & Interfaces},
  year = {2023},
  volume = {15},
  number = {32},
  pages = {38759--38768},
  doi = {10.1021/acsami.3c06304}
}
Kostenlos starten →