EUVIMEDOpdag EUVIMED
Crossref

All-Printed 3D Solid-State Rechargeable Zinc-Air Microbatteries

Gengsheng Liu, Zhaolei Ma, Guoxian Li iD, Wei Yu, Peng Wang iD, Chuizhou Meng iD, Shijie Guo

ACS Applied Materials & Interfaces · 2023-03-15 · 15 (10) · 13073-13085

DOI: 10.1021/acsami.2c22233 ↗

At a glance

Journal article in ACS Applied Materials & Interfaces, published online on 2023-03-03. Written by Gengsheng Liu and 6 co-authors. Institution: State Key Laboratory for Reliability and Intelligence of Electrical Equipment, Hebei Key Laboratory of Smart Sensing and Human-Robot Interaction, Sch…. Cited 25 times so far (Crossref); 80 references. Funded by: Natural Science Foundation of Hebei Province, Science Foundation for Youths of Hebei Province.

AbstractSubjectsBibliografiske oplysningerCiteRelated studies

Abstract (original language)

Lightweight, compact, integrated, and miniaturized energy devices are under high pursuit for portable and wearable electronics. However, improving the energy density per area still remains a long-standing challenge. Herein, we report the design and fabrication of a solid-state zinc-air microbattery (ZAmB) by a facile 3D direct printing technique. The interdigital electrodes, gel electrolyte, and encapsulation frame are all printed with a customized design by optimzing the composition of the printing inks to obtain the best battery performance. Multiple layers of interdigital electrodes are sequentially printed with a fine overlap to achieve an ultrahigh thickness of 2.5 mm for a remarkably increased specific areal energy of up to 77.2 mWh cm-2. To meet the practical powering requirements for different output voltages and currents, battery modules consisting of individual ZAmBs connected in series or parallel or a combination of the two are printed with a facile integration to external loads. Powering of LEDs, digital watch, and a miniature rotary motor and even charging of a smartphone by the printed ZAmB modules are successfully demonstrated. The versatile 3D direct printing technique enables the fabricated ZAmBs with an adjustable form factor and integration capability with other electronics, paving the way for exploring new energy systems with diverse structures and extended functionalities.

Subjects

Author keywords

3D printinggel polymer electrolyteinterdigital electrodemicrobatterysolid-statezinc-air battery

Authors and institutions

  • State Key Laboratory for Reliability and Intelligence of Electrical Equipment, Hebei Key Laboratory of Smart Sensing and Human-Robot Interaction, School of Mechanical Engineering, Hebei University of Technology, Tianjin…

ORCID profiles: Guoxian Li, Peng Wang, Chuizhou Meng

Funding

  • Natural Science Foundation of Hebei Province
  • Science Foundation for Youths of Hebei Province

Cite

APA

Liu, G., Ma, Z., Li, G., Yu, W., Wang, P., Meng, C., & Guo, S. (2023). All-Printed 3D Solid-State Rechargeable Zinc-Air Microbatteries. ACS Applied Materials & Interfaces, 15(10), 13073-13085. https://doi.org/10.1021/acsami.2c22233

Vancouver

Liu G, Ma Z, Li G, Yu W, Wang P, Meng C, et al. All-Printed 3D Solid-State Rechargeable Zinc-Air Microbatteries. ACS Applied Materials & Interfaces. 2023;15(10):13073-13085. doi:10.1021/acsami.2c22233

BibTeX
@article{Liu2023,
  author = {Liu, Gengsheng and Ma, Zhaolei and Li, Guoxian and Yu, Wei and Wang, Peng and Meng, Chuizhou and Guo, Shijie},
  title = {All-Printed 3D Solid-State Rechargeable Zinc-Air Microbatteries},
  journal = {ACS Applied Materials & Interfaces},
  year = {2023},
  volume = {15},
  number = {10},
  pages = {13073--13085},
  doi = {10.1021/acsami.2c22233}
}
Start for free →