Noble Metal Nanoparticles Decorated Boron Nitride Nanotubes for Efficient and Selective Low-Temperature Catalytic Reduction of Nitric Oxide with Carbon Monoxide
ACS Applied Materials & Interfaces · 01.03.2023 · 15 (8) · 10670-10678
DOI: 10.1021/acsami.2c20985 ↗Kurz gefasst
Fachartikel in der Zeitschrift ACS Applied Materials & Interfaces, online erschienen am 13.02.2023. Verfasst von Ki-In Choi und 6 weiteren Autor:innen. Beteiligte Einrichtung: R&D Center, NAiEEL Technology, 6-2 Yuseongdaero 1205, Daejeon 34104, Republic of Korea. Die Arbeit wurde bisher 21-mal zitiert (Crossref) und nennt 70 Literaturangaben. Gefördert von: Ministry of SMEs and Startups, The Ministry of Trade, Industry and Energy (MOTIE), Republic of Korea.
Abstract (Originalsprache)
Parallel to CO2 emission, NOx emission has become one of the menacing problems that seek a simple, durable, and high-efficiency deNOx catalyst. Herein, we demonstrated simple syntheses of platinum group metal nanoparticle-decorated f-BNNT (PGM = Pd, Pt, and Rh, and f-BNNT stands for -OH-functionalized boron nitride nanotubes) as a catalyst for efficient and selective reduction of NO by CO at low-temperature conditions. PGM/f-BNNT with a low amount of noble metal nanoparticles (0.7-0.8 wt %) presents very efficient catalytic activity for NO reduction as well as CO oxidation during their removal process. The removal efficiencies of NO and CO with Pd/f-BNNT, Pt/f-BNNT, and Rh/f-BNNT catalysts were investigated under various temperatures, flow rates, and reaction times, respectively. For most cases, NO catalytic reduction with CO reaction was >99% at a temperature as low as ∼200 °C. The catalyst robustness and efficiency were also verified by presenting almost 100% conversion of NO using a Rh/f-BNNT catalyst, which was aged under humid air at 600 and 700 °C for 24 h, respectively. The synergic effect of the catalytic efficacy of the well-dispersed noble metal nanoparticles and the excellent surface properties of BNNT are reasons for the high selectivity and catalytic property at a low temperature. On the basis of this investigation, we demonstrated that the noble metal nanoparticle-decorated f-BNNT catalysts are possible to save expensive PGM catalysts, such as Pt, Pd, and Rd, as much as 100 times while presenting similar or better catalytic performance for simultaneous NO and CO removals.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- R&D Center, NAiEEL Technology, 6-2 Yuseongdaero 1205, Daejeon 34104, Republic of Korea.
- Materials Science and Chemical Engineering Department, Stony Brook University, Stony Brook, New York 11794, United States.
ORCID-Profile: Dolly Yadav, Junghwan Jung, Taejin Kim, Jaewoo Kim
Förderung
- Ministry of SMEs and Startups
- The Ministry of Trade, Industry and Energy (MOTIE), Republic of Korea
Zitieren
APA
Choi, K. I., Yadav, D., Jung, J., Park, E., Lee, K. M., Kim, T., & Kim, J. (2023). Noble Metal Nanoparticles Decorated Boron Nitride Nanotubes for Efficient and Selective Low-Temperature Catalytic Reduction of Nitric Oxide with Carbon Monoxide. ACS Applied Materials & Interfaces, 15(8), 10670-10678. https://doi.org/10.1021/acsami.2c20985
Vancouver
Choi KI, Yadav D, Jung J, Park E, Lee KM, Kim T, et al. Noble Metal Nanoparticles Decorated Boron Nitride Nanotubes for Efficient and Selective Low-Temperature Catalytic Reduction of Nitric Oxide with Carbon Monoxide. ACS Applied Materials & Interfaces. 2023;15(8):10670-10678. doi:10.1021/acsami.2c20985
BibTeX
@article{Choi2023,
author = {Choi, Ki-In and Yadav, Dolly and Jung, Junghwan and Park, Eunkwang and Lee, Kyung-Min and Kim, Taejin and Kim, Jaewoo},
title = {Noble Metal Nanoparticles Decorated Boron Nitride Nanotubes for Efficient and Selective Low-Temperature Catalytic Reduction of Nitric Oxide with Carbon Monoxide},
journal = {ACS Applied Materials & Interfaces},
year = {2023},
volume = {15},
number = {8},
pages = {10670--10678},
doi = {10.1021/acsami.2c20985}
}
EUVIMED