Toolbox of Advanced Atomic Layer Deposition Processes for Tailoring Large-Area MoS 2 Thin Films at 150 °C
ACS Applied Materials & Interfaces · 2023-07-26 · 15 (29) · 35565-35579
DOI: 10.1021/acsami.3c02466 ↗At a glance
Journal article in ACS Applied Materials & Interfaces, published online on 2023-07-17. Written by Miika Mattinen and 6 co-authors. Institution: Department of Applied Physics and Science Education, Eindhoven University of Technology, PO Box 513, Eindhoven 5600 MB, The Netherlands. Cited 15 times so far (Crossref); 70 references. The full text is freely available (open access, CC BY 4.0). Funded by: Science Foundation Ireland, Nederlandse Organisatie voor Wetenschappelijk Onderzoek.
Abstract (original language)
Two-dimensional MoS2 is a promising material for applications, including electronics and electrocatalysis. However, scalable methods capable of depositing MoS2 at low temperatures are scarce. Herein, we present a toolbox of advanced plasma-enhanced atomic layer deposition (ALD) processes, producing wafer-scale polycrystalline MoS2 films of accurately controlled thickness. Our ALD processes are based on two individually controlled plasma exposures, one optimized for deposition and the other for modification. In this way, film properties can be tailored toward different applications at a very low deposition temperature of 150 °C. For the modification step, either H2 or Ar plasma can be used to combat excess sulfur incorporation and crystallize the films. Using H2 plasma, a higher degree of crystallinity compared with other reported low-temperature processes is achieved. Applying H2 plasma steps periodically instead of every ALD cycle allows for control of the morphology and enables deposition of smooth, polycrystalline MoS2 films. Using an Ar plasma instead, more disordered MoS2 films are deposited, which show promise for the electrochemical hydrogen evolution reaction. For electronics, our processes enable control of the carrier density from 6 × 1016 to 2 × 1021 cm-3 with Hall mobilities up to 0.3 cm2 V-1 s-1. The process toolbox forms a basis for rational design of low-temperature transition metal dichalcogenide deposition processes compatible with a range of substrates and applications.
Subjects
Author keywords
Authors and institutions
- Department of Applied Physics and Science Education, Eindhoven University of Technology, PO Box 513, Eindhoven 5600 MB, The Netherlands.
- Department of Chemistry, University of Michigan, 930 North University Avenue, Ann Arbor, Michigan 48109-1055, United States.
- Tyndall National Institute, University College Cork, Lee Maltings, Dyke Parade, Cork T12 R5CP, Ireland.
- Eurofins Materials Science Netherlands, High Tech Campus 11, Eindhoven 5656 AE, The Netherlands.
ORCID profiles: Miika Mattinen, Rebecca A Dawley, Farzan Gity, Marcel A Verheijen, Wilhelmus M M Kessels, Ageeth A Bol
Funding
- Science Foundation Ireland
- Nederlandse Organisatie voor Wetenschappelijk Onderzoek
Cite
APA
Mattinen, M., Schulpen, J. J. P. M., Dawley, R. A., Gity, F., Verheijen, M. A., Kessels, W. M. M., & Bol, A. A. (2023). Toolbox of Advanced Atomic Layer Deposition Processes for Tailoring Large-Area MoS 2 Thin Films at 150 °C. ACS Applied Materials & Interfaces, 15(29), 35565-35579. https://doi.org/10.1021/acsami.3c02466
Vancouver
Mattinen M, Schulpen JJPM, Dawley RA, Gity F, Verheijen MA, Kessels WMM, et al. Toolbox of Advanced Atomic Layer Deposition Processes for Tailoring Large-Area MoS 2 Thin Films at 150 °C. ACS Applied Materials & Interfaces. 2023;15(29):35565-35579. doi:10.1021/acsami.3c02466
BibTeX
@article{Mattinen2023,
author = {Mattinen, Miika and Schulpen, Jeff J P M and Dawley, Rebecca A and Gity, Farzan and Verheijen, Marcel A and Kessels, Wilhelmus M M and Bol, Ageeth A},
title = {Toolbox of Advanced Atomic Layer Deposition Processes for Tailoring Large-Area MoS 2 Thin Films at 150 °C},
journal = {ACS Applied Materials & Interfaces},
year = {2023},
volume = {15},
number = {29},
pages = {35565--35579},
doi = {10.1021/acsami.3c02466}
}
EUVIMED