p-Type Conversion of WS 2 and WSe 2 by Position-Selective Oxidation Doping and Its Application in Top Gate Transistors
ACS Applied Materials & Interfaces · 2023-06-07 · 15 (22) · 26977-26984
DOI: 10.1021/acsami.3c04052 ↗At a glance
Journal article in ACS Applied Materials & Interfaces, published online on 2023-05-24. Written by Ryoichi Kato and 7 co-authors. Institution: Department of Materials Engineering, The University of Tokyo, Tokyo 113-8656, Japan. Cited 41 times so far (Crossref); 67 references. Funded by: Japan Society for the Promotion of Science, Japan Science and Technology Agency, National Institute of Information and Communications Technology.
Abstract (original language)
For the complementary operation of two-dimensional (2D) material-based field-effect transistors (FETs), high-performance p-type FETs are essential. In this study, we applied surface charge-transfer doping from WOx, which has a large work function of ∼6.5 eV, selectively to the access region of WS2 and WSe2 by covering the channel region with h-BN. By reducing the Schottky barrier width at the contact and injecting holes into the valence band, the p-type conversion of intrinsically n-type trilayer WSe2 FET was successfully achieved. However, trilayer WS2 did not show clear p-type conversion because its valence band maximum is 0.66 eV lower than that of trilayer WSe2. Although inorganic WOx boasts high air stability and fabrication process compatibility due to its high thermal budget, the trap sites in WOx cause large hysteresis during back gate operation of WSe2 FETs. However, by using top gate (TG) operation with an h-BN protection layer as a TG insulator, a high-performance p-type WSe2 FET with negligible hysteresis was achieved.
Subjects
Author keywords
Authors and institutions
- Department of Materials Engineering, The University of Tokyo, Tokyo 113-8656, Japan.
- Department of Electronics, Nagoya University, Nagoya 464-8603, Japan.
- Department of Chemistry, Saitama University, Saitama 338-8570, Japan.
- International Center for Materials Nanoarchitectonics, National Institute for Materials Science, Ibaraki 305-0044, Japan.
- Research Center for Functional Materials, National Institute for Materials Science, Ibaraki 305-0044, Japan.
- Taiwan Semiconductor Manufacturing Company (TSMC), Ltd., Hsinchu 300-75, Taiwan.
ORCID profiles: Tomonori Nishimura, Takashi Taniguchi, Kenji Watanabe, Kosuke Nagashio
Funding
- Japan Society for the Promotion of Science
- Japan Science and Technology Agency
- National Institute of Information and Communications Technology
Cite
APA
Kato, R., Uchiyama, H., Nishimura, T., Ueno, K., Taniguchi, T., Watanabe, K., Chen, E., & Nagashio, K. (2023). p-Type Conversion of WS 2 and WSe 2 by Position-Selective Oxidation Doping and Its Application in Top Gate Transistors. ACS Applied Materials & Interfaces, 15(22), 26977-26984. https://doi.org/10.1021/acsami.3c04052
Vancouver
Kato R, Uchiyama H, Nishimura T, Ueno K, Taniguchi T, Watanabe K, et al. p-Type Conversion of WS 2 and WSe 2 by Position-Selective Oxidation Doping and Its Application in Top Gate Transistors. ACS Applied Materials & Interfaces. 2023;15(22):26977-26984. doi:10.1021/acsami.3c04052
BibTeX
@article{Kato2023,
author = {Kato, Ryoichi and Uchiyama, Haruki and Nishimura, Tomonori and Ueno, Keiji and Taniguchi, Takashi and Watanabe, Kenji and Chen, Edward and Nagashio, Kosuke},
title = {p-Type Conversion of WS 2 and WSe 2 by Position-Selective Oxidation Doping and Its Application in Top Gate Transistors},
journal = {ACS Applied Materials & Interfaces},
year = {2023},
volume = {15},
number = {22},
pages = {26977--26984},
doi = {10.1021/acsami.3c04052}
}
EUVIMED