EUVIMEDOpdag EUVIMED
Open access · CC BY 4.0

How the Porous Transport Layer Interface Affects Catalyst Utilization and Performance in Polymer Electrolyte Water Electrolysis

Carl Cesar Weber, Jacob A Wrubel, Lorenz Gubler iD, Guido Bender, Salvatore De Angelis iD, Felix N Büchi iD

ACS Applied Materials & Interfaces · 2023-07-26 · 15 (29) · 34750-34763

DOI: 10.1021/acsami.3c04151 ↗

At a glance

Journal article in ACS Applied Materials & Interfaces, published online on 2023-07-17. Written by Carl Cesar Weber and 5 co-authors. Institution: Electrochemistry Laboratory, Paul Scherrer Institut, 5232 Villigen PSI, Switzerland. Cited 119 times so far (Crossref); 54 references. The full text is freely available (open access, CC BY 4.0). Funded by: National Renewable Energy Laboratory.

AbstractSubjectsBibliografiske oplysningerCiteRelated studies

Abstract (original language)

Cost reduction and fast scale-up of electrolyzer technologies are essential for decarbonizing several crucial branches of industry. For polymer electrolyte water electrolysis, this requires a dramatic reduction of the expensive and scarce iridium-based catalyst, making its efficient utilization a key factor. The interfacial properties between the porous transport layer (PTL) and the catalyst layer (CL) are crucial for optimal catalyst utilization. Therefore, it is essential to understand the relationship between this interface and electrochemical performance. In this study, we fabricated a matrix of two-dimensional interface layers with a well-known model structure, integrating them as an additional layer between the PTL and the CL. By characterizing the performance and conducting an in-depth analysis of the overpotentials, we were able to estimate the catalyst utilization at different current densities, correlating them to the geometric properties of the model PTLs. We found that large areas of the CL become inactive at increasing current density either due to dry-out, oxygen saturation (under the PTL), or the high resistance of the CL away from the pore edges. We experimentally estimated the water penetration in the CL under the PTL to be ≈20 μm. Experimental results were corroborated using a 3D-multiphysics model to calculate the current distribution in the CL and estimate the impact of membrane dry-out. Finally, we observed a strong pressure dependency on performance and high-frequency resistance, which indicates that with the employed model PTLs, a significant gas phase accumulates in the CL under the lands, hindering the distribution of liquid water. The findings of this work can be extrapolated to improve and engineer PTLs with advanced interface properties, helping to reach the required target goals in cost and iridium loadings.

Subjects

Author keywords

PEM electrolysisactive catalyst layercatalyst utilizationhydrogeninterface PTL/CLiridium loadingpolymer electrolyte water electrolysisporous transport layer

Authors and institutions

  • Electrochemistry Laboratory, Paul Scherrer Institut, 5232 Villigen PSI, Switzerland.
  • National Renewable Energy Laboratory, Golden, Colorado 80401, United States.

ORCID profiles: Lorenz Gubler, Salvatore De Angelis, Felix N Büchi

Funding

  • National Renewable Energy Laboratory

Cite

APA

Weber, C. C., Wrubel, J. A., Gubler, L., Bender, G., De Angelis, S., & Büchi, F. N. (2023). How the Porous Transport Layer Interface Affects Catalyst Utilization and Performance in Polymer Electrolyte Water Electrolysis. ACS Applied Materials & Interfaces, 15(29), 34750-34763. https://doi.org/10.1021/acsami.3c04151

Vancouver

Weber CC, Wrubel JA, Gubler L, Bender G, De Angelis S, Büchi FN. How the Porous Transport Layer Interface Affects Catalyst Utilization and Performance in Polymer Electrolyte Water Electrolysis. ACS Applied Materials & Interfaces. 2023;15(29):34750-34763. doi:10.1021/acsami.3c04151

BibTeX
@article{Weber2023,
  author = {Weber, Carl Cesar and Wrubel, Jacob A and Gubler, Lorenz and Bender, Guido and De Angelis, Salvatore and Büchi, Felix N},
  title = {How the Porous Transport Layer Interface Affects Catalyst Utilization and Performance in Polymer Electrolyte Water Electrolysis},
  journal = {ACS Applied Materials & Interfaces},
  year = {2023},
  volume = {15},
  number = {29},
  pages = {34750--34763},
  doi = {10.1021/acsami.3c04151}
}
Start for free →