EUVIMEDEUVIMED entdecken
Crossref

Geometry Controlled Oscillations in Liquid Crystal Polymer Films Triggered by Thermal Feedback

Divya Jayoti iD, Akhil Reddy Peeketi iD, Pramod Yallappa Kumbhar, Narasimhan Swaminathan iD, Ratna Kumar Annabattula iD

ACS Applied Materials & Interfaces · 12.04.2023 · 15 (14) · 18362-18371

DOI: 10.1021/acsami.3c02472 ↗

Kurz gefasst

Fachartikel in der Zeitschrift ACS Applied Materials & Interfaces, online erschienen am 28.03.2023. Verfasst von Divya Jayoti und 4 weiteren Autor:innen. Beteiligte Einrichtung: Center for Soft and Biological Matter, Indian Institute of Technology Madras, Chennai 600036, India. Die Arbeit wurde bisher 19-mal zitiert (Crossref) und nennt 47 Literaturangaben. Gefördert von: Indian Institute of Technology Madras, Ministry of Education, India.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Light-induced oscillatory behavior of liquid crystal polymer network (LCN) films has been demonstrated by several researchers in the past decade. Similarly, oscillations in LCN films under constant thermal stimulus have been reported recently, although the mechanism and the factors that govern the oscillatory behavior are not well understood. In this work, we study the dynamics of self-sustained oscillations exhibited by LCN films under a constant thermal stimulus through experiments and simulations. Geometrically asymmetric films such as a right triangle and an equilateral triangle are obtained from a twisted nematic square film. A multiphysics computational framework using the finite element method is developed to simulate the oscillatory behavior of the LCN films kept on a hot plate. The framework accounts for a coupling between heat transfer and mechanical deformations during the oscillations. Small temperature fluctuations (≈ 1 °C) coupled with gravity induced torque are shown to drive the oscillatory behavior at a specific plate temperature. We show for the first time that self-sustained oscillations can also be achieved in symmetric shapes, such as square films, by creating a thickness tapering between two opposite edges. The frequency of the oscillations is found to be in the range of 0.5 to 2.5 Hz for different geometries studied. The oscillation temperature depends on the mean thickness, size, and thickness profile of the films. As a possible application, we demonstrate a thermally actuated optical chopper using the oscillatory response of the films.

Schlagwörter

Stichwörter der Autor:innen

finite element methodliquid crystal polymer networksoscillationstaperthermal feedbacktwisted nematic

Autor:innen und Institutionen

  • Center for Soft and Biological Matter, Indian Institute of Technology Madras, Chennai 600036, India.
  • Department of Mechanical Engineering, Indian Institute of Technology Madras, Chennai 600036, India.

ORCID-Profile: Divya Jayoti, Akhil Reddy Peeketi, Narasimhan Swaminathan, Ratna Kumar Annabattula

Förderung

  • Indian Institute of Technology Madras
  • Ministry of Education, India

Zitieren

APA

Jayoti, D., Peeketi, A. R., Kumbhar, P. Y., Swaminathan, N., & Annabattula, R. K. (2023). Geometry Controlled Oscillations in Liquid Crystal Polymer Films Triggered by Thermal Feedback. ACS Applied Materials & Interfaces, 15(14), 18362-18371. https://doi.org/10.1021/acsami.3c02472

Vancouver

Jayoti D, Peeketi AR, Kumbhar PY, Swaminathan N, Annabattula RK. Geometry Controlled Oscillations in Liquid Crystal Polymer Films Triggered by Thermal Feedback. ACS Applied Materials & Interfaces. 2023;15(14):18362-18371. doi:10.1021/acsami.3c02472

BibTeX
@article{Jayoti2023,
  author = {Jayoti, Divya and Peeketi, Akhil Reddy and Kumbhar, Pramod Yallappa and Swaminathan, Narasimhan and Annabattula, Ratna Kumar},
  title = {Geometry Controlled Oscillations in Liquid Crystal Polymer Films Triggered by Thermal Feedback},
  journal = {ACS Applied Materials & Interfaces},
  year = {2023},
  volume = {15},
  number = {14},
  pages = {18362--18371},
  doi = {10.1021/acsami.3c02472}
}
Kostenlos starten →