EUVIMEDSkopri EUVIMED
Crossref

Regulating the MXene–Zinc Interfacial Structure toward a Highly Revisable Metal Anode of Zinc–Air Batteries

Di Yang, Jinsheng Li, Changpeng Liu iD, Junjie Ge iD, Wei Xing, Jianbing Zhu iD

ACS Applied Materials & Interfaces · 2023-03-01 · 15 (8) · 10651-10659

DOI: 10.1021/acsami.2c20701 ↗

At a glance

Journal article in ACS Applied Materials & Interfaces, published online on 2023-02-17. Written by Di Yang and 5 co-authors. Institution: State Key Laboratory of Electroanalytical Chemistry, Changchun Institute of Applied Chemistry, Chinese Academy of Sciences, Changchun, Jilin 130022, …. Cited 28 times so far (Crossref); 42 references. Funded by: Ministry of Science and Technology of the People's Republic of China, National Natural Science Foundation of China.

AstrattSubjectsDettalji biblijografiċiCiteRelated studies

Abstract (original language)

Rechargeable aqueous Zn-air batteries have been regarded as one of the most promising systems for flexible energy storage devices due to their high specific energy, safety, and cost effectiveness. However, Zn metal anodes exposed to strong alkaline electrolytes suffer from several issues such as corrosion, dissolution, and passivation, resulting in extremely poor cycle reversibility. Motivated by this challenge, we herein strategically design an MXene/Zn metal anode interfacial structure with single/few-layer Ti3C2Tx MXene as a protective layer. Such a design not only isolates the direct contact between Zn metal anodes and electrolytes but also inhibits zincate dissolution due to the ion screening function of Ti3C2Tx, potentially addressing the stubborn issues that Zn anodes faced with. As a result, the Ti3C2Tx-protected Zn metal anode exhibits superior cycle stability (stable for more than 400 cycles) to the bare Zn counterpart (20 cycles) at a high current density of 5.0 mA cm-2. When integrated into Zn-air coin cells, it has a high depth of discharge of 91% and operates stably for 140 cycles with small resistance. More interestingly, the excellent flexibility of the as-designed Ti3C2Tx-protected Zn metal anode endows the quasi-solid-state batteries with admirable voltage stability at different bending angles from 0 to 180°.

Subjects

Author keywords

MXene layerinterfacial structurestrong alkaline electrolytezinc metal anodezinc−air battery

Authors and institutions

  • State Key Laboratory of Electroanalytical Chemistry, Changchun Institute of Applied Chemistry, Chinese Academy of Sciences, Changchun, Jilin 130022, P.R. China.
  • School of Applied Chemistry and Engineering, University of Science and Technology of China, Hefei, Anhui 230026, P.R. China.

ORCID profiles: Changpeng Liu, Junjie Ge, Jianbing Zhu

Funding

  • Ministry of Science and Technology of the People's Republic of China
  • National Natural Science Foundation of China

Cite

APA

Yang, D., Li, J., Liu, C., Ge, J., Xing, W., & Zhu, J. (2023). Regulating the MXene–Zinc Interfacial Structure toward a Highly Revisable Metal Anode of Zinc–Air Batteries. ACS Applied Materials & Interfaces, 15(8), 10651-10659. https://doi.org/10.1021/acsami.2c20701

Vancouver

Yang D, Li J, Liu C, Ge J, Xing W, Zhu J. Regulating the MXene–Zinc Interfacial Structure toward a Highly Revisable Metal Anode of Zinc–Air Batteries. ACS Applied Materials & Interfaces. 2023;15(8):10651-10659. doi:10.1021/acsami.2c20701

BibTeX
@article{Yang2023,
  author = {Yang, Di and Li, Jinsheng and Liu, Changpeng and Ge, Junjie and Xing, Wei and Zhu, Jianbing},
  title = {Regulating the MXene–Zinc Interfacial Structure toward a Highly Revisable Metal Anode of Zinc–Air Batteries},
  journal = {ACS Applied Materials & Interfaces},
  year = {2023},
  volume = {15},
  number = {8},
  pages = {10651--10659},
  doi = {10.1021/acsami.2c20701}
}
Start for free →