EUVIMEDObjevte EUVIMED
Open access · CC BY-NC-ND 4.0

Electronic Packaging Enhancement Engineered by Reducing the Bonding Temperature via Modified Cure Cycles

Seong Yeon Park, Seung Yoon On, Junmo Kim, Jeonyoon Lee iD, Taek-Soo Kim iD, Brian L Wardle iD, Seong Su Kim iD

ACS Applied Materials & Interfaces · 2023-03-01 · 15 (8) · 11024-11032

DOI: 10.1021/acsami.2c21229 ↗

At a glance

Journal article in ACS Applied Materials & Interfaces, published online on 2023-01-25. Written by Seong Yeon Park and 6 co-authors. Institution: Department of Mechanical Engineering, Korea Advanced Institute of Science and Technology (KAIST), 291 Daehak-ro, Yuseong-gu, Daejeon305-701, Republic…. Cited 23 times so far (Crossref); 46 references. The full text is freely available (open access, CC BY-NC-ND 4.0). Funded by: National Research Foundation of Korea.

AbstraktSubjectsBibliografické údajeCiteRelated studies

Abstract (original language)

Semiconductor packaging continues to reduce in thickness following the overall thinning of electronic devices such as smartphones and tablets. As the package becomes thinner, the warpage of the semiconductor package becomes more important due to the reduced bending stiffness and driven by thermal residual stresses and thermal expansion mismatch during the epoxy molding compound (EMC) curing to create the package. To address this packaging reliability issue, in this study, we developed a modified cure cycle that adds a rapid cooling step to the conventional cure cycle (CCC) to enhance the reliability of the EMC molded to a copper substrate (EMC/Cu bi-layer package) by lowering the bonding temperature of the EMC/Cu bi-layer package. Modeling of the package via Timoshenko theory including effective cure shrinkage allowed the rapid cooling step to be quantified and confirmed via experiments. The modified cure cycle resulted in a 26% reduction in residual strain, a 27% reduction in curvature, and a 40% increase in peel strength compared to the CCC, suggesting that this is an effective new method for managing warping effects in such packaged structures.

Subjects

Author keywords

bonding temperaturecure cyclecure shrinkagecurvaturesemiconductor package

Authors and institutions

  • Department of Mechanical Engineering, Korea Advanced Institute of Science and Technology (KAIST), 291 Daehak-ro, Yuseong-gu, Daejeon305-701, Republic of Korea.
  • Department of Aerospace Engineering, Korea Advanced Institute of Science and Technology (KAIST), 291 Daehak-ro, Yuseong-gu, Daejeon305-701, Republic of Korea.
  • Department of Aeronautics and Astronautics, Massachusetts Institute of Technology, 77 Massachusetts Ave, Cambridge, Massachusetts02139, United States.
  • Department of Mechanical Engineering, Massachusetts Institute of Technology, 77 Massachusetts Ave, Cambridge, Massachusetts02139, United States.

ORCID profiles: Jeonyoon Lee, Taek-Soo Kim, Brian L Wardle, Seong Su Kim

Funding

  • National Research Foundation of Korea

Cite

APA

Park, S. Y., On, S. Y., Kim, J., Lee, J., Kim, T. S., Wardle, B. L., & Kim, S. S. (2023). Electronic Packaging Enhancement Engineered by Reducing the Bonding Temperature via Modified Cure Cycles. ACS Applied Materials & Interfaces, 15(8), 11024-11032. https://doi.org/10.1021/acsami.2c21229

Vancouver

Park SY, On SY, Kim J, Lee J, Kim TS, Wardle BL, et al. Electronic Packaging Enhancement Engineered by Reducing the Bonding Temperature via Modified Cure Cycles. ACS Applied Materials & Interfaces. 2023;15(8):11024-11032. doi:10.1021/acsami.2c21229

BibTeX
@article{Park2023,
  author = {Park, Seong Yeon and On, Seung Yoon and Kim, Junmo and Lee, Jeonyoon and Kim, Taek-Soo and Wardle, Brian L and Kim, Seong Su},
  title = {Electronic Packaging Enhancement Engineered by Reducing the Bonding Temperature via Modified Cure Cycles},
  journal = {ACS Applied Materials & Interfaces},
  year = {2023},
  volume = {15},
  number = {8},
  pages = {11024--11032},
  doi = {10.1021/acsami.2c21229}
}
Start for free →