Interface Engineering in Perylene Diimide-Based Organic Photovoltaics with Enhanced Photovoltage
ACS Applied Materials & Interfaces · 2023-05-31 · 15 (21) · 25224-25231
DOI: 10.1021/acsami.3c02003 ↗At a glance
Übersichtsarbeit in ACS Applied Materials & Interfaces, published online on 2023-05-16. Written by Aiswarya Abhisek Mohapatra and 10 co-authors. Institution: Solid State and Structural Chemistry Unit, Indian Institute of Science, Bangalore 560012, India. Cited 21 times so far (Crossref); 58 references. Funded by: Engineering and Physical Sciences Research Council, UK Research and Innovation, Bundesministerium f?r Bildung und Forschung.
Abstract (original language)
The introduction of nonfullerene acceptors (NFA) facilitated the realization of high-efficiency organic solar cells (OSCs); however, OSCs suffer from relatively large losses in open-circuit voltage (VOC) as compared to inorganic or perovskite solar cells. Further enhancement in power conversion efficiency requires an increase in VOC. In this work, we take advantage of the high dipole moment of twisted perylene-diimide (TPDI) as a nonfullerene acceptor (NFA) to enhance the VOC of OSCs. In multiple bulk heterojunction solar cells incorporating TPDI with three polymer donors (PTB7-Th, PM6 and PBDB-T), we observed a VOC enhancement by modifying the cathode with a polyethylenimine (PEIE) interlayer. We show that the dipolar interaction between the TPDI NFA and PEIE─enhanced by the general tendency of TPDI to form J-aggregates─plays a crucial role in reducing nonradiative voltage losses under a constant radiative limit of VOC. This is aided by comparative studies with PM6:Y6 bulk heterojunction solar cells. We hypothesize that incorporating NFAs with significant dipole moments is a feasible approach to improving the VOC of OSCs.
Subjects
Author keywords
Authors and institutions
- Solid State and Structural Chemistry Unit, Indian Institute of Science, Bangalore 560012, India.
- Department of Chemistry and Centre for Processable Electronics, Imperial College London, London W12 0BZ, United Kingdom.
- Department of Physics, Imperial College London, London SW7 2AZ, United Kingdom.
- Dresden Integrated Center for Applied Physics and Photonic Materials (IAPP) and Institute of Applied Physics, Technische Universität Dresden, Nöthnitzer Str. 61, 01187 Dresden, Germany.
- SPECIFIC IKC, College of Engineering, Swansea University, Bay Campus, Swansea, Wales SA1 8EN, United Kingdom.
ORCID profiles: Aiswarya Abhisek Mohapatra, Chiara Labanti, Johannes Benduhn, Ji-Seon Kim, James Durrant, Satish Patil
Funding
- Engineering and Physical Sciences Research Council
- UK Research and Innovation
- Bundesministerium f?r Bildung und Forschung
- Science and Engineering Research Board
Cite
APA
Mohapatra, A. A., Pranav, M., Yadav, S., Gangadharappa, C., Wu, J., Labanti, C., Wolansky, J., Benduhn, J., Kim, J. S., Durrant, J., & Patil, S. (2023). Interface Engineering in Perylene Diimide-Based Organic Photovoltaics with Enhanced Photovoltage. ACS Applied Materials & Interfaces, 15(21), 25224-25231. https://doi.org/10.1021/acsami.3c02003
Vancouver
Mohapatra AA, Pranav M, Yadav S, Gangadharappa C, Wu J, Labanti C, et al. Interface Engineering in Perylene Diimide-Based Organic Photovoltaics with Enhanced Photovoltage. ACS Applied Materials & Interfaces. 2023;15(21):25224-25231. doi:10.1021/acsami.3c02003
BibTeX
@article{Mohapatra2023,
author = {Mohapatra, Aiswarya Abhisek and Pranav, Manasi and Yadav, Suraj and Gangadharappa, Chandrasekhar and Wu, Jiaying and Labanti, Chiara and Wolansky, Jakob and Benduhn, Johannes and Kim, Ji-Seon and Durrant, James and Patil, Satish},
title = {Interface Engineering in Perylene Diimide-Based Organic Photovoltaics with Enhanced Photovoltage},
journal = {ACS Applied Materials & Interfaces},
year = {2023},
volume = {15},
number = {21},
pages = {25224--25231},
doi = {10.1021/acsami.3c02003}
}
EUVIMED