EUVIMEDOpdag EUVIMED
Crossref

Utilizing VO 2 as a Hole Injection Layer for Efficient Charge Injection in Quantum Dot Light-Emitting Diodes Enables High Device Performance

Han Bin Cho, Ju Yeon Han, Ha Jun Kim, Noolu Srinivasa Manikanta Viswanath, Yong Min Park, Jeong Wan Min, Sung Woo Jang, Heesun Yang iD, Won Bin Im iD

ACS Applied Materials & Interfaces · 2023-06-21 · 15 (24) · 29259-29266

DOI: 10.1021/acsami.3c02857 ↗

At a glance

Journal article in ACS Applied Materials & Interfaces, published online on 2023-06-08. Written by Han Bin Cho and 8 co-authors. Institution: Division of Materials Science and Engineering, Hanyang University, 222 Wangsimni-ro, Seongdong-gu, Seoul 04763, Republic of Korea. Cited 20 times so far (Crossref); 34 references. Funded by: Samsung, National Research Foundation of Korea, Ministry of Trade, Industry and Energy.

AbstractSubjectsBibliografiske oplysningerCiteRelated studies

Abstract (original language)

Quantum dot light-emitting diodes (QLEDs) are promising devices for display applications. Polyethylenedioxythiophene:polystyrene sulfonate (PEDOT:PSS) is a common hole injection layer (HIL) material in optoelectronic devices because of its high conductivity and high work function. Nevertheless, PEDOT:PSS-based QLEDs have a high energy barrier for hole injection, which results in low device efficiency. Therefore, a new strategy is needed to improve the device efficiency. Herein, we have demonstrated a bilayer-HIL using VO2 and a PEDOT:PSS-based QLED that exhibits an 18% external quantum efficiency (EQE), 78 cd/A current efficiency (CE), and 25,771 cd/m2 maximum luminance. In contrast, the PEDOT:PSS-based QLED exhibits an EQE of 13%, CE of 54 cd/A, and maximum luminance of 14,817 cd/m2. An increase in EQE was attributed to a reduction in the energy barrier between indium tin oxide (ITO) and PEDOT:PSS, caused by the insertion of a VO2 HIL. Therefore, our results could demonstrate that using a bilayer-HIL is effective in increasing the EQE in QLEDs.

Subjects

Author keywords

hole injection layerlight extractionquantum dot light-emitting diodesrapid thermal annealingthermal stabilityvanadium dioxide

Authors and institutions

  • Division of Materials Science and Engineering, Hanyang University, 222 Wangsimni-ro, Seongdong-gu, Seoul 04763, Republic of Korea.
  • Department of Materials Science and Engineering, Hongik University, 94 Wausan-ro, Mapo-gu, Seoul 04066, Republic of Korea.

ORCID profiles: Heesun Yang, Won Bin Im

Funding

  • Samsung
  • National Research Foundation of Korea
  • Ministry of Trade, Industry and Energy
  • Korea Institute for Advancement of Technology

Cite

APA

Cho, H. B., Han, J. Y., Kim, H. J., Viswanath, N. S. M., Park, Y. M., Min, J. W., Jang, S. W., Yang, H., & Im, W. B. (2023). Utilizing VO 2 as a Hole Injection Layer for Efficient Charge Injection in Quantum Dot Light-Emitting Diodes Enables High Device Performance. ACS Applied Materials & Interfaces, 15(24), 29259-29266. https://doi.org/10.1021/acsami.3c02857

Vancouver

Cho HB, Han JY, Kim HJ, Viswanath NSM, Park YM, Min JW, et al. Utilizing VO 2 as a Hole Injection Layer for Efficient Charge Injection in Quantum Dot Light-Emitting Diodes Enables High Device Performance. ACS Applied Materials & Interfaces. 2023;15(24):29259-29266. doi:10.1021/acsami.3c02857

BibTeX
@article{Cho2023,
  author = {Cho, Han Bin and Han, Ju Yeon and Kim, Ha Jun and Viswanath, Noolu Srinivasa Manikanta and Park, Yong Min and Min, Jeong Wan and Jang, Sung Woo and Yang, Heesun and Im, Won Bin},
  title = {Utilizing VO 2 as a Hole Injection Layer for Efficient Charge Injection in Quantum Dot Light-Emitting Diodes Enables High Device Performance},
  journal = {ACS Applied Materials & Interfaces},
  year = {2023},
  volume = {15},
  number = {24},
  pages = {29259--29266},
  doi = {10.1021/acsami.3c02857}
}
Start for free →