EUVIMEDOpdag EUVIMED
Crossref

Reactivity of Lattice Oxygen in Ti-Site-Substituted SrTiO 3 Perovskite Catalysts

Yuji Yoshiyama, Saburo Hosokawa iD, Masaaki Haneda, Masashige Morishita, Hiroyuki Asakura, Kentaro Teramura iD, Tsunehiro Tanaka iD

ACS Applied Materials & Interfaces · 2023-02-01 · 15 (4) · 5293-5300

DOI: 10.1021/acsami.2c20165 ↗

At a glance

Journal article in ACS Applied Materials & Interfaces, published online on 2023-01-20. Written by Yuji Yoshiyama and 6 co-authors. Institution: Department of Molecular Engineering, Graduate School of Engineering, Kyoto University, Kyotodaigaku Katsura, Nishikyo-ku, Kyoto615-8510, Japan. Cited 18 times so far (Crossref); 39 references. Funded by: Ministry of Education, Culture, Sports, Science and Technology.

AbstractSubjectsBibliografiske oplysningerCiteRelated studies

Abstract (original language)

An environmental catalyst in which a transition metal (Mn, Fe, or Co) was substituted into the Ti site of the host material, SrTiO3, was synthesized, and the reactivity of lattice oxygen was evaluated. For CO oxidation, Mn- and Co-doped SrTiO3 catalysts, which provided high thermal stabilities, exhibited higher activities than Pt/Al2O3 catalysts despite their low surface areas. Temperature-programmed reduction experiments using X-ray absorption fine structure (XAFS) measurements showed that the lattice oxygen of Co-doped catalyst was released at the lowest temperature. Isotopic experiments with CO and 18O2 revealed that the lattice oxygen was involved in CO oxidation on Fe- and Co-doped catalysts; that is, CO oxidation on these catalysts proceeded via the Mars-van Krevelen mechanism. On the other hand, for Mn-doped catalyst, the contribution of lattice oxygen to CO oxidation was relatively negligible, indicating that the reaction proceeded according to the Langmuir-Hinshelwood mechanism. This paper clearly demonstrates that the catalytic mechanism can be adjusted by substituting transition metals into SrTiO3.

Subjects

Author keywords

CO oxidationMars−van Krevelen mechanismisotopic experimentoxygen storage materialperovskite structure

Authors and institutions

  • Department of Molecular Engineering, Graduate School of Engineering, Kyoto University, Kyotodaigaku Katsura, Nishikyo-ku, Kyoto615-8510, Japan.
  • Faculty of Materials Science and Engineering, Kyoto Institute of Technology, Matsugasaki, Sakyo-ku, Kyoto606-8585, Japan.
  • Elements Strategy Initiative for Catalysts & Batteries (ESICB), Kyoto University, 1-30 Goryo-Ohara, Nishikyo-ku, Kyoto615-8245, Japan.
  • Advanced Ceramics Research Center, Nagoya Institute of Technology, 10-6-29 Asahigaoka, Tajimi, Gifu507-0071, Japan.

ORCID profiles: Saburo Hosokawa, Kentaro Teramura, Tsunehiro Tanaka

Funding

  • Ministry of Education, Culture, Sports, Science and Technology

Cite

APA

Yoshiyama, Y., Hosokawa, S., Haneda, M., Morishita, M., Asakura, H., Teramura, K., & Tanaka, T. (2023). Reactivity of Lattice Oxygen in Ti-Site-Substituted SrTiO 3 Perovskite Catalysts. ACS Applied Materials & Interfaces, 15(4), 5293-5300. https://doi.org/10.1021/acsami.2c20165

Vancouver

Yoshiyama Y, Hosokawa S, Haneda M, Morishita M, Asakura H, Teramura K, et al. Reactivity of Lattice Oxygen in Ti-Site-Substituted SrTiO 3 Perovskite Catalysts. ACS Applied Materials & Interfaces. 2023;15(4):5293-5300. doi:10.1021/acsami.2c20165

BibTeX
@article{Yoshiyama2023,
  author = {Yoshiyama, Yuji and Hosokawa, Saburo and Haneda, Masaaki and Morishita, Masashige and Asakura, Hiroyuki and Teramura, Kentaro and Tanaka, Tsunehiro},
  title = {Reactivity of Lattice Oxygen in Ti-Site-Substituted SrTiO 3 Perovskite Catalysts},
  journal = {ACS Applied Materials & Interfaces},
  year = {2023},
  volume = {15},
  number = {4},
  pages = {5293--5300},
  doi = {10.1021/acsami.2c20165}
}
Start for free →