EUVIMEDEUVIMED entdecken
Crossref

Mechanically Robust Ultrathin Solid Electrolyte Membranes Using a Porous Net Template for All-Solid-State Batteries

Seok Hun Kang iD, Jaecheol Choi, Ju Young Kim iD, Dong Ok Shin iD, Young-Gi Lee iD, Jinwoo Lee iD

ACS Applied Materials & Interfaces · 14.06.2023 · 15 (23) · 28064-28072

DOI: 10.1021/acsami.3c03466 ↗

Kurz gefasst

Fachartikel in der Zeitschrift ACS Applied Materials & Interfaces, online erschienen am 23.05.2023. Verfasst von Seok Hun Kang und 5 weiteren Autor:innen. Beteiligte Einrichtung: Materials and Components Research Division, Electronics and Telecommunications Research Institute (ETRI), 218 Gajeongno, Yuseong-gu, Daejeon 34129, R…. Die Arbeit wurde bisher 27-mal zitiert (Crossref) und nennt 49 Literaturangaben. Gefördert von: Ministry of Trade, Industry and Energy.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

All-solid-state batteries (ASBs) have been identified as a potential next-generation technology for safe energy storage. However, the current pellet form of solid electrolytes (SEs) exhibits low cell-level energy densities and mechanical brittleness, and this has hampered the commercialization of ASBs. In this work, we report on the development of an ultrathin SE membrane that can be reduced to a thickness of 31 μm with minimal thermal shrinkage at 140 °C, while exhibiting robust mechanical properties (tensile strength of 19.6 MPa). Due to its exceptional ionic conductivity of 0.55 mS/cm and the corresponding areal conductance of 84 mS/cm2, the SE membrane-incorporated ASB displays cell-level gravimetric and volumetric energy densities of 127.9 Wh/kgcell and 140.7 Wh/Lcell, respectively. These values represent a 7.6- and 5.7-fold increase over those achieved with conventional SE pellet cells. Our results demonstrate the potential of the developed SE membrane to overcome the critical challenges in the commercialization of ASBs.

Schlagwörter

Stichwörter der Autor:innen

all-solid-state batteryargyroditesolid electrolyte membranesulfide solid electrolytethin and flexible

Autor:innen und Institutionen

  • Materials and Components Research Division, Electronics and Telecommunications Research Institute (ETRI), 218 Gajeongno, Yuseong-gu, Daejeon 34129, Republic of Korea.
  • Chemical and Biomolecular Engineering, Korea Advanced Institute of Science and Technology (KAIST), 291 Daehak-Ro, Yuseong-Gu, Daejeon 34141, Republic of Korea.

ORCID-Profile: Seok Hun Kang, Ju Young Kim, Dong Ok Shin, Young-Gi Lee, Jinwoo Lee

Förderung

  • Ministry of Trade, Industry and Energy

Zitieren

APA

Kang, S. H., Choi, J., Kim, J. Y., Shin, D. O., Lee, Y. G., & Lee, J. (2023). Mechanically Robust Ultrathin Solid Electrolyte Membranes Using a Porous Net Template for All-Solid-State Batteries. ACS Applied Materials & Interfaces, 15(23), 28064-28072. https://doi.org/10.1021/acsami.3c03466

Vancouver

Kang SH, Choi J, Kim JY, Shin DO, Lee YG, Lee J. Mechanically Robust Ultrathin Solid Electrolyte Membranes Using a Porous Net Template for All-Solid-State Batteries. ACS Applied Materials & Interfaces. 2023;15(23):28064-28072. doi:10.1021/acsami.3c03466

BibTeX
@article{Kang2023,
  author = {Kang, Seok Hun and Choi, Jaecheol and Kim, Ju Young and Shin, Dong Ok and Lee, Young-Gi and Lee, Jinwoo},
  title = {Mechanically Robust Ultrathin Solid Electrolyte Membranes Using a Porous Net Template for All-Solid-State Batteries},
  journal = {ACS Applied Materials & Interfaces},
  year = {2023},
  volume = {15},
  number = {23},
  pages = {28064--28072},
  doi = {10.1021/acsami.3c03466}
}
Kostenlos starten →