EUVIMEDObjevte EUVIMED
Crossref

Superhydrophobic and Conductive Foams with Antifouling and Oil–Water Separation Properties

Ekrem Ozkan, Mark Garren iD, James Manuel, Megan Douglass, Ryan Devine, Arnab Mondal iD, Anil Kumar, Morgan Ashcraft, Rashmi Pandey, Hitesh Handa iD

ACS Applied Materials & Interfaces · 2023-02-08 · 15 (5) · 7610-7626

DOI: 10.1021/acsami.2c22180 ↗

At a glance

Journal article in ACS Applied Materials & Interfaces, published online on 2023-01-26. Written by Ekrem Ozkan and 9 co-authors. Institution: School of Chemical, Materials and Biomedical Engineering, College of Engineering, University of Georgia, Athens, Georgia 30602, United States. Cited 53 times so far (Crossref); 69 references. Funded by: National Heart, Lung, and Blood Institute, National Science Foundation.

AbstraktSubjectsBibliografické údajeCiteRelated studies

Abstract (original language)

Hybrid organic-inorganic materials are attracting enormous interest in materials science due to the combination of multiple advantageous properties of both organic and inorganic components. Taking advantage of a simple, scalable, solvent-free hard-sacrificial method, we report the successful fabrication of three-dimensional hybrid porous foams by integrating two types of fillers into a poly(dimethylsiloxane) (PDMS) framework. These fillers consist of hydrophobic electrically conductive graphene (GR) nanoplatelets and hydrophobic bactericidal copper (Cu) microparticles. The fillers were utilized to create the hierarchical rough structure with low-surface-energy properties on the PDMS foam surfaces, leading to remarkable superhydrophobicity/superoleophilicity with contact angles of 158 and 0° for water and oil, respectively. The three-dimensional interconnected porous foam structures facilitated high oil adsorption capacity and excellent reusability as well as highly efficient oil/organic solvent-water separation in turbulent, corrosive, and saline environments. Moreover, the introduction of the fillers led to a significant improvement in the electrical conductivity and biofouling resistance (vs whole blood, fibrinogen, platelet cells, and Escherichia coli) of the foams. We envision that the developed composite strategy will pave a facile, scalable, and effective way for fabricating novel multifunctional hybrid materials with ideal properties that may find potential use in a broad range of biomedical, energy, and environmental applications.

Subjects

Author keywords

antifoulingconductivitygraphenesuperhydrophobicsuperoleophilic

Authors and institutions

  • School of Chemical, Materials and Biomedical Engineering, College of Engineering, University of Georgia, Athens, Georgia 30602, United States.
  • Pharmaceutical and Biomedical Sciences Department, College of Pharmacy, University of Georgia, Athens, Georgia 30602, United States.

ORCID profiles: Mark Garren, Arnab Mondal, Hitesh Handa

Funding

  • National Heart, Lung, and Blood Institute
  • National Science Foundation

Cite

APA

Ozkan, E., Garren, M., Manuel, J., Douglass, M., Devine, R., Mondal, A., Kumar, A., Ashcraft, M., Pandey, R., & Handa, H. (2023). Superhydrophobic and Conductive Foams with Antifouling and Oil–Water Separation Properties. ACS Applied Materials & Interfaces, 15(5), 7610-7626. https://doi.org/10.1021/acsami.2c22180

Vancouver

Ozkan E, Garren M, Manuel J, Douglass M, Devine R, Mondal A, et al. Superhydrophobic and Conductive Foams with Antifouling and Oil–Water Separation Properties. ACS Applied Materials & Interfaces. 2023;15(5):7610-7626. doi:10.1021/acsami.2c22180

BibTeX
@article{Ozkan2023,
  author = {Ozkan, Ekrem and Garren, Mark and Manuel, James and Douglass, Megan and Devine, Ryan and Mondal, Arnab and Kumar, Anil and Ashcraft, Morgan and Pandey, Rashmi and Handa, Hitesh},
  title = {Superhydrophobic and Conductive Foams with Antifouling and Oil–Water Separation Properties},
  journal = {ACS Applied Materials & Interfaces},
  year = {2023},
  volume = {15},
  number = {5},
  pages = {7610--7626},
  doi = {10.1021/acsami.2c22180}
}
Start for free →