EUVIMEDOpdag EUVIMED
Crossref

Superhydrophobic/Superhydrophilic Janus Evaporator for Extreme High Salt-Resistance Solar Desalination by an Integrated 3D Printing Method

Congcan Shi, Zhenhua Wu, Yike Li, Xue Zhang, Yizhuo Xu, Aotian Chen, Chunze Yan iD, Yusheng Shi, Tao Wang, Bin Su iD

ACS Applied Materials & Interfaces · 2023-05-17 · 15 (19) · 23971-23979

DOI: 10.1021/acsami.3c03320 ↗

At a glance

Journal article in ACS Applied Materials & Interfaces, published online on 2023-05-02. Written by Congcan Shi and 9 co-authors. Institution: State Key Laboratory of Material Processing and Die & Mold Technology, School of Materials Science and Engineering, Huazhong University of Science an…. Cited 65 times so far (Crossref); 41 references. Funded by: National Natural Science Foundation of China.

AbstractSubjectsBibliografiske oplysningerCiteRelated studies

Abstract (original language)

The emerging solar desalination technology has incomparable advantages for providing a clean water solution. However, the issue of salt accumulation on the solar evaporator tops during the steam generation leads to a considerable decrease in the evaporation rate. Herein, we demonstrate a superhydrophobic/superhydrophilic Janus evaporator that enables a stable solar evaporation even in saturated brine. Our Janus solar evaporator with a superhydrophobic top and a superhydrophilic bottom has been manufactured integrally, allowing for a fast steam evaporation without the impediment of the accumulated salt residues. The superhydrophobic top changes the water passageway from the center toward the edges while it allows for the vertical transport of both solar thermo and evaporated steams. Salt residues would only be deposited at the edges of the superhydrophilic bottom, allowing for a long-term stability of the evaporator for a continuous (>50 h) solar evaporation in saturated brine, which is record-breaking for salt-resistant solar evaporators. With stable and efficient evaporation performance out of high-salinity brine, this work provides a fascinating avenue for the desalination of seawater in a salt-resistant and efficient manner.

Subjects

Author keywords

3D printingJanus evaporatorsalt-resistantselective laser sinteringsolar desalination

Authors and institutions

  • State Key Laboratory of Material Processing and Die & Mold Technology, School of Materials Science and Engineering, Huazhong University of Science and Technology, Wuhan 430074, Hubei, P. R. China.
  • China National Pulp and Paper Research Institute Co., Ltd., Beijing 100102, PR China.
  • Guangdong Ruipeng Material & Science Co., Ltd., Foshan 528000, PR China.

ORCID profiles: Chunze Yan, Bin Su

Funding

  • National Natural Science Foundation of China

Cite

APA

Shi, C., Wu, Z., Li, Y., Zhang, X., Xu, Y., Chen, A., Yan, C., Shi, Y., Wang, T., & Su, B. (2023). Superhydrophobic/Superhydrophilic Janus Evaporator for Extreme High Salt-Resistance Solar Desalination by an Integrated 3D Printing Method. ACS Applied Materials & Interfaces, 15(19), 23971-23979. https://doi.org/10.1021/acsami.3c03320

Vancouver

Shi C, Wu Z, Li Y, Zhang X, Xu Y, Chen A, et al. Superhydrophobic/Superhydrophilic Janus Evaporator for Extreme High Salt-Resistance Solar Desalination by an Integrated 3D Printing Method. ACS Applied Materials & Interfaces. 2023;15(19):23971-23979. doi:10.1021/acsami.3c03320

BibTeX
@article{Shi2023,
  author = {Shi, Congcan and Wu, Zhenhua and Li, Yike and Zhang, Xue and Xu, Yizhuo and Chen, Aotian and Yan, Chunze and Shi, Yusheng and Wang, Tao and Su, Bin},
  title = {Superhydrophobic/Superhydrophilic Janus Evaporator for Extreme High Salt-Resistance Solar Desalination by an Integrated 3D Printing Method},
  journal = {ACS Applied Materials & Interfaces},
  year = {2023},
  volume = {15},
  number = {19},
  pages = {23971--23979},
  doi = {10.1021/acsami.3c03320}
}
Start for free →