EUVIMEDOpdag EUVIMED
Crossref

Space-Charging Interfacial Layer by Illumination for Efficient Sb 2 S 3 Bulk-Heterojunction Solar Cells with High Open-Circuit Voltage

Rong Liu, Zhitao Shen iD, Liangxin Zhu, Jia Huang, Huilin Li iD, Junwei Chen, Chao Dong iD, Tao Chen iD, Shangfeng Yang iD, Chong Chen iD, Mingtai Wang iD

ACS Applied Materials & Interfaces · 2023-05-24 · 15 (20) · 24583-24594

DOI: 10.1021/acsami.3c02843 ↗

At a glance

Journal article in ACS Applied Materials & Interfaces, published online on 2023-05-12. Written by Rong Liu and 10 co-authors. Institution: Institute of Solid State Physics, HFIPS, Chinese Academy of Sciences, Hefei 230031, P. R. China. Cited 18 times so far (Crossref); 40 references. Funded by: Anhui Postdoctoral Science Foundation, Hefei Institutes of Physical Science, Chinese Academy of Sciences, Hefei Science Center, Chinese Academy of Sciences.

AbstractSubjectsBibliografiske oplysningerCiteRelated studies

Abstract (original language)

Solution-processed material systems for effective photovoltaic conversion are the key to low-cost and efficient solar cells. While antimony trisulfide (Sb2S3) is a promising photovoltaic absorber, solution-processed quality Sb2S3-based heterojunction systems for solar cells, particularly with an open-circuit voltage (Voc) higher than 0.70 V, are challenging issues. Here, a cadmium sulfide (CdS) interfacial engineering method is developed for the Sb2S3-based bulk-heterojunction (BHJ) solar cells with an efficiency of 6.14% and a Voc up to 0.76 V that is the highest one among solution-processed Sb2S3 solar cells. The prepared Sb2S3-based BHJ solar cells feature a Sb2S3 nanoparticle film interdigitated by a titania (TiO2) nanorod array with a nanostructured CdS shell as an interfacial layer on each TiO2 nanorod core. Upon understanding the interfacial interactions and band alignments in the TiO2-CdS-Sb2S3 system, the function of the CdS interfacial layer as a band-bended spatial spacer interacting strongly with both the TiO2 electron transporter and Sb2S3 absorber for increasing charge collecting efficiency is revealed; moreover, space-charging the band-bended CdS layer by illumination is found and a photogenerated interfacial dipole electric field model is proposed for understanding the high Voc subjected to the presence of the CdS interfacial layer. This work provides a conceptual guide for designing efficient inorganic heterojunction solar cells.

Subjects

Author keywords

antimony sulfidebulk heterojunctioninterfacial engineeringnanorod arraysolar cells

Authors and institutions

  • Institute of Solid State Physics, HFIPS, Chinese Academy of Sciences, Hefei 230031, P. R. China.
  • University of Science and Technology of China, Hefei 230026, P. R. China.
  • Henan Key Laboratory of Photovoltaic Materials, Henan University, Kaifeng 475004, P. R. China.

ORCID profiles: Zhitao Shen, Huilin Li, Chao Dong, Tao Chen, Shangfeng Yang, Chong Chen, Mingtai Wang

Funding

  • Anhui Postdoctoral Science Foundation
  • Hefei Institutes of Physical Science, Chinese Academy of Sciences
  • Hefei Science Center, Chinese Academy of Sciences
  • National Natural Science Foundation of China

Cite

APA

Liu, R., Shen, Z., Zhu, L., Huang, J., Li, H., Chen, J., Dong, C., Chen, T., Yang, S., Chen, C., & Wang, M. (2023). Space-Charging Interfacial Layer by Illumination for Efficient Sb 2 S 3 Bulk-Heterojunction Solar Cells with High Open-Circuit Voltage. ACS Applied Materials & Interfaces, 15(20), 24583-24594. https://doi.org/10.1021/acsami.3c02843

Vancouver

Liu R, Shen Z, Zhu L, Huang J, Li H, Chen J, et al. Space-Charging Interfacial Layer by Illumination for Efficient Sb 2 S 3 Bulk-Heterojunction Solar Cells with High Open-Circuit Voltage. ACS Applied Materials & Interfaces. 2023;15(20):24583-24594. doi:10.1021/acsami.3c02843

BibTeX
@article{Liu2023,
  author = {Liu, Rong and Shen, Zhitao and Zhu, Liangxin and Huang, Jia and Li, Huilin and Chen, Junwei and Dong, Chao and Chen, Tao and Yang, Shangfeng and Chen, Chong and Wang, Mingtai},
  title = {Space-Charging Interfacial Layer by Illumination for Efficient Sb 2 S 3 Bulk-Heterojunction Solar Cells with High Open-Circuit Voltage},
  journal = {ACS Applied Materials & Interfaces},
  year = {2023},
  volume = {15},
  number = {20},
  pages = {24583--24594},
  doi = {10.1021/acsami.3c02843}
}
Start for free →