Hydrogen Bonding of Aramid Boosts High-Temperature Capacitive Properties of Polyetherimide Blends
ACS Applied Materials & Interfaces · 2023-02-15 · 15 (6) · 8471-8479
DOI: 10.1021/acsami.2c20558 ↗At a glance
Journal article in ACS Applied Materials & Interfaces, published online on 2023-02-01. Written by Chenyi Zhou and 8 co-authors. Institution: National and Local Joint Engineering Laboratory for Synthetic Technology of High-Performance Polymer, Jilin University, Changchun, Jilin130012, China. Cited 55 times so far (Crossref); 47 references. Funded by: Department of Science and Technology of Jilin Province.
Abstract (original language)
Polyetherimide (PEI) is the state-of-the-art commercial high-temperature polymer dielectric with excellent thermal and chemical stability and relatively high high-temperature capacitive energy storage properties. The rotation of the dipoles in the PEI chains brings the β-relaxation which seriously increases the leakage current and decreases the charge-discharge efficiency. In this work, hydrogen bonds have been introduced to limit the dipole rotation of PEI by blending aramids [1,4-poly(ether fluoromethyl naphthalene amide), PNFA] into the PEI matrix. By introducing 10 wt % PNFA, the β-relaxation of the blend has been significantly reduced which could be observed from the dielectric spectrum. To explore the mechanism of limited β-relaxation, we analyze the hydrogen bonds in the blend films by infrared spectroscopy and found that the maximum content of hydrogen-bonded carbonyl formed between PNFA and PEI chains was 14.3% when the content of PNFA was 30 wt %. The content of hydrogen bonds formed between PNFA and PEI was positively correlated with the energy storage performance of the blends. The maximum discharged energy density with an efficiency above 90% of the blend film with 30 wt % PNFA reaches 4.1 J cm-3 at 150 °C, which is about 350% higher than that of pristine PEI. This work shows that composing hydrogen bonds by the blending method could be a viable strategy for enhancing the high-temperature energy storage performance of polymer dielectrics, which could be achieved by large-scale preparation and has feasible industrial production prospects.
Subjects
Author keywords
Authors and institutions
- National and Local Joint Engineering Laboratory for Synthetic Technology of High-Performance Polymer, Jilin University, Changchun, Jilin130012, China.
- College of Materials Science and Engineering, Jilin University, Changchun, Jilin130012, China.
ORCID profiles: Wenhan Xu, Yunhe Zhang, Chunling Zhang, Yingshuang Shang, Haibo Zhang
Funding
- Department of Science and Technology of Jilin Province
Cite
APA
Zhou, C., Xu, W., Zhang, Y., Yu, C., Liu, X., Jiang, Z., Zhang, C., Shang, Y., & Zhang, H. (2023). Hydrogen Bonding of Aramid Boosts High-Temperature Capacitive Properties of Polyetherimide Blends. ACS Applied Materials & Interfaces, 15(6), 8471-8479. https://doi.org/10.1021/acsami.2c20558
Vancouver
Zhou C, Xu W, Zhang Y, Yu C, Liu X, Jiang Z, et al. Hydrogen Bonding of Aramid Boosts High-Temperature Capacitive Properties of Polyetherimide Blends. ACS Applied Materials & Interfaces. 2023;15(6):8471-8479. doi:10.1021/acsami.2c20558
BibTeX
@article{Zhou2023,
author = {Zhou, Chenyi and Xu, Wenhan and Zhang, Yunhe and Yu, Chang and Liu, Xin and Jiang, Zilong and Zhang, Chunling and Shang, Yingshuang and Zhang, Haibo},
title = {Hydrogen Bonding of Aramid Boosts High-Temperature Capacitive Properties of Polyetherimide Blends},
journal = {ACS Applied Materials & Interfaces},
year = {2023},
volume = {15},
number = {6},
pages = {8471--8479},
doi = {10.1021/acsami.2c20558}
}
EUVIMED