EUVIMEDSkopri EUVIMED
Crossref

Rapid Printing of High-Temperature Polymer-Derived Ceramic Composite Thin-Film Thermistor with Laser Pyrolysis

Lida Xu iD, Lanlan Li, Lantian Tang, Yingjun Zeng iD, Guochun Chen, Chenhe Shao, Chao Wu, Gonghan He, Qinnan Chen, Guicai Fang, Daoheng Sun, Zhenyin Hai iD

ACS Applied Materials & Interfaces · 2023-02-22 · 15 (7) · 9996-10005

DOI: 10.1021/acsami.2c20927 ↗

At a glance

Journal article in ACS Applied Materials & Interfaces, published online on 2023-02-13. Written by Lida Xu and 11 co-authors. Institution: School of Aerospace Engineering, and Discipline of Intelligent Instrument and Equipment, Xiamen University, Xiamen 361102, China. Cited 41 times so far (Crossref); 69 references. Funded by: Ministry of Science and Technology of the People's Republic of China, National Natural Science Foundation of China.

AstrattSubjectsDettalji biblijografiċiCiteRelated studies

Abstract (original language)

Polymer-derived ceramic (PDC)-based high-temperature thin-film sensors (HTTFSs) exhibit promising applications in the condition monitoring of critical components in aerospace. However, fabricating PDC-based HTTFS integrated with high-efficiency, high-temperature anti-oxidation, and customized patterns remains challenging. In this work, we introduce a rapid and flexible selecting laser pyrolysis combined with a direct ink writing process to print double-layer high-temperature antioxidant PDC composite thin-film thermistors under ambient conditions. The sensitive layer (SL) was directly written on an insulating substrate with excellent conductivity by laser-induced graphitization. Then, the antioxidant layer (AOL) was written on the surface of the SL to realize the integrated manufacturing of double-functional layers. Through characterization analysis, it was shown that B2O3 and SiO2 glass phases generated by the PDC composite AOL could effectively prevent oxygen intrusion. Therefore, the fabricated PDC composite thermistors exhibited a negative temperature coefficient in the temperature range from 100 to 1100 °C and high repeatability below 800 °C. Meanwhile, it has excellent high-temperature stability at 800 °C with a resistance change of only 2.4% in 2 h. Furthermore, the high-temperature electrical behavior of the thermistor was analyzed. The temperature dependence of the conductivity for this thermistor has shown an agreement with the Mott's variable range hopping mechanism. Additionally, the thermistor was fabricated on the surface of an aero-engine blade to verify its feasibility below 800 °C, showing the great potential of this work for state sensing on the surface of high-temperature components, especially for customized requirements.

Subjects

Author keywords

direct ink writinghigh-temperature oxidation resistancelaser pyrolysispolymer-derived ceramicthin film thermistorsturbine blade

Authors and institutions

  • School of Aerospace Engineering, and Discipline of Intelligent Instrument and Equipment, Xiamen University, Xiamen 361102, China.
  • Department of Mechanical and Electrical Engineering, School of Aerospace Engineering, Xiamen University, Xiamen 361102, China.
  • Fujian Micro/Nano Manufacturing Engineering Technology Research Center, Xiamen University, Xiamen 361102, China.
  • Aerospace Technology Institute, China Aerodynamics Research and Development Center, Mianyang 621000, China.

ORCID profiles: Lida Xu, Yingjun Zeng, Zhenyin Hai

Funding

  • Ministry of Science and Technology of the People's Republic of China
  • National Natural Science Foundation of China

Cite

APA

Xu, L., Li, L., Tang, L., Zeng, Y., Chen, G., Shao, C., Wu, C., He, G., Chen, Q., Fang, G., Sun, D., & Hai, Z. (2023). Rapid Printing of High-Temperature Polymer-Derived Ceramic Composite Thin-Film Thermistor with Laser Pyrolysis. ACS Applied Materials & Interfaces, 15(7), 9996-10005. https://doi.org/10.1021/acsami.2c20927

Vancouver

Xu L, Li L, Tang L, Zeng Y, Chen G, Shao C, et al. Rapid Printing of High-Temperature Polymer-Derived Ceramic Composite Thin-Film Thermistor with Laser Pyrolysis. ACS Applied Materials & Interfaces. 2023;15(7):9996-10005. doi:10.1021/acsami.2c20927

BibTeX
@article{Xu2023,
  author = {Xu, Lida and Li, Lanlan and Tang, Lantian and Zeng, Yingjun and Chen, Guochun and Shao, Chenhe and Wu, Chao and He, Gonghan and Chen, Qinnan and Fang, Guicai and Sun, Daoheng and Hai, Zhenyin},
  title = {Rapid Printing of High-Temperature Polymer-Derived Ceramic Composite Thin-Film Thermistor with Laser Pyrolysis},
  journal = {ACS Applied Materials & Interfaces},
  year = {2023},
  volume = {15},
  number = {7},
  pages = {9996--10005},
  doi = {10.1021/acsami.2c20927}
}
Start for free →